Share your ROUTE v2.0 Experience
Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
@ginmco
The dump you sent me are not valid. I suggest studying SPOTO227 (link has been provided few pages back) and the dump from @Config Tee – this dump has about 60% wrong answers. RouteRider has corrected the wrong answers – and then both dumps are very similar.
@ Kaktus @Rutrider @ Config Tee
can you please re-share the @Config Tee or Spoto Dumps updated with the correct answers
thank you
I am taking an exam in few hours. I will let you know the details.
Here is the link to SPOTO227:
https: // ufile . io /fcq7e
The file has some corrections.
Q3/227
When unicast Reverse Path forwarding is confugired on an interface, which action does the interface take first when it receives a packet ?
A – it verifies that the source has valid VEF ajency
B – it checks the egress access list
C – it verifies a reverse path via the FIB to the source
D – it checks the ingress access lists
In dump is C, but should be D
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/sec-data-urpf-xe-3s-book/cfg-unicast-rpf.html
@kaktus
the above link is not working.
plz send a valid link.
@sam
Delete spaces. I tried this link and it worked.
@Lechu
But the question does not stay that there is an ACL configured…
Just passed the 300-175 exam today
i just wanted to go to the website
Exact2pass.com/300-175-pass.html
Thanks Exact2pass.com for offering the valid 300-175 dumps collection, it helped me a lot!!! Thanks again
@Lechu
configure terminal
ip flow-export destination 192.168.10.1 9991
ip floq-export version 9
A – Specify a different TCP Port
B – Specify a different UDP port
C – Specify a VRF
D – Configure a version 5 flow-export to the same destination
E – Specify a different flow ID
Answer is B
https: // http://www.cisco. com /c/en/us/td/docs/ios/12_0s/feature/guide/12s_mdnf. html
—————————–
If u know the right definition for the Route Target & Route distinguisher, No need to wory about getting mixing up the VRF-lite implementation & purpose of the Route target.
——————————————–
C. A router advertises routes back out the interface on which it learned them with an infinite metric.
this is called route poisoning
—————————————————-
Q:Features of Netflow version 9? (CHOOSE TWO)
A. Cisco proprietary
B. IEEE standard
C. IETF
D. ingress/egress
E. ingress
F. egress
Answers are A&C
https :// http://www.cisco. com /c/en/us/products/ios-nx-os-software/netflow-version-9/index. html
Thanks @Jonty
I have just failed the 300-101 paper, scored 778!!! Ther ar sooo many new qtns!
Which two protocols can cause TCP starvation? (Choose two)
A. TFTP
B. SNMP
C. SMTP
D. HTTPS
E. FTP
What is the correct answer? A and B or A and C.
Please provide the reason if you are aware of.
can someone post the correct dump 300-101 paper? Please.
It has been corrected but many people fail the exam
@Nbi
So many new questions compare to what? SPOTO, Digitaltut…?
What dumps have you used to prepare?
@TW
A and B
For TCP starvation you need UDP and TCP without QoS…
TFTP and SNMP using UDP! all others above SMTP, HTTPS, FTP using TCP
guys please I need links for route dump plz I must do the exam this month. which page number have the right link or if someone can send it directly the links plz. asfore21 at hot mail dot com
mention my name izymoe to the above comment plz thx
@TW
It’s A & B because they use UDP.
Which two statements about DMVPN are true? (Choose two)
A. IPsec encryption not supported with statically addressed spokes
B. It requires full-mesh connectivity on the network
C. It uses NHRP to create a mapping database of spoke addresses
D. Multicast traffic is not supported
E. It supports dynamic addresses for spokes in a hub-and-spoke VPN topology
what is correct answer A,C or C,E ?
I need the dump plz guys
@JJ
IPsec is supported
@Lechu
pjsousa say C,E but routerride say A,C …
And digitaltut say A,C!!
JJ
IPsec is supported because I configured this solution at some clients, dynamic address for spokes is supported too ;)
@ Anonymous, many thanks !!
JUST PASSED EXAM , PLEASE SHARE CORRECT LINK TO THE DUMP
Passed guys, very close call though.
DDs and Labs all same.
Multiple choice questions are the most challenging, still found new questions and slightly twisted ones from dumps. about 30% of MCQ are not in 227.
