Share your ROUTE v2.0 Experience

goo . gl /
xM51jZ

Please do no put SWITCH questions in this ROUTE website!

@Anonymous

Do u have brains in your head, if so use it, check the url and post questions,
this is the secon time u r doing this,

any leads on new question today

Aoove link is fake ie ,, — Anonymous

Guys any update
any new questions,
Guys u passed today please have curtesy to update your experience here,
it may help a lot like you

Above link is FAKE 300-101 Passed

FAKE FAKE FAKE

Route-jan – > question 151 variance value A. 1 B. 2 C. 3 D.4.
mentioned answer was C.
But variance value should be 4. because Feasible successor’s metric < successor's metric * variance.
notice formula that < but not <=. so metric 150*3 = 450 which is incorrect. it should be 150*4= 600 which is higher than successor's metric (150).
any concern?

Hi guys passed now with 801 marks, FRESH POST
Cant rely on digitaltut much, many unknown MCQ came,
One on BGP peers, one on NHRP, one on URPF, many on evn technology, beware on them.
For me Sims were Eigrp stub same,
Eigrp Evaluation same
OSPF : need to configure /30 same concept but IP change,
My suggestion keep alternative dumps along with digitaltut, Alone cant help to pass
As a premium member not satisfied much,

Dear digitaltut,
I suggest you to post new updated questions when they are changed,

Today i got many questions which i dint saw here,

Thanks

Going to CCNP Switch in 2 months,

Lisaa is Fake,

Above link is fake
FAKE FAKE FAKE,

Hi All,

Passed the other day all lab’s are the same, and all questions came from this site. Just pay for the membership and learn all questions on here like NUQ’s, MPQ’s etc… There were only 2 new questions on the exam 1= vrf purple can’t remember the the question but there is a post on here about it, other was D&D about FR point to point, also on here in question section although DT need to amend it as it says choose answer 12345 but no options. Guys you don’t need any dumps just this site😁
Big thanks to digital tut and now to last exam tshoot good luck all

Route-jan -> question 114
which bgp option is required when load sharing over multiple equal parallel from a single CE …….?
Answer is it eBGP multipath or eBGP multihop.
answer should be maximum-path not multipath.
or multihop? since they are directly connected there is no need for multihop command

Yesterday I failed with score 7XX. few of new questions. Some new questions are mentioned.
Please try to give the correct answers.
1. What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast ?
a) It provides reliable TCP transport
b) It enables multiple servers to send video streams simultaneously
c) It enables multiple clients to send video stream simultaneously
d) It supports distributed applications
e) It enables multiple clients to receive the video stream simultaneously

2. Which two statements about PAP authentication in a PPP environment are true ?

a) It is performed at the beginning of the session only
b) It sends the password in clear text
c) It uses a username with an MD5 password to authenticate
d) It hashes the password before sending it
e) It is performed at the beginning of the session and is repeated periodically for as long as the session is maintained

3. Which two tasks should you perform to begin troubleshooting a network problem ?
a) Gather all the facts
b) Define the problem as a set of symptoms and causes
c) Implement an action plan
d) Moniter and verify the resolution
e) Analyse the results
4. Which two piece of information can you learn by viewing the routing table ?
a) Whether an ACL was applied inbound or outbound to an interface
b) Whether the administrative distance was manually or dynamically configured
c) Which neighbour adjacencies are established
d) The EIGRP or BGP autonomous system
e) The length of time that a route has been known
Q. 5 Which two facts must you take into account when you deploy PPPoE ?
a) DDR idle timers must be configured to support VPDN loggin.
b) PPPoE supports a maximum of 10 clients per customer premises equipment
c) DDR is not supported
d) You must manually configure IP addresses on the PPPoE interface
e) An individual PVC can support one PPPoE client
Best of luck

Above link came from me I have been reading posts on here since Nov last year, tried the dumps and there are too may inconsistencies, my study approach was INE, cisco press books, constant lab work on gns3 and this site.. Learn all questions on this site and know the concept of why the question is right / wrong then you should be good to pass.

I’ll check back if anyone has a question good luck!

Sorry post with smiley face on p291😁

pls share on j 4 j a i s @ h o t m a i l . c o m
remove spaces

Please try to give the correct answers.
1. What are two reasons to use multicast to deliver video traffic, instead of unicast or broadcast ?
a) It provides reliable TCP transport
b) It enables multiple servers to send video streams simultaneously
c) It enables multiple clients to send video stream simultaneously
d) It supports distributed applications
e) It enables multiple clients to receive the video stream simultaneously

Answer is (d) and (e) – that is the advantage of using Multicast, a video server can reduce load and conserve bandwidth by sending to many receiving clients at once. Key here is 1(Server) to Many (Clients). I believe distributed applications here means you can choose which clients receive the video stream which is another feature of Multicast

2. Which two statements about PAP authentication in a PPP environment are true ?

a) It is performed at the beginning of the session only
b) It sends the password in clear text
c) It uses a username with an MD5 password to authenticate
d) It hashes the password before sending it
e) It is performed at the beginning of the session and is repeated periodically for as long as the session is maintained

Answers are
b – sent in clear text
e – PAP starts after the PPP link is established and is repeated throughout the session until its terminated (After PPP link is established should be when a session starts?…)

Give it up man, you must have posted this like a 1000 times!

Ignore “Passedd” link up there, it is FAKE FAKE FAKE!!!

can some1 share the jan 19 dump. much appreciate
smartask_luv at yahoo.com

Anyone needs the latest updated dump (Route_Jan_2019) click on ‘ROUTE FAQs & Tips’, scroll down to the section just before the comments, click on the link to the route-question-and-answers and then download from the mediafire link.

