Share your ROUTE v2.0 Experience

@Klueliss @Klueliss
Netwooooo dumps and the question here are enough to pass the exam. But first you must study.
You can not ask where you need to configure rip or ripv6 in a router. Not knowing this means not having studied anything. So what is the sense of certifying yourself?
It is true that CISCO asks absurd questions, but most are feasible if you study.

@francussss
Which one you are referring. Are you part of that group.
How you can say someone are not getting required info as you have no idea about the situation. Already send messages to that guy and he was not able to provide any evidence.
@Routerride
We have removed our orignal groip as peoples are trying to spam . We will share everything once we have all required info. We are here to help each other.

Which statement is correct regarding the operation of NAT-PT between the IPv4 and IPv6 networks shown?

A. The router will determine the IPv4 destination address.
B. The source IPv6 host can use DNS to determine the IPv6-to-lPv4 address mapping.
C. The host is statically configured with the IPv6-to-lPv4 address mapping.
D. ICMP can be used to determine the IPv6-to-lPv4 address mapping.

Is it A or B ????

@Maya
I’m not part of the group. I only say that those who paid should receive the dumps now and not in 1 week or when it is good for you. I have read about people complaining because they have not received the file yet.

@Yoshimitsu
Which statement is correct regarding the operation of NAT-PT between the IPv4 and IPv6 networks shown?

I think A because DNs it’s used only if you want communicate with a host by your name (not IP)

@to all

% Interface GigabitEthernet2 IPv4 disabled and address(es) removed due to enabling VRF CUST-X

% Interface GigabitEthernet2 IPv6 disabled and address(es) removed due to enabling VRF CUST-X

it’s a new question. I thin the reponse it’s add ipv4/ipv6 address

@francussss
Something like?
https : // learningnetwork . cisco . com/docs/DOC-27402

@RouteRider

exactly. Do not choose “… disable VRF CUST_A” it’s wrong.

Router, do you are in the group of Maya? Do you recive the new dump?

@francussss
This message come up when you try to add an interface which has already IPv4 and IPv4 address in same time to an existing multiVRF. After this message you have to add again the IPv4 and IPv6 address to the interface.

@francussss
No, i asked her (or him?) to add me to this group, but it didn’t happen.
Unfortunately, I don’t have any new dump…
AI try to hunt some information from this webpage.

@RouteRider

I did not have this question in my exam, a friend who gave the exam told me (he only remember a wrong answer “disabilite vfr cust-a). Then the answer will be: change / add ipv4 / 6

Are you in the MAya’s group? Did you receive the last dumps?

@francussss
i am not in the group…

@RouteRider
Perfect, do not waste money. Netwww dumps and digitaltut are sufficient for pass the exam if you studied. When do you have the exam?

good luck and see you on switch (or maybe you already have the 300-115 certification?)

@francussss
At the beginning of December
I have CCNP Switching

@RouteRider
I have to start studying it now, and I do not have much time with the family. I will spend about 6 months. I want to do all the laboratories with GNS3

Good luck

Hi Guys!
Guys, I want to take the exam of CCNP 300-101. I was visited this blog lots of time and every time I got more tension when I saw people said lots of new questions, I’m studying CCNP from a long time but I’m worried about to lose my money. Kindly guys guide me PLz.
@RouteRider
@Francussss
@Allguys

@All, Could you please answer this question

Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol

I think the right answer shoud be C service DHCP

A * ip helper-address is in interface configuration mode ( not correct)
D * not correct

@Maya

i think almost 40 to 50 people request to you for adding in the group and you still not gather money to buy dumps .

@ahmed, why r u depending on someone else, u can create a group and gather the money.

In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State

Really confused on this… A, B, or D??????

Can we please get an answer to this question,

newbiehero November 25th, 2018
QUESTION 602
Which two statements are true about EVN? (Choose Two)
A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic
C. It can support up to 16 VNs
D. It uses rdistribution to share routers between VNs
E. It supports SSM only.