I barely made it
congrats mancert!
Can u provide more details about new questions? taking the exam tomorrow..
@JJ
NP
Which dumps are you using ?
@ Lechu
I use PassLeader, spoto 227, 195, 300-101 V23.75 & Most Popular Questions…
too much ….
If you suspensed
another question
Which security feature can protect DMVPN tunnels ?
A IPsec
B TACACS+
C RTBH
D Radius
Correct answer is A ;)
OK, so I passed exam now (not a perfect score). Recently I reviewed mostly 227q from SPOTO and there were about 60-80% from spoto. One D&D was from old neettwworrking dump file (NPTv6/NAT64,well-known) and second D&D was stateless/statefull.
Labs were the same but in EIGRP STUB lab I could not get the same results as in digitaltut so I left it.
So my advice -> study 227q + 757q file and you will be fine!
OK, I passed the exam as well.
Spoto227q has a lot of covered questions but there were some from old dumps as well (mainly 757q).
Passed the exam today. CCNPRoute / comment on 274 was good.
Spoto and nneettwwoorrkkiinng dumps was used for preparation.
I have my CCNP now… the Routing was the last, which I have done today with 9xx.
There are NO new questions, if you have used the digitaltut MPQ and SPOTO to prepare. Dont worry you will be just fine! I have paid for the digitaltut premium but it was worth every penny.
Labs:
EIGRP Stub (At R4 as some extra I had to delete reconfigure the EIGRP to make it work.)
EIGRP OSPF Red. v2
D&D:
Statefull and Stateless (3-3)
point to point Frame Relay config
NAT64, NPTv6, Well know prefix, NAT64 prefix to pair
Guys forget buying dumps… just pay here for the premium and be active in the forum, SPOTO is also a good start, about 80% from the question were from there… The other 20% I have met in digitaltut MPQ.
Thank for everybody here in the forum who were here to correct the dumps, and big thanks for digitaltut!!!
I am going to check the forum for a couple of days to help you out but forget to ask for the dump per e-mail… read back in forum… there is everything here.
@Kaktus @Camp
Is enough for spot and Digitaltut please give brief detail for the exam how many new questions.
and share if memorize new Q
Thanks,
@ pjsousa
My memory isnt that great especially under pressure. its hard for me to remember.
i did 757, 195 and 227 MCQ but there were still questions i was unfamiliar with.
the labs helped me out a lot
@Kani
As I have said I went through the whole digitaltut question and prepared from the MPQ from the site and from the SPOTO dump.
I had 0 new questions… I have seen them all, there was no surprise. :)
@Camp
Thanks for your information I understand well bro in digitaltut did you study most popular questions or all category ROUTE 300-101. in eigrp ospf redistribution did you face problem.
Thanks.
I cant answer… why?
@Kani
Nope, only from the other LAB.
@Kani
As SIM I had the OSPF.
I have went through in the whole website twice to understand the concepts.
I have learned the MPQ and the 5th update + SPOTO. IT IS ENOUGH!
@Kani
As SIM I had the OSPF.
I have went through in the whole website twice to understand the concepts. But to know the MPQ is really important.
Passed today. Got EIGRP stub, IPV6 OSPF, EIGRP sim. From DnD got NIV, uRPF (loose/strict mode), RADIUS/TACACS+.
The digitaltut premium version was really useful. Most of the questions were from the sections ‘Most Popular questions’ and ‘New Updated Questions – Part 5’.
@Camp
Thanks i get the point write your mail i catch you to ask swift Q
Hi guys.
I passed yesterday with 8xx/1000.
DD – Frame Relay and ACL Definitions
Labs – EIGRP-OSPF Redistribution, OSPF evaluation, OSPF SIM
Thanks for everyone. @kaktus @pjsouza @RouteRider @DJ Config Tee
NETWORKING, SPOTO and the new .pdf 300-101 V23.75 is valid enough
I did not see any new questions.
I see you guys in T-SHOOT
@zoto please can u write me?
Are u from Azerbaijan?
my email is
yamenmehdizade @ gmail . com
@Router Learning please share the new .pdf 300-101 V23.75 with me triplecapacity @ g m a i l . c o m
@Capacity if share you share me also abdikanipd at gmail dot com