Share your ROUTE v2.0 Experience

Got my route today 872/1000.
EIGRP redistribution, OSPF sim, PBR,
ROUTE_Mar_2019.pdf is still valid but enough about 10 to 12 new question
i study ccnp routing for 6 moths and master all labs ,and study
https://www.mediafire.com/file/euf9l7emo7elhbb/ROUTE_Mar_2019.pdf
for 2 weeks and most of dextur file it was to much for i culd not completed all
D&D is the same as ROUTE_Mar_2019.pdf
and this what i remeber from the new question :
1-new question about configuring SSH (choose two)
a.) disable telnet
b.) Configure TACACS +
c.) Something about keys (this is obvious one of the correct answers)
d.) obvious not correct answer
2-new question abour ebgb adjacency fail
3-TTL is 0 what the router do about it
4-what nat type do overlap
5-what algrothm use by EIGRP to get best path
Most of the questions are here. I advise also to study 757 dextur file.
also TX for all how in this digitaltut.com site it’s by far the best community for study.regards

Got my route today. 87*/100
EIGRP redistribution, OSPF sim, PBR,
the router_march still valid but at lest 8 to 10 new qustions
1new question about configuring SSH (choose two)
a.) disable telnet
b.) Configure TACACS +
c.) Something about keys (this is obvious one of the correct answers)
d.) obvious not correct answer
2What will the router do when it receive packet with TTL 0?

Most of the questions are here. I advise also to study 757.

From where should I get 757?. if you have it, please send it. aquadig at yahoo dot com

@Aquadig
h tt ps://ww w .sc ribd .com/do cument/3995 44061/300-101-Dext er-p df
remove the spaces Good luck all

@ Saji
Thank you so much. Good explanation. Appreciated.

Thanks, Dark

What is the task you must perform when configuring SSH (Choose two)

a. Configure TACACS+
b. Configure hostname
c. Generate RSA key
d. Disable telnet

Ans are Generate RSA key and disabling telnet (trasport input ssh – accepting only ssh connections )

A network engineer executes sh ip flow cache command. Which two types of information are displayed in the output that is generated?
A. Top talkers
B. Flow export statistics
C.Flow sample for specific protocol
D.MLS flow traffic
E. IP Packet distribution

Ans is it C and E ? please correct me if i am wrong

Dear i passed the exam more than 10 question out of route march you need to study good and real all question befor enter

Any VCE questions, passed the switch exam, Looking for material to begin my studies. I have the
Cisco route book and I just put together my CCNP lab. 8 routers, 5 switches, 1 ASA and one terminal server 2610 to console to each device. Very cool.
Thanks

I failed the 300-101 on the 16th. I really do not know what when wrong, as I did the lab correctly.
The lab was Redistribution, PBR and OSPF. And there were new questions as stated above by other test takers in this forum. I am really sad. I studied the digitaltut Jan2019 questions.
Thank you guys anyways.

There are so many new questions that are not here. I believe that there needs to be an update.

Does anyone have the latest vce dumps?

Thank you

nebulus1967(at)gmail.com

@ DARK,

Congraats mate, do you perhaps have a VCE format ROUTE_Mar_2019.pdf

I have a exam in mid April. And can you share the new 10 to 12 Questions if you still remember.

Thanks,
John

Which type of address does OSPFv3 use to form neighbor adjacencies and to send LSAs?
A. unicast IPv6 addresses
B. link-local addresses
C. multicast address FF02::5
D. unicast IPv4 addresses
I am totally confused about the answer ?

@John_Snow_Winter is Coming, Hi, when the series is starting? Any idea?

Has anyone used the dumps from: ROUTE FAQs & Tips? If so, how accurate are they for the March-2019?

Hello everyone, Please if you have question 757, be kind enough and help send to exousiame at gmail dot com. thank you so much. I am starting to prepare for my exam and hopefully will be ready in 4-5 weeks.

have a nice day

@John_Snow_Winter is Coming
go to page 298 search for DARK March 16th, 2019
and read my first long comment it contain all the question that i face and i can remember.regards.