Answer: AB or AD

https://packetpushers.net/howdy-mr-neighbor-router-ospf-adjacency-vs-neighborship/

Yoshimitsu November 25th, 2018
In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State

Really confused on this… A, B, or D??????

its B

@mancert it is AD

Audi Fan November 25th, 2018
@All, Could you please answer this question

Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol

Anonymous November 25th, 2018

should be B Im assuming

Yoshimitsu November 25th, 2018
@mancert it is AD

mancert November 25th,

Thanks Yosh

@mancert it should be D. ip forward-protocol

@Yoshimitsu
B

@mancert @Yoshimitsu
In my opinion: C. service DHCP

oh yeah, you need to enable dhcp relay

@RouteRider. thanks! so it should be ExStart

Need clarification on below questions:

Which two addresses types are included in NAT?
A. inside global
B. global outside
C. outside internet
D. inside internet
E. outside local

B,E OR A,E?

Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. ip forward-protocol
D. service DHCP

D OR C?

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the client’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp authentication ms-chap-v2
C. ppp authentication chap
D. ppp authentication ms-chap callin
E. ppp authentication ms-chap-v2 callin

D OR B?

Verify 4 questions
Inbox
x
Tech Snafu

Nov 19, 2018, 8:17 PM (6 days ago)
Hi, I am using 300-101 dumps from you guys and need some verification on below 4 questions. Please verify. (Q1 on PDF) A network engineer is enabling RIPng on a
3
Tech Snafu

Nov 22, 2018, 11:50 AM (3 days ago)

to 591
No updates but looks like you updated PDF. I have some more :)

(Q203 on PDF)

Which two addresses types are included in NAT?
A. inside global
B. global outside
C. outside internet
D. inside internet
E. outside local

PDF says B and E but it should be A annd E. Correct answer should be “inside global” and “outside local” NOT B.

From Cisco:

Term Definitions

Cisco defines these terms as:

Inside local address—The IP address assigned to a host on the inside network. This is the address configured as a parameter of the computer OS or received via dynamic address allocation protocols such as DHCP. The address is likely not a legitimate IP address assigned by the Network Information Center (NIC) or service provider.

Inside global address—A legitimate IP address assigned by the NIC or service provider that represents one or more inside local IP addresses to the outside world.

Outside local address—The IP address of an outside host as it appears to the inside network. Not necessarily a legitimate address, it is allocated from an address space routable on the inside.

Outside global address—The IP address assigned to a host on the outside network by the host owner. The address is allocated from a globally routable address or network space.

(Q207 on PDF)

THe PDF says the answer is A but is should be should be C

From Cisco:

Step 5 ipv6 bandwidth-percent eigrp as-number percent

Example:

Device(config-if)# ipv6 bandwidth-percent eigrp 1 75

Configures the percentage of bandwidth that may be used by EIGRP for IPv6 on an interface

(Q195 on PDF)

Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. ip forward-protocol
D. service DHCP

The PDF says D but it should be C.

(Q81 on PDF)

A network engineer executes the show ip cache flow command. Wich two types of information are displayed in the report that is generated? (Choose Two)
A. top talkers
B. flow export statistics
C. flow sample for specific protocols
D. MLS flow traffic
E. IP packet distribution

The PDF says B, C but it could be C and E. Please verify
Tech Snafu

Nov 23, 2018, 6:40 PM (2 days ago)

to 591
1 issue of lab question:

(Q226-222_4 on PDF)

What is the advertised distance for the 192.168.46.0 network on R1?

A. 333056
B. 1938688
C. 1810944
D. 307456
The PDF says C but is should be D. Here is some explanation:

To check the advertised distance for a prefix we cannot use the “show ip route” command because it only shows the metric (also known as Feasible Distance). Therefore we have to use the “show ip eigrp topology” command:

R1_show_ip_eigrp_topology.jpg

There are two parameters in the brackets of 192.168.46.0/24
prefix: (1810944/333056). The first one “1810944” is the Feasible Distance (FD) and the second “333056” is the Advertised Distance (AD) of that route -> A is correct.

