Share your ROUTE v2.0 Experience

All questions seems to be from the file Config Tee has posted recently (of course the original file has a lot of wrong answers but RouteRider corrected most of them).

@Kaktus, please can u write me mail?

pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaase what is the correct answer for this one
Which statement about the IP SLA feature is true?

A. It ensures that there are appropriate levels of service for network applications
B. It classifies various traffic types by examining information within Layers 3 trough 7.
C. It measures how the network treats traffic for specific applications by generating traffic that bears similar characteristics to application traffic
D. It keeps track of the number of packets and bytes that are observed in each flow by storing information in a cache flow

@ali
C

Can someone please help with the correct answers for these questions?

Which statement about spilt-horizon rule for distance vector routing protocols is true?
A. A router advertises a route to an unreachable network with an infinite metric.
B. A router does not advertise routes to any neighboring router.
C. A router advertises routes back out the interface on which it learned them with an infinite metric.
D. A router does not advertise routes back out the interface on which it learned them.

What is the correct answer A or D?

I remember D is a split-horizon rule. Not sure about A.
——————————————————————————————
Which two causes of latency are true? (choose two)
A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilization of a link

Answer: C and D or C and E?

pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaase
Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key rollover to work correctly?

A. SMTP
B. SNMP
C. Passwords
D. Time

Answer: D

why the answer is d
it should be c

@ali
Good response is D
passwords have to match but you have to know that this part concerns the KEY-CHAIN part, and we call this part KEY-STRING.

But if timers are not OK, hellos messages can be a problem.

So the time is an issue for authentication fiel in EIGRP world

thank you @kaktus

Question 161
Which value determines the amount of traffic that a network path can hold in transit?
A. route cache setting
B. maximum window size
C. bandwidth delay product
D. MSS
why the naswer is c
it shold be d

Please whoever has the current dump post the link here . I have my exam in January . thanx

2nd try

Can someone please help with the correct answers for these questions?

Which statement about spilt-horizon rule for distance vector routing protocols is true?
A. A router advertises a route to an unreachable network with an infinite metric.
B. A router does not advertise routes to any neighboring router.
C. A router advertises routes back out the interface on which it learned them with an infinite metric.
D. A router does not advertise routes back out the interface on which it learned them.

What is the correct answer A or D?

I remember D is a split-horizon rule. Not sure about A.
——————————————————————————————
Which two causes of latency are true? (choose two)
A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilization of a link

Answer: C and D or C and E?

@CCNP

Split horizon – D

Latecy – C D

Here my feedback regarding the 250Q circulating around..i mostly agree with RouteRider

——————– CONFIG TREE FEEDBACK ———————

No3 A
No5 Missing a valid answer – multicast address FF02
No6 B
No9 C
No12 B – Provider Edge
No14 A B
No15 B
No16 A D
No28 B – Active/Active Firewall Setup
No35 A D
No40 A
No45 B
No51 A C
No53 B – Contains the 2 correct answers
No54 A (Serve and not Server!!)
No57 C D
No60 A
No62 A C
No65 D
No66 B
No67 A
No72 A?
No78 C
No85 A E (NHRP!)
No102 D
No104 C – Tricky. Stateless “almost” does not need additional conf. Even though, i would choose C.
No106 B
No115 C
No121 D
No125 C
No139 B
No140 D
No145 D E
No146 A E
No149 @no bgp default ipv4-unicast@
No152 D
No155 B D
No160 B
No161 C E
No167 A is not table, it is total
No171 C
No175 C
No178 A D
No180 D E –
No181 D
No185 A – show crypto ipsec sa
No189 B
No190 D
No197 C
No203 B C
No208 B C – IP Packet distribution
No213 C
No214 C D
No215 C is correct, it is not authEn, but it is authPriv
No216 A (MSS)
No221 C E
No223 C
No230 C
No232 C F
No233 B
No235 D
No237 A E
No239 A
No240 B
No248 D

@Rif

Thanks a lot.

I passed 922. Check the last updates of the questions before take the exam. Tha really helps!! Compare answers and verify are correct. Some mismatched question answers between most popular questions and the updated ones.

@Anonymous
Did you use any dumps that have been posted here? Especially SPOTO 227?