@Dark,

Thanks for your guidance you dont happen to have VCE formatted file for March 16th 2019 PDF ?

@KALO April 14, 2019 mate, but now less focus on CCNP route.

Thanks,
John Winter is Coming

Isabella, Maria and Ebrahem are spammers, they are trying to get you to pay for questions

may you send me the last valid dump {email not allowed}

@DARK,

I have the exam soon, tell me, ¿did you study with the Dexter file or the nnnneeeettttwwwwoooorrrrkkkiiiinnngggg file? Thanks in advance

Passed the exam today. Had 55 questions, around 5 that I hadn’t seen in any of the dumps. I am also a premium member on here. Reading dumps on here is enough to pass the exam.

Labs: Eigrp OSPF redistribute, PBR
DND: NAT, TACACS and I think one more which I can’t remember.
OSPF Evaluation

New Q’s I can remember:

BGP question asking why BGP isn’t working and what needs to change:
A – Change to ibgp
B – Change multihop to 1
Can’t remember other 2 answers.

A slightly reworded question on Hub and Spoke asking why the spokes can’t see eachothers loopbacks:
A – disable split-horizon on HUB
B – disable on spoke
(To my knowledge I didn’t see this worded like this in the dump however I could be wrong ;)

@Jay

gratz. which dumps did u study? is ROUTE_Mar_2019 enought?

thanks.

Hello everyone, Please if you have question 757, be kind enough and help send to exousiame at gmail dot com.

Can somebody send me the latest dump? nagylajoskiraly12345 at gmail dot com
Thanks

Does anyone have the VCE exam pro software?
Thank you

nebulus1967(at)gmail.com

@ Jay, Did all the Lab on Digitaltut came out in the exam. Can you remember how many drag n drop you had. Thanks

Please who can share with free valid dumps, really need it or who can share with the link where to buy this dumps my email : munalbai . azamat @ mail . ru thnx a lot

@Digitaltut
Please, do an update for most recently questions. I have an premium account but still need the most recent questions that are mentioned around for the next week exam.
thnx in advance

D&D question of Dexter dumps seems old..any idea

Does anyone have the VCE exam pro software?

Thank you very much

nebulus1967(at)gmail.com

Hello All,

I just passed my CCNP ROUTE (300-101) today. All the study material on this website is enough to crack it as long as you understand the concept and do not mug up the answers. If you understand the concept you should be able to answer the new questions as well in case there are any. Please do not waste time and money on unreliable dumps whatsoever, it’s not required.

I am a CCNP (R&S) now, thanks to this wonderful website.

Cheers,
Jesse

Hi Elsa,
https://en.wikipedia.org/wiki/Path_MTU_Discovery

Many network security devices block all ICMP messages for perceived security benefits,[6] including the errors that are necessary for the proper operation of PMTUD.
……
A workaround used by some routers is to change the maximum segment size (MSS) of all TCP connections passing through links with MTU lower than the Ethernet default of 1500. This is known as MSS clamping

So, “D” for your first question!!

Hi Elsa, this is for the 2nd question. Sorry for multiple reply.

I agree with you, answer A. However, I suppose same ICMP issue is considered with question 1 that ICMPs are blocked on the way routers. Therefore, it may not be perfect.

On the other hand, TTL is used as hop count in DDoS prevention algorithm. Each IP packet information is monitored and stored in a table at security device. Then the security device infers initial TTL value for the packets. The hop count of IP packet is calculated that final TTL – initial TTL and stored in the table. The security device watches the hop count if it is same as stored value for each arrival IP packet. If it is not same, the device recognizes the IP packet is DDoS packet.

@nicknameisgood
the route 300-101 dump is missing in this korean website. Can yiu share if you owe it
TIA

Hi everybody,
please be kind to contribute on new questions.
This going also to @Digitaltut

Can anyone share the VCE exam pro software please?

Thank you

nebulus1967(at)gmail.com

New Question:

What is the task you must perform when configuring SSH (Choose two)

a. Configure TACACS+
b. Configure hostname
c. Generate RSA key
d. Disable telnet

The answer should be B and D.

