Share your ROUTE v2.0 Experience

Hello Everyone.
Question: Is there a VCE file for the latest set of test questions JAN -.pdf ?
Also, If I study the labs and the latest January questions is that enough to pass?

Thanks for your input.

@faty

according to RFC 792

Destination Unreachable Message

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| unused |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Internet Header + 64 bits of Original Data Datagram |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

It means that ICMP unreachable packet includes a portion of the original data

@Storm,congrats mate!
Same as my exam result and experience, you copied my message :)
See you on switch exam, when do you plan to take?

take care.

Thanks passerby for your help :)

guys,

can anyone please tell me what does logging console 7 means?

does it increases CPU utilization? or they are viewd on only active console ports?

Logging console 7 activates debug messages to get logged. This causes high court utilization in production environment.

@Anonymous just remember the rule: almost all eigrp commands include AS number and then – other values
so, exclude ipv6 commands, exclude eigrp command containing percentage before AS number, and you will have only one option:
ip bandwidth-percent eigrp 55 80

@Hammy yes correct answer is C.

Hi to all,

I passed the exam yesterday with 9xx score.

LAB were exacly as per digitatltut: IPv6 OSPF Virtual Link Sim + EIGRP Stub Sim + EIGRP Evaluation Sim – I had no exception and all labs wer getting the expected results, without specific modifications.

Drag & Drop as per digitaltut:
Drag and drop the steps in the NAT process for IPv4-initiated packets
Drag and drop the statements from the left onto the correct IPv6 router security features on the right.
rag and drop the IPv6 NAT characteristic from the left to the matching IPv6 NAT category on the right.

The majority of questions were on JAN_2019 file, but I had 3 questions never seen before.

I remember one was about migrating an IS-IS network to lower Administrative Distance protocols (choose two), options were EIGRP, RIP, OSPF, UDP, External BGP, Internal BGP…

Everything you need is on Digitaltut, and my suggestion is to go for the membership subscription as it was really worth.

Thanks to all contributors of this forum, and thans to Difgitaltut.

Good luck to everyone !

Vincent, please can you share the Jan 2019 dumps to this ID:
Ch u yo ung 1 99 2 at hot mail . com
Please please please.
(Remove spaces and correct at as symbol).
Thank you!

HI, where can I buy latest valid dump please ?

I just passed the exam. There was some new question in the exam but other all was from this site.
most popular question and from new update question.
lab eigrp evaluation
eigrp stub
ospf
dnd from this site
thanks, digital tut

hi please share with me the ccnp dump 757 q at
{email not allowed}
very apprciate
delete _

hi please share with me the ccnp dump 757 q at
kheireddine . mamine @ outlook . com
very apprciate
delete space

the dumps 757q 1 and 227q, i would be most grateful
gaza59 @ hotmail . com
please renove the spaces

please send me the dumps 757q 1 and 227q, i would be most grateful
gaza59 @ hotmail . com
please renove the spaces

Where can a person get New ROUTE Questions – Part 5?

Thanks to everyone.

Kindly send JAN_2019 file on this email.
sysdigi001 @ gmail . com
thanks

Thank you “Latest dump”, passed too using the same dump you posted

Do you have dump for ccnp switch ?

I’ve got the drag and drops, sims, and multiple choice from the December_2018 studied. Does this seem like it’ll be enough to pass? Should I also study the 757q pdf or is the December_2018 enough? I just want to make sure I’m fully prepared for this.

HI Where can i find JAN 2019 PDF
please share the link,

If anyone needs the latest updated dump (Route_Jan_2019) click on ‘ROUTE FAQs & Tips’, scroll down to the section just before the comments, click on the link to the route-question-and-answers and then download from the mediafire link.

Passed three days ago with 8xx.

LABS and simlets: EIGRP STUB, EIGRP OSPF Redisribution (witch only 1 serial), and OSPF EVAL

I see about 7-8 new questions. One of them asked about a incorrect relationship with 2 routers OSPF and the possible Answers was:

-something about diferent area
-something about diferent process number
-same rotuer ID on both switches –> i Think that was correct
-another one i dont remember

The other quetions was from MPQ and NUQ.