Hi,

Somebody explain me why the correct answer is C and not A?

NO.42 Which two statements about Frame Relay point-point connections are true?
A. They can operate normally without a DLCI map.
B. The device can establish a pout to-point connection to the cloud without a DLCI.
C. They use two DLCIs to communicate with multiple endpoints over the Frame Relay cloud.
D. Changing a point-to-port subinterface to a different type requires the device to be reloaded.
E. Each physical interface that extends to the Frame Relay cloud can support a SVC.
Answer: C D

Thanks!!!

And this one, please…

NO.53 Which two statements about AAA with the local database are true?(Choose two)
A. The local database can serve only as a backup authentication method
B. It supports a limited number of usemames and passwords Accounting is not supported locally
C. By default, it is queried before a TACACS+ or RADIUS server
D. Authorization is available only for one-time -use logins
Answer: B C

This Question is tricky, the FEASIBLE CONDITION does not exist:
You want router R1 to perform unequal-cost routing to the 192.168.10.0/24 network. What is the
smallest EIGRP variance value that you can configure on R1 to achieve this result?
A. 1
B. 2
C. 3
D. 4
Answer: A(no effect, its impossible load balance without feasible condition exists)

anyone knows or confirm if the dumps/study guide from Actualtest are still Valid? I know in the past they remove all study guides but i check today and I see couple including the 300-101 with a date of Nov 27 2018 with 189 questions.

I can share if anyone want to take a look

@ginmco
Then share it. We can easly confirm if they are valid or not.

Give me your email and I will attach, you can pass it along to other if you want to.

@Kaktus….im new to this group….trying to get familiar…Give me your email and I will send it

@Kaktus

Yes, i studied hard all this questions. Specially the new updated ones. They are valid! Check always before take the exam, and read the comments here. People give good reviews!

Hello, i passed today with over 900, the SPOTO/195q dumps are spoto-n ;) all questions were in the latest dumps i dont think i got any questions from the July PDF. Labs were the same though, got NVI, MP-FR and DHCPv6 D&Ds, same labs as were on here. and one question i don’t recall seeing about autocommands on login to the CLI. HTH you guys rock! cheers

also got DMVPN compoents D&D as well as IPv6 Traffic filter/access-class D&D – all in Spoto, that should be enough TBH, unless you get unlucky.

NO.181 A network engineer is configuring two dedicated internet connection within the internet
nodule.
One connection is primary connection to all wired business communication. While the other is the
primary connection for all customer wireless traffic?
A. PBR
B. IP QoS
C. MMC
D. IP SLA
E. IP SAA
Answer: A

Same question in digitaltut:
A netwoik engineer is configuring two dedicated Internet connections within the Internet module One connection is the primary connection to all wired business communications while Che other is the primary connection for all customer wireless traffic If one of the links goes down, the affected traffic needs to be redirected to the redundant link Winch current technology should be deployed to monitor the scenario?

A. IP SLA
B. MMC
C. IP SAA
D. PBR
E. IP QoS

Answer: A

And thats why I dont realy get the PBR

@Aria is trying to sell a dump!!!

2nd try

Can someone please help with the correct answers for these questions?

Which statement about spilt-horizon rule for distance vector routing protocols is true?
A. A router advertises a route to an unreachable network with an infinite metric.
B. A router does not advertise routes to any neighboring router.
C. A router advertises routes back out the interface on which it learned them with an infinite metric.
D. A router does not advertise routes back out the interface on which it learned them.

What is the correct answer A or D?

I remember D is a split-horizon rule. Not sure about A.
——————————————————————————————
Which two causes of latency are true? (choose two)
A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilization of a link

Answer: C and D or C and E?

@pjsousa

NO.197 Which value determines the amount of traffic that a network path can hold in transit?
A. route cache setting
B. maximum window size
C. bandwidth delay product
D. MSS
Answer: D

I found same question in nneettwwpprrkkiinngg-V2.1 and Passleader dump.

In there, the correct answer is “d”.

In nneettwwpprrkkiinngg-V2.1

NO.197 Which value determines the amount of traffic that a network path can hold in transit?
A. route cache setting
B. maximum window size
C. bandwidth delay product
D. MSS
Answer: D

QUESTION 664
Which value determines the amnount of traffic that a network path can hold in transit?

