Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
QUESTION 475
I agree with francuss. And A is definetely not correct because it says “Area ID match”…not “Area ID mismatch”.
@francuss, have u had time to review my Q227 inputs? (261 page).
@pjsousa
I only nave time to review these questions:
64/227
78/100
90/227
128/227
10/227
28/100
40/100
@zero zero, i went through the exam last week as well, too many new multiple choice questions. We had a lot of conflicting answers also, I am re doing it in two weeks I need to make sure i have correct dumps.I checked out pass4sure, they are saying that they have not had any fails or complaints. do you think they really have them?
@mancert
Did you study only dumps or theory too?
SPOTO Q227
5/27
A. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 deny tcp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
interface VLAN303
ip address 10.9.5.3 255.255.255.0
ip-access-group 102 in
B. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 deny udp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
interface VLAN303
ip address 10.9.5.3 255.255.255.0
ip-access-group 102 out
C. time-range SATSUN periodic Saturday Sunday 1:00 to 11:59
access-list 102 deny tcp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
interface VLAN303
ip address 10.9.5.3 255.255.255.0
ip-access-group 102 in
D. time-range SATSUN absolute Saturday Sunday 1:00 to 2359
access-list 102 deny tcp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
interface VLAN303
ip address 10.9.5.3 255.255.255.0
ip-access-group 102 in
Which is the correct answer? A or B (C and D is excluded)
A direction is in, but the traffic is outbound, but may be we have to apply this configuration the closest to the users PC on the router.
B has udl access-list, and it doesn’t filter HTTP traffic.
@RouteRider
Access group should be “in” and both TCP so only A fits to that.
Please share new 227 questions pgnebolsin @ gmail .com
thanks!
Share reviews On 300-101 exam http://certifychat.com/threads/300-101-dumps-pdf-cisco-ccnp-routing-and-switching-exam.16017/ Good Luck
@Kaktus Could you please share the NEW dump with me?
My exam is scheduled to 12/dec
Thanks
Hi Patrick Gost, I would be appriciate that you send the new dumps to the barisozensel @ gmail . com or please share how to reach this dump.
Regards.
how do convert pdf with jpeg to vce
3/227
3/227
I have seen a lot of answers but it is “B”!
There is a cisco link as reference.
When a packet is received at the interface where Unicast RPF and ACLs have been configured, the following actions occur:
Step 1: Input ACLs configured on the inbound interface are checked.
Step 2: Unicast RPF checks to see if the packet has arrived on the best return path to the source, which it does by doing a reverse lookup in the FIB table.
Step 3: CEF table (FIB) lookup is carried out for packet forwarding.
Step 4: Output ACLs are checked on the outbound interface.
Step 5: The packet is forwarded.
Reference: http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.html
@RouteRider
The question says block web trafic so anyway :
A : tcp trafic
B : udp trafic
so web trafic is a tcp protocol.
A is correct answer
JUST 20 $, TO GUARANTEE your Success.
CCNA R&S
200-125 CCNA = 565 Q&As DUMPs + LABs
100-105 ICND1 = 347 Q&As DUMPs + LABs
200-105 ICND2 = 268 Q&As DUMPs + LABs
CCNP R&S
300-101 ROUTE = 768 Q&As DUMPS + LABs
300-115 SWITCH = 287 Q&As DUMPs + LABs
300-135 TSHOOT = 180 Q&As DUMPs + Tickets
CCIE R&S
400-101 WRITTEN = 114 Q&As DUMPS
Get at BELOW Link:
Remove SPACES:
go o . g l /FkMoqt
@RouteRider
Could you help me and share me new dump?
my email: robrexal @ gmail .com
Which dumps are stable can anyone guide pls
@Francuss I studied and went through 757 twice
Hello guys please send me here the questions too.
Thank youu.
anbyth13 @ gmail .com
guys who studied from spoto dumps get any result ? i heard it was also unstable
if someone pass with dumps kindly help and support others atleast advise them which was stable
@RouteRider
Could you help me and share me new dump?
my email: yerardux @ hotmail .com
REgards
@ yerardux – i got it , but need to convert it to vce – it contains jpegs – any ideas
I wrote last week Kindly share the 227 files with me, I could possibly confirm new questions
b r i g h t o n m w a b a b at g mail . com
@mancert, please check your mailbox
guys kindly share latest dumps, sysdigi001 @ gmail . com
@Anonymous kindly send dumps on this email: sysdigi001 @ gmail . com
plz
will go through it and see what i can remember
pls share 227 dumps file at
z a s a d z x @ g m a i l . c o m
Thanks in advance
@Camp
The question does not states any configured ACL… so answer might be D. It verifies a reverse path via the FIB to the source… if there is an ACL configured then B is absolutely correct.