You dont need to disable Telnet to configure SSH, it will accept both SSH and Telnet connection by default.

https://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfssh.html#wp1005358

Prerequisites to Configuring SSH

Prior to configuring SSH, perform the following tasks:

•Configure a host name and host domain for your router.

•Generate an RSA key pair for your router, which automatically enables SSH.

correction, it should be B and C :

b. Configure hostname
c. Generate RSA key

@YScooty
That`s true. Do you remember any other new question man

@Kim,

no, my exam is in 24 hours from now.
Wish me luck :)

Goodluck, yScooty!

Some more info question I found online: (not too sure about answer, feel free to correct)

Which address is an IPv6 multicast addresses?
A. 2002 0 :0: 0 :0 :0 :0: 2
B. 00020 0 :0:0: 0:0:2
C. FF02:0:0 :0 :0:0 :0 :2
D. FE02 0:0 :0 :0 :0:0:2
Answer: C

A network engineer execute the show ip cache flow command. Which two types of information
are displayed in the report that is generated? (Choose two)

A. MLS flow traffic
B. flow samples for specific protocols
C. IP packets distribution flow expert statistic
D. top takers

Answer: B D

Which fallback method can you configure to allow all AAA authorization requests to be granted if
the other methods do not respond or return an error?
A. RADIUS
B. enable
C. TACACS+
D. none

Answer: D (none)

@Yscooty

All the best to you. Let us know your experience about the exam.

My exam is tomorrow, here are some of questions that you can expect on exam (source:forums):

Which option is invalid when configuring Unicast Reverse Path Forwarding?

A. allow self ping to router
B. allow default route
C. allow based on ACL match
D. ##source reachable via both##

Correct Answer: D
===========================================================
A network engineer wants an NTP clients to be able to update the local system without updating or
synchronizing with the remote system.
Which option for the ntp access-group command is needed to accomplish this?

A. ##serve##
B. query-only
C. serve-only
D. peer

Correct Answer: A
===========================================================
A network engineer configures two connected routers to run OSPF in Area 0; however, the routers fail to
establish adjacency. Which option is one of the caused for this issue?

A. Area numbers match.
B. OSPF process numbers do not match on both neighbor routers.
C. The Same MTU sizes are configured on both sides.
D. ##The Same OSPF router IDs are configured on both routers.##

Correct Answer: D
===========================================================
Which two commands do you need to implement on the CALLING router to support the PPPoE client? (choose
Two)
A. peer default ip address pool
B. ##mtu##
C. bba-group pppoe
D. pppoe enable group
E. ##pppoe-client dialer-pool-number##

Correct Answer: BE
===========================================================
Which interface type does a PPPoE client use to establish a session?

A. Physical
B. loopback
C. visual-template
D. ##dialer##

Correct Answer: D
===========================================================
A network engineer executes the command show ip eigrp vrf purple topology. Which type of information is displayed as a result?

A. routes for a global routing table.
B. updates that were sent for a specific routing table.
C. active neighbors for a global routing table.
D. ##route successors for a specific routing table##

Correct Answer: D
===========================================================
A network engineer trying to synchronize the time clock but the time is not working. (the idea is somewhat like that)

A. Either a firewall between the two routers or an ACL on the router is blocking IP protocol number 123.
B. ##Either a firewall between the two routers or an ACL on the router is blocking UDP 123.##
C. Either a firewall between the two routers or an ACL on the router is blocking TCP 123.
D. Either a firewall between the two routers or an ACL on the router is blocking IP protocol number 123.

Correct Answer: B
===========================================================
Which values identifies VPNs in an EVN environment?

A. DLCI
B. route target
C. ##virtual network tag##
D. VLAN ID

Correct Answer: C
===========================================================
What is the task you must perform when configuring SSH (Choose two)

a. Configure TACACS+
b. ##Configure hostname##
c. ##Generate RSA key##
d. Disable telnet

Correct Answer: BC

@yScooty and @Atlantis
good luck both of u. hope you can pass. we’re waiting news from you