Share your ROUTE v2.0 Experience

Can someone please email me the dumps, I’m testing 4/22 please?

mail jlrivera11 at gmail.c o m

Thanks in advance.

@Scolari
Thanks for the answer and the link you provided helps me understand it very well.

@Anonymous
for the LAB exam. Is it OSPF sim or OSPF Eval Sim?

A Multicast application must be accessible between sites, but not accessible outside of the organization. Based on scoping requirements, the multicast group address for the application will be allocated out of which range?

A. FF0E::/16
B. FF08::/16
C. FF0D::/16
D. FF02::/16

A or D

Which answer is correct and why?

Or is correct answer:

FF08::/16

I need help with this question:

A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?

A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol

Which answer is correct? I know that ip help-address work on interface mode only so A is wrong.

Ip forward – protocol works in global mode however ip DHCP relay forwards packet in global mode and works with DHCP services not service DHCP

@scolari
For trap question correct answers are A and D
@SMB
D is worng because in ipv6 there is no hop limit
Correct answers would be BCE because flow label may be used for DOS attack. Flow label is associated with source, destination addresses
@zero Zero
Multicast for site local …. answer FF08::/16
For the dhcp forwarding question
Route_march_2019 pdf has a nice explanation,
Correct answer is B. Ip dhcp relay

@Saji

Thanks for the help!

@Zero Zero –
A packet capture indicates that the Router is not forwarding DHCP packets that it receives on Interface Fa0/0. Which command needs to be entered in global configuration mode to resolve the issue ?
A. ip helper-address
B. ip DHCP relay
C. Service DHCP
D. Ip forward-protocol

Well ,I will suggest option C. Service DHCP. Can you enter it in global configuration ? Yes – but importantly if this command is not configured , DHCP packets will not be relayed through Ip helper statement . So in a sense ,this command is a precursor to the ip helper-address . For further info see here :www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp/command/iap-cr-book/iap-i1.html#wp1413119578 and also see here :www.cisco.com/c/en/us/td/docs/switches/lan/cisco_ie3000/software/release/12-2_44_ex/configuration/guide/scg1/swdhcp82.html#wp1218221 ( under configuring dhcp relay agent ) Cheers !

Gonna be sharing some of the questions that came out in my exam yesterday.

Dear @IB,
I would like you to send me the dump you studied
bara2 . syr @ hotmail . com

Passed my exam today.
Plenty new multi answer questions that are not here.
PBR, OSPF, EIGRP OSPF REDISTRIBUTION.
plenty DnD, frame relay, AAA, ipv6,(SVC, LMI,DLCI,PVC).
read the SIM very well some changed parameters especially EIGRP OSPF redistribution for the second router (delay value)

which logical operator do you use to ensure that the status of an object track list is up only when all configured objects are up.

which cli command can you enter to permit or deny ipv6 traffic traveling through an interface.

Some of yesterday questions,More still coming

Failed my exam some days ago.

Labs/Sims; PBR, OSPF, EIGRP OSPF REDISTRIBUTION
DnD; (SVC, LMI,DLCI,PVC), NAT64/NPTv6, others i will lookup later

A lot (12+) of multi answer questions that are not in MPQ and NUQ5.
Some of them are from the older questions on this site.
(dhcp snooping, MPP, fragmentation difference between ipv4 ipv6, dual stack, threshold action, password encryption on router, BGP load balancing max default paths, aaa authentication command needed for pap, ipv6 traffic filter/access class, ospf router replacement interface doesn’t come up)

@IB
I also got the question you mentioned. Hope you can post some more!

Which cli command can you enter to permit or deny ipv6 traffic traveling through an interface.
The answers i remember;
True
Xor
Or
And

Right answer i guess is “And”

Which cli command can you enter to permit or deny ipv6 traffic traveling through an interface.
– ipv6 traffic-filter

which logical operator do you use to ensure that the status of an object track list is up only when all configured objects are up.
– AND

Just passed the CCNP-ROUTE-300-101.
827

I would recommend to go through all the questions in the “New Updated Questions – Part 5”.
I knew 80% of the questions, and the labs were the same.

good luck guys and thank you digital tut!

Can anyone help me to find “New Updated Questions – Part 5”

thank you to all

hi, i failed today, 779 points…. (only one question to pass!) :(

lab sims PBR, EIGRP – OSPF redistribution

a lot of new questions, SNMP traps vs informs, another one about which protocol uses passive-interface (i don’t remember exact question)

this question appears too:

Which two commands must you use to configure GRE tunnel with IPSec.
A. Ip unnumbered
B. Tunnel key
C. Ip tcp adjust-mss
D. Mpls mtu
E. Ip mtu

would you recommend to me suscribe digitaltut to try it again pass exam??
LABS OK, i need to know new questions

A router in an EVN environment is choosing a route. Which value is given the highest selection priority ?