@mancert
pls share 227 dumps file at
z a s a d z x @ g m a i l . c o m
Thanks in advance
remove space
@Anonymous
pls share 227 dumps file at
z a s a d z x @ g m a i l . c o m
Thanks in advance
remove space
Any stable dumps yet?
Which two statements about DMVPN are true? (Choose two)
A. IPsec encryption not supported with statically addressed spokes
B. It requires full-mesh connectivity on the network
C. It uses NHRP to create a mapping database of spoke addresses
D. Multicast traffic is not supported
E. It supports dynamic addresses for spokes in a hub-and-spoke VPN topology
C and E???
please can you share 227 dumps to ccnprs @ protonmail . com
hello please send me the 227 questions here too
anbyth13 @ gmail .com
@ RouteRider
SPOTO Q227
5/27
A. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 deny tcp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
interface VLAN303
ip address 10.9.5.3 255.255.255.0
ip-access-group 102 in
B. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 deny udp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
interface VLAN303
ip address 10.9.5.3 255.255.255.0
ip-access-group 102 out
C. time-range SATSUN periodic Saturday Sunday 1:00 to 11:59
access-list 102 deny tcp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
interface VLAN303
ip address 10.9.5.3 255.255.255.0
ip-access-group 102 in
D. time-range SATSUN absolute Saturday Sunday 1:00 to 2359
access-list 102 deny tcp any any eq 80 time-range SATSUN
access-list 102 deny tcp any any eq 443 time-range SATSUN
interface VLAN303
ip address 10.9.5.3 255.255.255.0
ip-access-group 102 in
I Believe Option B is correct because there is no Permit statement in the ACL and there is explicit Deny at the end will deny everything.
hello please send me the 227 questions here too
anbyth13 @ gmail . com
@Karma
Other people say the A is correct because the right place is the closest to source for an extended ACL.
So we have to place the ACL to the interface which points to the users.
@Karma @RouteRider
But http is not udp/80….. it is tcp/80
Any one can confirm the dump or not
@Yoshimitsu I tell him , http is tcp port , it’s a logical question.
the question no specified a streaming trafic but only tcp trafic , so A is correct
By seeing your last comment :
@Maya @ All who contribute in spoto dumps come on guys please share your exam experience here if we study 227 , we can pass or not.
Can you please updated what going in your group , how many guys passed the exam who contribute for spoto dumps,
which DND and labs are in exam, how many of them passed up to now
please send me the 227 question mss279970 @ gmail .com
@ASAD check your Inbox.
Hi all, So I have the 757q dumps and the VCE converted file to go with it, and I have it in PDF format also. I’ll share willingly. Anyone want to share the the new q’s? 227 I believe.
There seems to be only a few on here doing most of the work RouteRider for one. Big up to you for your great efforts.
my email is……….. h a r d c i s c o @ gm ail . com
Lets share the love, we’re all trying for the same goal.
Good luck to all of you.
@Balha
here is the question:
“Which configuration can you apply to a device so that it always blocks outbound web traffic on Saturdays and Sundays between the hours of 1:00 AM and 11:59 PM?”
It’s web traffic!!! http and https, which are TCP 80 and TCP 443
whats the answer @routerrider an others if you know– A or D?
when unicast reverse path fowrding is configured on an interface, which action does te interface take first when it recieves its packet
a. it verifies the source has a valid cef adjacency
b. it checks the ingress access lists
c. it checks the rgress access lists
d. it verifies a reverse path via the FIB to the source
when unicast reverse path fowrding is configured on an interface, which action does the interface take first when it recieves its packet
a. it verifies the source has a valid cef adjacency
b. it checks the ingress access lists
c. it checks the egress access lists
d. it verifies a reverse path via the FIB to the source
by the way…. I’m not a scammer or looking for any money at all.
Let me know if you guys need the dumps I have.
God speed All!