Please try to give the correct answers.

3. Which two tasks should you perform to begin troubleshooting a network problem ?
a) Gather all the facts
b) Define the problem as a set of symptoms and causes
c) Implement an action plan
d) Moniter and verify the resolution
e) Analyse the results

4. Which two piece of information can you learn by viewing the routing table ?
a) Whether an ACL was applied inbound or outbound to an interface
b) Whether the administrative distance was manually or dynamically configured
c) Which neighbour adjacencies are established
d) The EIGRP or BGP autonomous system
e) The length of time that a route has been known

5 Which two facts must you take into account when you deploy PPPoE ?
a) DDR idle timers must be configured to support VPDN loggin.
b) PPPoE supports a maximum of 10 clients per customer premises equipment
c) DDR is not supported
d) You must manually configure IP addresses on the PPPoE interface
e) An individual PVC can support one PPPoE client

@ CiscoMan

Thanks the giving the correct answers of both 1 and 2.
Please give the rest 3. Thank you

3. Which two tasks should you perform to begin troubleshooting a network problem ?
a) Gather all the facts
b) Define the problem as a set of symptoms and causes
c) Implement an action plan
d) Moniter and verify the resolution
e) Analyse the results

Ans. b) and c) as per me

4. Which two piece of information can you learn by viewing the routing table ?
a) Whether an ACL was applied inbound or outbound to an interface
b) Whether the administrative distance was manually or dynamically configured
c) Which neighbour adjacencies are established
d) The EIGRP or BGP autonomous system
e) The length of time that a route has been known

c and e

Please try to give the correct answers.

3. Which two tasks should you perform to begin troubleshooting a network problem ?
a) Gather all the facts
b) Define the problem as a set of symptoms and causes
c) Implement an action plan
d) Moniter and verify the resolution
e) Analyse the results

Answer = (B) then (A)
http://www.ciscopress.com/articles/article.asp?p=2273070

4. Which two piece of information can you learn by viewing the routing table ?
a) Whether an ACL was applied inbound or outbound to an interface
b) Whether the administrative distance was manually or dynamically configured
c) Which neighbour adjacencies are established
d) The EIGRP or BGP autonomous system
e) The length of time that a route has been known

Answer- E, B (This is because you should already know what the default AD values are, anything different means it was manually configured)

5 Which two facts must you take into account when you deploy PPPoE ?
a) DDR idle timers must be configured to support VPDN loggin.
b) PPPoE supports a maximum of 10 clients per customer premises equipment
c) DDR is not supported
d) You must manually configure IP addresses on the PPPoE interface
e) An individual PVC can support one PPPoE client

Answer – B – yes PPPoE CPE can support a max of 10 clients
The second fact is tricky
A is wrong because you dont need DDR idle timers to support VPDN
C – Not sure – Before 12.2(13)T, PPPoE “client” did not support DDR, It DOES NOW
D – Wrong – You do not need to manually configure an IP address. You can use “ip address pppoe” or “ip address negotiated”

I guess that would leave (E) as the correct option. Actually for PPPoE over ATM, a PVC can support only one PPPoE client.

@Sashi86

C would be wrong because you can form a neighbor adjacency and not exchange any routes with that neighbor. eg. No routes to exchange, Stub receive-only, distribute-lists, etc

need dump ccnp route plzz

3. Which two tasks should you perform to begin troubleshooting a network problem ?
a) Gather all the facts
b) Define the problem as a set of symptoms and causes
c) Implement an action plan
d) Moniter and verify the resolution
e) Analyse the results

Answer are a and b

This is a URL h t tp s : / / g o o . g l / p cL6WL

I hope to help you with the CCIE exam, this is a URL h t tp s : / / g o o . g l / p cL6WL

Today I have passed the Route exam. I had taken preparation last 6 months. but last 2 weeks only study digitaltut premium. I got some new questions but digitaltut Lab, new QA part 5 and most popular ques are enough to pass the exam.
Lab: EIGRP stub, Eigrp ospf redistribute
EV: OSPF simulator, Drag and drop. Thanks Digitaltut and all of you.

Hi Rose, Congratulations on passing the exam.
what is the QA part 5?

@TakingExamSoon the QA part 5 is the NUQ part 5 i.e. New Updated Questions part 5 if you pay for membership study all questions on this site and you will pass… have faith in yourself

Oh Thanks, I think i will do that now, I downloaded the Jan_2019 file and assumed all the questions were on there?

@TakingExamSoon part 5 new question digitaltut premium

Beware allot of new questions! and labs have different ip’s.

Does Jan_2019 file contain the new NUG part 5?

@saji no

Is there any chance to get NUG part 5 ? Is the Jan_2019 file still valid ?

@speed premium membership only

what is the main diffrence between premium membership and Jan_2019 ?

Is Route Jan 2019 still valid?

Please share the latest dumps as I have exam on 28th feb to manu2488.@.g.m.a.i.l.c.o.m

please share the latest dumps kringmef @ g.m.ai.l..com

s h a n 4 5 4 6 @ g m a i l . com

can anyone sen dthe dump please??

dumps are not valid +15 new questions for sure. Lab eigrp stub changed its says ping from r2 to r3. my friend did the summary on r3 but ping failed.

I got the new 458q.vce (100+ new questions and Jan2019) but I can’t view all questions as I don’t have the full version of vce player. Is there someone know a legit vce to pdf converter? I will take the exam on Monday. Badly needed your reply. Thanks

please share the latest dumps networkankara1453 @ g.m.ai.l..com

please share latest dump lnsameerafernando[at]g.m.a.i.l..com , is digitaltut dump still valid ?