A. IGP administrative distance of the route.
B. Replication status of the route
C. Vnet tag of the route
D. Default administrative distance of a route
E. Lexical value of the source VRF name

Well what do you think ? As for me I would suggest option A . It is not that because I like IGP much ,but according to Cisco – he or she says this is the order : This router will :

1.Prefer a route with better IGP administrative distance ..
2. Prefer a route with better default administrative distance …
3.Prefer a non replicated route over a replicated route
4. Prefer a replicated route with a better replicate distance
5. Prefer a replicated route with better lexical value of the source VRF name … This is the order

What do you think about this question?

Which statement about IP SLA feature is true?

A. It ensures that there are appropriate levels of service for network applications
B. It classifies various traffic types by examining information within Layers 3 through 7
C. It measures how the network treats traffic for specific applications by generating traffic that bears similar characteristics to application traffic.
D. It keeps track of the number of packets and bytes that are observed in each flow by storing information in a cache flow

In my dump, correct is A.

This question was in my exam today and i’m not sure if I replied it correct,
Thanks!

features enable a default gateway to inform it’s end devices when a better path to a destination is available.

which lan features enable a default gateway to inform it’s end devices when a better path to a destination is available…

which difference in the packet fragmentation feature between ipv4 and ipv6 devices is true.

which statement about the use of tunneling to migrate to ipv6 is true..

Who is taking the CCNP 300-115 next?

@rayista kindly send dumps on my email.
email: sysdigi001 @ gmail . com
thanks in advance.

Today, I passed my exam 300-101

Labs/Sims; PBR, OSPF, EIGRP OSPF REDISTRIBUTION

D&D: The same

Questions: Some news but the quesions in this database are enought

Thanks @digitaltut

watch out guys, Isabella is sending malware with her files from firefox!

virus total report with the 88kb file

368cd29eb4b78bb99903a528d53dbe1d4c13ab1c27593394798d83b98fc40c25
300-101__1___1___1___1___2_.pdf

anybody who is real here?
i am sure there are many fake people posting bulshit opinions

anybody who took the exam recently?
some people say the questions from digitaltut are enough to pass, some people say there are 5 new questions… some say there are a lot of new questions ~50% , who to believe?

for CCNA and SWITCH i was able to find good dumps for free, but I feel with ROUTE is different – I cant find dumps and I am not sure if digitaltut is valid

Somebody to help :|

@ccnp routing. the lab sim on the exam, is it the same as digitaltut lab sim? thanks

hi, which material they are referring to ” “New Updated Questions – Part 5″ ? thanks all

pls can someone tell me which dumps have the lab

Does anyone got the latest vce player. Please share if you have

“New Updated Questions – Part 5″ are visible only for premium members
I am still waiting for somebody with premium membership to confirm if it makes any difference or not, I have it but still dont know if thats enough to go on the exam or not. If there will be only 5-6 new questions I dont mind , but if there will be 50% new Q lets say (20 for example) I can pass maybe , but I dont think I will risk 300 USD just like that… its all about the money, I know all concepts, did a lot of labing etc etc , but Cisco are killing me with their stupid dry MCQ that there is no sense to know at all :@

oh i see, i think premium membership will be worth it, its very cheap only 26 USD for 2 months, it will not hurt to try. ill be subscribing too

Passed today!
Thank you digitaltut and to those who answers and share their experiences. Premium membership is worth it but you must study all the questions not just the MPQ and NUQ5. I also suggest to study old dumps, I used Dexter file.

Lab/Sim: PBR, OSPF EIGRP redistribute and OSPF eval

There are around 5 new questions that I never saw in digitaltut and dexter file including

What are two differences between SNMP traps and SNMP informs ( Choose Two)
A. Only Informs provide a confirmation of receipt
B. Traps are more reliable than Informs because they generate PDU s from the network Manager
C. Only Informs are discarded after delivery
D. Only traps are discarded after delivery
E. Informs are more reliable than Traps because they require TCP three-way handshake

A network engineer wants to notify a manager in the events that the IP SLA connection loss threshold reached. Which two feature are need to implements this functionality? (choose two)
A. MOS
B. Threshold action
C. Cisco IOS EEM
D. SNMP traps
E. logging local

Maybe this is a stupid question….
Do actual Cisco exams requires “copy run start” in labs??
In my yesterday exam, when I applied the command, prompt replied “Command not implemented”.
Thanks for advance

@Passed is a Fake!

