Share your ROUTE v2.0 Experience

Dear all Digitaltut fellow mates,

Took the exam today and scored 97X. Wow, what an exam!

I prepared using CBT Nuggets videos and refered the Cisco Official guide whenever required.

I used this website for brushing up my preparations and test my knowledge.

My suggestion in addition to the “Most popular questions” and “New Updated Questions – Part 5” available with the premium membership:
– Please go through all the chapters/sections in this website.
– Read and understand the explanations for each every questions and answer. Cisco has increased the standards of the examination by regularly revising their question bank.
You cannot pass the exam anymore with just memorizing the questions.
– In today’s exam 70% of the questions were from the “Most popular questions” and “New Updated Questions – Part 5”; however most of them have been reworded/rephrased in such a way that you can confidently answer it only if you understand the concepts.
– Another 30% questions were from the other sections under “ROUTE 300-101” heading.
– Labs EIGRP STUB, OSPF redistribution, and EIGRP Evaluation sim.

Please prepare well with ALL the questions in this site! All the very best to all of you!
Thanks @Camp and Digitaltut!

Please send to me

Alisaadd1990@Gmail .com

Dump 300-101
227q pleassssse

Hi Guys,

Passed exam today with 94x score.
Most of the questions (90%) were from “Most popular questions” and “New Updated Questions – Part 5”

– Labs EIGRP STUB (summarization work only for /16 network), OSPF IPV6 Virtual Link and EIGRP Evaluation sim.

It preferable to read cisco cert guide, watch CBT nuggets and have practice with EVE-NG or GNS3, then buy premium on digitaltut to go through dumps.

Please send…. ernest.eet @ gmail dot com

@JJ congrats
If you have spoto 248q and 300-101 V23.75.pdf
pls send to me
n.sniper01 at gmail dot com

@JJ

Hi bro can you please send the latest dump to dhanaraj.tamilarasu at gmail dot com

@JJ Thanks.

@Kani can you please share the dumps to my email. dhanaraj.tamilarasu at gmail dot com

@JJ Please send me the spoto 248 Q to dhanaraj.tamilarasu at gmail dot com

Someone may share last dumps SPOTO 248Q and 300-101 V23.75.pdf
Please send emadccnp @ to gmail dot com
Thank you all

@JJ
thanks ;)

@JJ send me materials to triplecapacity @ gmail dot com

@JJ could you plz send me the new dump PLZ PLZ PLZ ): mo . ismail . it @ gmail . com

@JJ could you plz send me the new dump PLZ PLZ PLZ ):

mo . ismail . it @ gmail . com

hello plz send me new spoto dump

ccnp1987 @ gmail . com

@jj kindly send me latest dump
ccnp1987 @ gmail . com

I am planning to avail the premium membership here. May I know what files or dumps am I going to get for premium membership?

Thanks in advance.

take care there is so many wrong answers in 300-101 V23.75 dumps a lot wrong answers also some drag and drop miss-match.

use the notepad text that contain correction answers and take care to use that notepad for correction questions deeply.

QUESTION 553
In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State

A OR B >????
I don’t understand Q

Down: No information has been received on the segment.

Init: The interface has detected a Hello packet coming from a neighbor, but bidirectional communication has not yet been established.

2-Way: There is bidirectional communication with a neighbor. The router has seen itself in the Hello packets coming from a neighbor. At the end of this stage, the DR and BDR election would have been done if necessary. When routers are in the 2-Way state, they must decide whether to proceed in building an adjacency. The decision is based on whether one of the routers is a DR or BDR or the link is a point-to-point or a virtual link.

ExStart: Routers are trying to establish the initial sequence number that is going to be used in the information exchange packets. The sequence number ensures that routers always get the most recent information. One router will become the master and the other will become the slave. The primary router will poll the secondary for information.

Exchange: Routers will describe their entire LSDB by sending database description (DBD) packets. A DBD includes information about the LSA entry header that appears in the router’s LSDB. The entries can be about a link or about a network. Each LSA entry header includes information about the link-state type, the address of the advertising router, the link’s cost, and the sequence number. The router uses the sequence number to determine the “newness” of the received link-state information.

Loading: In this state, routers are finalizing the information exchange. Routers have built a link-state request list and a link-state retransmission list. Any information that looks incomplete or outdated will be put on the request list. Any update that is sent will be put on the retransmission list until it gets acknowledged.

