Share your ROUTE v2.0 Experience

Please confirm the answer ?

Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.

I don’t have 757Q and i search more so help me my time save

share on abdiqanipd @ gmail com

thanks all

Please share a link of 227 and 757.. Anyone please help..

Omg you people are lazy. Its all one page back

Dear Please find the below link for SPOTO 227 &195+November Q Dumps .VCE
if there is any changes in the answers please inform :
https:// we .tl/t- gKSIvVKFxT
VCE FILE please check and confirm right answers! Dont wait for others to clean your A**s and go study for once!

you are assholes, everyone who passes the exam, all genes, who shoot random dumps

https://dropmefiles.com/3auh1

pls check, who pass

@kamati

Congratulation

Please tel us the new question if you remember.

@RouteRider

Congratulation

@RouteRider

Congratulation too

@RouteRider

Congratulation Bro

@kamati

Your vce file containt correct and checked answers ?

@ Jules Winnfield kindly inform me what is this dump
and is it valid??

People, I passed the exam 9++, networking dump its still a good source, Good luck and thanks digitaltuts.
There are some new questions but if you study, it should not be a big deal.

hello guys ,
I have tomorrow the Exam.
Can somebody please send me the pool?
Thanks
hamid _ 6543 at yahoo . com

rompecollas be more specific please, networking 195q or 757q?

Hello Guys, please send me the updated dump my exam after a week!!
mohamed rezeka @ gm ail . com remove spaces plz

@RompeCollas congratulations!!!

can you share the latest dump plz

mohamed rezeka @ gm ail . com remove spaces plz

I passed the exam today. Barely passed.
D&D: https: //www. cisco.com /c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfacct. html#wp1000903

All other D& Ds are from the dumps.

Lab: EIGRP Stub. OSFP Stub. Just like the digital tut but with iPs and some other parameters changed.
Sim: EIGRP evaluation as seen in Digitaltut.
Most of the questions are from the 227 and 195q dumps. Also use the digital tut dumps PDF.
There are a few new questions that you need to think carefully.

Study the dumps but make sure you understand the questions as they are reworded or answers are modified.

@Bobster

If you talking about dumps 227 or 195 you have this with correct answers ?

@Bobster
Did you have auth-proxy in the new D&D?

Hey,

could someone confirm one thing for me?
Question:

Which access list is used to filter upper layer protocol
a) Standard
b) Extended
c) Dynamic
d) Time Based
e) Reflexive

My opinion is that it should be e) Reflexive
In all dumps i saw they are stating it’s Extended ACL but when you look at this:
https://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_acl/configuration/15-1s/sec-access-list-ov.html

Reflexive Access Lists
Reflexive access lists provide filtering on upper-layer IP protocol sessions. They contain temporary entries that are automatically created when a new IP session begins. They are nested within extended, named IP access lists that are applied to an interface. Reflexive access lists are typically configured on border routers, which pass traffic between an internal and external network. These are often firewall routers. Reflexive access lists do not end with an implicit deny statement because they are nested within an access list and the subsequent statements need to be examined.

@Lechu, I used the dump that was posted here….. if you go back to the previous comments you will find the corrected answers.

@RouteRider, i think I had the auth-proxy. I can’t remember the details on it.

@Bobster
I had it too, and the right side was rephrase totally against the d&d which was in dumps

@Bobster @RouteRider
What do you mean by “auth-proxy”?
https://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfacct.html you mean this D&D with Network/EXEC/Commands? And that the answers were different?

@bobs

can I contact you by mail to ask you some questions? thanks

Dump 757 vaild ?

Dump 757 valid ?

@Kaktus, the link you posted was on the exam. It was a drag and drop question. Network, Commands, Connection, System and Resource.

Auth-proxy were somewhere else. I cant remember.

I Passed the exam!!!

Same LABs and SIMs

I studied the “most popular questions” from digitaltut Premium Member Area. The money is worth it!

I also studied the following dumps:
– Spoto 227 (uploaded by RouteRider)

Many thanks to digialtut, RouteRider, MultipleChoice and nneettwwoorrkkiinngg !!!!!!

Edit:

I also used the nneettwwoorrkkiinngg dumps of course!

@Bobster
I can remember this, auth-proxy was this D&D!!!
I think they changed the system to auth-proxy.