@rayista

The command didn’t work during my exam too, but I still passed.
The most important thing is study very well. There are some questions during my exam that I have not seen before. Find time and go thru all the comments section here. Someone uploaded a URL for a dump that was very useful some weeks and before care of malicious links as well.
Some of the questions I remember.

a network engineer is migrating an ipv4 point-to-multipoint frame relay network to ipv6.which ipv6 address type must be used in a frame relay map configuration commands to ensure that the ipv6 protocol still work after migration…

by default what is the maximum number of equal metric path BGP uses for load balancing…

which type of traffic does DHCP snooping drop.

300-101 PASSED!!
Finally passed! 934/1000.

Most of the questions were the same from my first attempt and the sims were identical.

https://send.firefox.com/download/62a789363d543fa1/#2vptO0KGUhsRPK0XTDtsmA

Now on to the Switch and Tshoot!

Thanks for all the support!

Answer for this question?

What are two differences between SNMP traps and SNMP informs ( Choose Two)
A. Only Informs provide a confirmation of receipt
B. Traps are more reliable than Informs because they generate PDU s from the network Manager
C. Only Informs are discarded after delivery
D. Only traps are discarded after delivery
E. Informs are more reliable than Traps because they require TCP three-way handshake

@kobi

Good question as to who to believe here.

I am also studying and I want to do the exam in 2 months. Could you send your e-mail here to exchange real information?

By default, BGP chooses one best path among the possible equal-cost paths that are learned from one AS. However, you can change the maximum number of parallel equal-cost paths that are allowed

Pls can someone tell me what to expect with the lab/sim. And any pointers to study for. Thanks

@kobi & @Krad
Yesterday i was found a different dump but i’m not sure about this, is that dump is valid, if you want dump kindly send email on my mail address.
EMAIL: sysdigi001 @ gmail . com

I’ll feel very happy to help you :)

May be I’ll reply you late but I’ll reply you must.

Answer for this question?

What are two differences between SNMP traps and SNMP informs ( Choose Two)
A. Only Informs provide a confirmation of receipt
B. Traps are more reliable than Informs because they generate PDU s from the network Manager
C. Only Informs are discarded after delivery
D. Only traps are discarded after delivery
E. Informs are more reliable than Traps because they require TCP three-way handshake

@ Naomi

– I answered that question sometime ago ,just check previous pages here – but for you – the correct option is A and D. There is a reason for this -traps ,by their very nature just notify the manager , and are discarded ( hence confirmation of receipt) . Informs also notify the manager ,but they need to be acknowledged ,before being discarded. There is a nice reference on Cisco -see my earlier posts here on this specific question.

@ Naomi
– Just an error correction above. The suggested option is A and D. Traps just notify the manager -(or agent or whoever ) then are discarded. Informs also notify the manager ,but they provide a confirmation of receipt , (from the manager ) before being discarded.

Passed today 7xx
Digitaltut is hardly enough to pass
Alot of new questions are not in part 5

ROUTE (300-101) Passed on first try!
So for a very long time I’ve been saying to anyone thinking about going for CCNA that “nothing prepares you to pass a CCNA quite like failing a CCNA”. I took the composite test, and it was rough. After failing the first time though, I came back and passed as soon as I could. CCNP ROUTE looked like it would be the same, being a foot deep and a mile wide like CCNA was. Imagine my surprise when I got a passing score on the first go!

I pulled a lot of study material from this sub, so thanks to everyone who posted study guides and advice. I also used the OCG, FLG, Bryant books/videos, and the Cisco online course that is really great for the topics it does cover but doesn’t cover SO much of the actual exam material.

All the questions on the exam where from the following dump

http://www.filedropper.com/300-101

Emma’s dump is FAKE FAKE FAKE FAKE FAKE FAKE FAKE FAKE FAKE FAKE FAKE FAKEFAKEFAKE

DId you remember at least the topics?

@Emma can you provide me with the correct link please. The link is not working it goes to adverstisement link. I will give my money twice the price of Cisco exam. I will deposit money in your bank account.

@ZeRo (2) who copied my name xD

Unfortunately no, but i can say they might be from old topics, might even be from CCNA.
I would recommend also studying Dexter dump, I didn’t studying it, maybe that’s why i got a low score.

need valid dump,can any one help?