Be carefull witch this question of OSPF EVAL:

Question 2
Check the serial links connected to R3. Which statements are correct?

A. The neighbor command must be used on R1-R3 link to keep the adjacency up
B. The OSPF timer values of R2-R3 link are 30, 120, 120
C. The OSPF timer values of R1-R3 link should be 10,40,40
D. R3 must flood LSUs to all the routers on the network.

In my exam the correct answer was A!! in the picture you can see R3 S1/1 –> R1, and R3 S1/0 –> R2, but if i do a show cdp neig on R3, you can see that the real interfaces used are inverted.

Good luck to everyone.

@bardok, if interfaces were point-to-point? If they were, what neighbor command are you talking about?

@Andrew are you sure about this?

@Andrew, I mean are you sure that the media fire link has the latest jan2019 questions. I cannot verify because there order of questions is completely changed in the link you mentioned.
Also do you know when it

Guys what is the 757q dump and where do I find it ?

910/1000. Few new questions. One of them was like “what is show vrf purple eigrp topology showing”. Another was “why is ospf adjacency not forming for two neighbors with same area”. Another one was dhcp for ipv6. Besides these, Most of them were from “most questions” and “new questions “. Eigrp lab and distribution lab. Ospf composite questions.

Hey Anonymous, which dump did you study for an exam ?

@Andrew thanks you so much :)

Passed today with 850! All you need is digital TUT – download the Jan exam 90% covered.

Lab – Stub, ipv6 virtual link and Eigrp evaluation.

Where is the January file located?

Hello all, would you please share me newly dump Routing CCNP. Thanks for your help.

Hi @Anonymous!
So according to you Jan 19 dumps are enough?
Also can you share a little more about your experience, please please please.
If anyone can share their experience it will be of great help.
Thank you.

Cleared route exam today..only 4 questions out of the dumps here..labs are all gud..thanks digitaltut

which is valid Dumps Please share the link for Jan2019 dumps

I pay for the premium membership, here to tell you that’s all you need. I just passed and everything on test except for two questions. Labs and D&D were 100% tracking with here. Questions except for like two were based on here. I can’t recall the two questions. Just study the
popular questions section and al the labs.. That’s all you need. Thank you digitut…..
On to troubleshooting… final exam!

I googles what I thought one of the questions was found it on a website:
It may have been this exact question was based on a “show vrf” command…
A network engineer executes the command show ip eigrp vrf purple topology. Which type of information is displayed as a result?

A. routes for a global routing table.

B. updates that were sent for a specific routing table.

C. active neighbors for a global routing table.

D. route successors for a specific routing table.

Answer: D

https://bbs.hh010.com/forum.php?mod=viewthread&tid=562444&extra=page%3D1%26filter%3Dtypeid%26typeid%3D76

new questions already have, but i cannot download, please can u download and share link?

changed_questions –> its CCNA questions, please don’t spam on topics for CCNP route

any info today?

Do not use link above, Emma is fake, fake!!!

sombody could sharme the 757 dump?

{email not allowed}

Pls anyone can share the valid community dump for route?

Hi CCNP Route,

Any-takers recently, especial yesterday and today please share if JAN 2019 PDF is still valid enough?

I have an exam on 15th Feb 2019 (Friday)

Thanks,
John

Can someone share the link for Jan 2019 PDF file again please?
I have read the previous pages from this forum and I am also a premium member but I can not find the link to that file.
Please advise where to get it!

need dump

Pass the exam
The dump is valid , dont worry just read the dumps (227q , route-jan or route-dec , also you can check the 757q )

Good luck for all

Dumps valid
Eigrp sim (traffic sharing), virtual link, eigrp stub
D&D – Dmvpn, ipv4 to ipv6 translation, strict loose
Jan19. Verify as some answers are wrong.
Just study hard.

Is there any wrong answers in the Route_Jan_2019.pdf ?
what is 757q? is that what u mean by nnneeetttwwooorrrkkkiiinnnggg?