@kaktus
Auth-proxy:
The Cisco IOS Firewall authentication proxy feature allows network administrators to apply specific security policies on a per-user basis. Previously, user identity and related authorized access were associated with a user IP address, or a single security policy had to be applied to an entire user group or subnetwork. Now, users can be identified and authorized on the basis of their per-user policy. Tailoring of access privileges on an individual basis is possible, as opposed to applying a general policy across multiple users.

With the authentication proxy feature, users can log in to the network or access the Internet via HTTP, and their specific access profiles are automatically retrieved and applied from a CiscoSecure ACS, or other RADIUS, or TACACS+ authentication server. The user profiles are active only when there is active traffic from the authenticated users.

https: // www .cisco .com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00804c3d75.html#wp1000871
Unfortunately I don’t remember what was the text of correct pair for auth-proxy…
Probably it was: allows network administrators to apply specific security policies on a per-user basis. It’s not sure. Other pairs were changed totally on the right side.

@RouteRider Can you send me a updated duimps with correct answers ?

lechu21 @ wp .pl
This is the same versian which Kamati generate a vce file ?

@Jules Winnfield
It’s an old dump. There aren’t in the new questions, and some questions were rephrased or changed. And there are a lot of mistakes.
Nobody uses it!
NNEETTWWOORRKKIINNGG Q757 and SPOTO Q227 are better.

I remembered another changed question.
The original question was:
Where the output will be shown of the command debug condition interface fa0/1?
A. it will show on interface f0/1
B. it will show on interface f0/0
C. both interfaces will show debugging output
D. an interface cannot be used as condition

And the new:
Where the output will be shown of the command debug condition interface fa0/1 and debug condition interface fa0/0?
A. it will show on interface f0/1
B. it will show on interface f0/0
C. all interfaces will show debugging output
D. an interface cannot be used as condition
E. It will show on interface f0/0 and interface f0/1
F. It will not show anything

(perhaps with other words, but the meaning is same)

I don’t have vce file about it.
PDF was upload and posted on 12.01

Can you share A Valid Dump Please i will enter at 24 December
i had DUmp nneettwwoorrkkiinngg_v2.1 (09.09.2018)
is this a A Valid One ?

I Passed today 9xx!!

Same LABs and SIMs from this page.

There are a lot of questions related to PPPoE, DMVPN, OSPF LSA; but in my exam I notice some changes to several questions to those topics, hard to understand if you don’t read “ROUTE Knowledge Category”.

I read the “most popular questions” from digitaltut Premium Member Area. –> very useful

I also read the dump: ..Spoto 227

I would say that it is IMPOSSIBLE to pass the exam just by studying the certification guide (the book is missing too much information), so please take time your time to read dump and most popular questions.

Good luck!!!

@albert

I studied official cert guide two times and it’s not enough ?.

Where is “most popular questions” ?

@RouteRider @Kamati

Congratulation friends, and thanks for your help.

Someone can share most popular questions?
I would be thank

@albert

do you can remember what questions of Spoto227 came?

@ RouteRider and @ KaKtus can you please share the spoto 227 dumps with me. I have been working and studying at the same time for more than a month and I just want to pass this exam just as I did with my CCNA. Please any help from you guys will be appreciated. Do you also think a premium membership really worth it as some claimed?

You can download “most popular questions” below address

http://www.mediafire.com/file/6w5z3r9vv4j2rii/ROUTE_July_2018.pdf

Barely passed today guys, scored 82X/1000 pass 790 with 53 question . May be only like 20 to 30 % questions from the dumps. Simulations same from this site. Very tricky questions, I am glad had read the book entirely. Memorizing dumps would not help. Not at all satisfied by myself.

@Karma

You are right: the test has been updated. Do you remember any new “concepts”?

I will sit down tomorrow to remember some new one’s. EIGRP evaluation sim in this website where you are asked to find the Advertise distance for a specific route . Commands ” show ip eigrp topology” or ” show ip eigrp AS# topology” both were disabled. Basically what I did is that looked up the Route where it was learned from which neighbour and noted the FD of the Route. Went to the specific neighbouring router and typed show ip route for the specific route again and thats how I found the Advertised Distance for the Route.

I just passed the exam…227 spoto seem valid.. good luck!

@pegasusxl
When you purchase premium member access…
I saw this section and there is nothing new.
The new section contains only six question which is all in Q227 dump too.