Full: In this state, adjacency is complete. The neighboring routers are fully adjacent. Adjacent routers will have similar LSDBs.

@JJ and others
what is the difference between 300-101-V23.75 AND 9TUT most popular questions/and PART-5
Does anyone have SPOTO 248Q If yes, pls send to MMMEXPERT at yahoo dot com

If you have spoto 248q pls send to me
mss279970 @ gmail. com

passed, was close to 790 tho, But a pass is a pass.
Some new questions about BGP and uRPF had not seen (sorry can’t remember them). But yes Dig Tut is enough to get you through.

Sims 2, Eigrp Stub, OSPF.
Eigrp, and D&Ds Copp & NAT64 stateful and stateless among them.

I did exam today and I passed it with 8xx

Labs: EIGRP & OSPF redistribute, EIGRP stub, and OSPF Simlt
D&D : FR, IPv6, and there is 3 new

it was 53 question at all

@jj please share the latest dumps to ccnaccnpccie2017 @ gmail .com

Hello team
Passed today 9xx
all questions are in the mpq except a question
Otherwise in labs I got Eigrp stub / ipv6 ipv6 virutal link / eigrp sim /
If i have Time i will tag you all question in mpq
See u all for the tshoot

Hello to all of the community,
Exist a VCE File for the revised Spoto Dump or the December PDF that anonymous posted
some pages before? If so please let us know and please share it.
Thank you

@Suckmygbick

can you please share the valid dump to mohamed dot rezeka at gmail dot com

passed today with 87x.
Few new questions. Redistribution lab, EIGRP stub sim and OSPF evaluation.

@an3

Congratulation please share the latest valid dump to mohamed dot rezeka at gmail dot com

Here all tag question on MPQ december

5,7,15, 22
29
31
45
57
102
132
176
201
208
224
225
228
229
235
238
239
240
241
245
new question 4,8,9,14,15,16,26,28,30,32,33,34,37,39

@suckmygbic

can you please share the valid dump to mohamedrezeka at gmail dot com

@an3

Congratulation please share the latest valid dump to mohamedrezeka at gmail dot com

@suck plz I need the last dump I have Nneettwwooeekking November dump only

@all

So, my turn

I passed today with 94x points

D&D dmvpn, urfc , nat staleless .

labs OSPF virtual (some problems in virtualization), EIGRP STUB, EIGRP Evaluation

And my advice for people, study official cert guide and take be a member digitaltut ;)

Thank you everyone for help ;)

Now i put vodka and beer to fridge :D

@JJ congrats
If you have spoto 248q and 300-101 V23.75.pdf
pls send to me
n.sniper01 at gmail dot com

@Congratulation please share the latest valid dump to mohamedrezeka at gmail dot com

@Lechu Congratulation please share the latest valid dump to mohamedrezeka at gmail dot com

@Anonymous you are fake

Hi everyone.
just wanted to tell you BIG THANKS to everyone int this site. Except the ones who try to sell something on the posts. No matter real or fake!
Passed 300-101 2 days ago. All questions were here.
Labs 1:1 with this one. Also D&D questions.
Payed for a month and well worth it.
Wish you all the best and happy routing.

Just took my exam and passed.. trust me spoto and digital tut “Route-dec 2018” is spot on..

QUESTION 664
Which value determines the amnount of traffic that a network path can hold in transit?
A. route cache setting
B. maxsimum windows size
C. badwidth delay product
D. MSS

For me correct is C

QUESTION 665
Which location within the network is preferred when using a dedicated route for Cisco IP SLA operations?
A. user edge
B. provider edge
C. access edge
D. distribution edge

B

If you got some dumps for pay PL, AD it’s never mind, you must verify the answers, because is a lot mistakes. If you prepare only from dump you fail the exam.

which are valid dumps and from where we can get the LABs is it on the digital tut ? Please guide Thanks

@Shahjahan pay for the premium membership and you’ll have access to labs and all required questions.

Hi,

May I have the copy of Latest Spoto and Route-dec 2018. Please.
Thank you in advance.

agarciaccna @ gmail . com

I will take the exam in a couple of hours…. Will let you know the outcome…

Hi everbody, i passed exam just, all networktut last update question is valid, no new questions. Thanks everybody.