A. route cache setting
B. maxsimum windows size
C. badwidth delay product
D. MSS

Correct Answer: D
Section: Networking – Valid-September
Explanation

NO.5 Which type of address does OSPFv3 uses to form neighbor adjancises and to send LSAs?
A. unicast ipv6 addresses
B. link-local addresses
C. unicast IPv4 addresses
D. multicast address FF02::5
Answer: D

QUESTION 217
Consider this scenario.
TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result when the relay
agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
Correct Answer: AD
Section: Networking – Questions DAY-3
Explanation
refer to below:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/15-s/dhcp-15-s-book/ip6-dhcp-bl-query.html

But passleader say A,E !!

But *pass*leader say as AE!!

Hi. Plz help me to share valid dump to email. Thank you so much
My email: quyetpv144 @ gmail .com

NO.28 In which scenario can asymmetric routing occur?
A. active/standby firewall setup
B. active/active firewall setup
C. redundant routers running VRRP
D. single path in
Answer: B

* VRRP works Active/Standby instead Active/Active.
http://blog.router-switch.com/2012/12/what-the-main-difference-between-hsrp-vrrp-and-glbp-protocols/

@JJ

Q 217 which part i don’t see that Q

in nneettwwpprrkkiinngg-V2.1 called as 757Q

Finally digitaltut updates the MCQs. Those who have written exam confirm if these are the questions in current exam

@JJ

Q 217 A and D right i agree absolutely

But i thank Q 217 A and C .

DHCPv6 prefix delegation operates as follows:

1. A delegating router (Server) is provided with IPv6 prefixes to be delegated to requesting routers.
2. A requesting router (Client) requests one or more prefixes from the delegating router.
3. The delegating router (Server) chooses prefixes for delegation, and responds with prefixes to the requesting router (Client).
4. The requesting router (Client) is then responsible for the delegated prefixes.
5. The final address allocation mechanism in the local network can be performed with SLAAC or stateful/stateless DHCPv6, based on the customer preference. At this step the key thing is the IPv6 prefix and not how it is delivered to end systems.

https://thenetworkway.wordpress.com/2015/06/23/ipv6-prefix-delegation-what-is-it-and-how-does-it-going-to-help-openstack/

The DHCPv6 use UDP protocol for distribution IPv6 addresses and prefixes. The routers dont need in the DHCPv6 prefixes from DHCPv6 server, its work for network administrator. DHCPv6 messages are exchanged over UDP port 546 and 547. Clients listen for DHCP messages on UDP port 546 while servers and relay agents listen for DHCP messages on UDP port 547.

@ Kani
I agree your mention but if dhcpv6 only use udp 547, the answer “A” is incorrect because the router can obtain DHCPv6 prefixes.
How do you think about this issue.

@ginmco
My mail is jan . kaktus at onet . pl

The question is clearly defined as ” DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation”.

A network administrator is attempting to configure IP SLA to allow one time stamp to be logged when a packet arrives on the interface and one time stamp to be logged when a packet leaves the interface. Which IP SLA accuracy tool enables this functionality?

A. Trap
B. RTT
C. Responder
D. Trigger
E. Logging

Answer: B or C?

@CCNP B. The accuracy of the RP-FP synchronization is poor. To address this issue, the enhanced UDP jitter probe in the QFP Time Stamping feature stores both the RP and CPP time stamps. RTT and jitter calculations utilize the CPP time stamps, and one-way calculations continue to be based on RP time stamping. Therefore, time synchronization, such as that provided by NTP, is required between the source and the target device in order to provide accurate one-way delay (latency) measurements. One-way latency values are computed using RP time stamps are corrected by applying estimated-correction algorithms based on CPP time stamps.
QFP time stamping includes an enhanced UDP probe and enhanced responder. The devices on which the UDP probe and IP SLAs responder are configured must both be running Cisco software images that support QFP time stamping and the optimized time stamp location (for more accurate RTT measurements). If the UDP jitter operation is targeted to an responder on a device that does not support the optimized time stamp location, the IP SLAs probe will fail.

C. is just a responder same as a sender.