Just for your reference, this is the output of the “show ip route” command on R1:

R1_show_ip_route_advertised_distance.jpg

In the first line:
D 192.168.46.0/24
[90/ 1810944] via 192.168.12.2, 00:10:01, Ethernet0/0

The first parameter “90” is the EIGRP Administrative Distance. The second parameter “1810944” is the metric of the route 192.168.46.0/24
. R1 will use this metric to advertise this route to other routers but the question asks about “the advertised distance for the 192.168.46.0 network on R1” so we cannot use this command to find out the answer.
Tech Snafu

2:10 PM (3 minutes ago)

to 591
Please update. I have some more and these should be the last. I have the test in 2 days to update would be appreciated.

(Q181 on PDF)

Which two commands would be used to troubleshoot high memory usage for a process? (Choose two)
A. router#show memory allocating-process table
B. router#show memory summary
C. router#show memory processor statistics
D. router#show memory dead
E. router#show memory events

The PDF says A,B but I tried “show memory allocating-process table” on live router and that command does not exist. It has events and processor statistics commands. It does have “show memory allocating-process total”

(Q174 on PDF)

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the client’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp authentication ms-chap-v2
C. ppp authentication chap
D. ppp authentication ms-chap callin
E. ppp authentication ms-chap-v2 callin

The PDF says D but it could be B. This one I am not too sure but I believe v2 enables ability to change expired password.

(Q81 on PDF)

A network engineer executes the show ip cache flow command. Wich two types of information are displayed in the report that is generated? (Choose Two)
A. flow export statistics
B. MLS flow traffic
C. flow sample for specific protocols
D. top talkers
E. IP packet distribution

The PDF says A, C but I have seen C, E on various sites

(Q56 on PDF)

what are the two correct statements about enable secret and enable password command
A. if both commands are missing from the global configuration, vty lines use the console password
B. the enable secret command overrides enable password
C. the enable password command has a strong encryption algorithm than enable secret
D. the enable secret command is backwards compatible with more versions of IOS
E. the enable secret and enable password commands must be used together

The PDF says A,B but I have seen B,D on various sites.

(Q134 on PDF)

Which adverse circumstance can the TTL feature prevent
A. routing loops
B. DoS attacks
C. link saturation
D. CAM table overload

The PDF says B but I am pretty sure is is A. It prevents routing loops.

(Q87 on PDF)

What happends when unicast flood protection is triggered on a VLAN?
A. The VLAN is shut down
B. Traffic on the VLAN is load-balanced across multiple links
C. The VLAN is removed from the VLAN database
D. Traffic on the VLAN is passed to another VLAN with lower load

The PDF says A but I have seen D on digital tut.

(Q113 on PDF)

Which three functionalities are specific to stateful NAT64? (Choose Three)
A. It conserves IPv4 addresses.
B. It requires IPv4-transalable IPv6 address
C. No constraint is put the number of endpoints due to 1:N translation
D. It helps ensure end-to-end address transparency and scalability.
E. A state or bindings are created on every unique translation.
F. It requires either manual or DHCPv6 based address assignment for IPv6 host.

ACE OR AEF?

Where can I find dumps

Yoshimitsu November 25th, 2018
In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State

Really confused on this… A, B, or D??????

its B

Avoid scams – if you want to pass pay the premium cost here at digitut.com, if you know what you are doing a one month subscription will get you a 80% pass. Been using these guys for years now and it is always the same, folks in comments say exam has changed and scammers post old question pools (I think they get them from digitut) .
I do recommend if you can afford it and want to actually learn Boson is a good route, The exam questions are NOT exact but the theory is there and if you learn it you can pass it. The Boson Netsim is a good tool for practicing commands as well. I have Cisco packet Tracer and also GNS3. GNS3 is hands down the best (if you can get IOS files) Compared to Boson, I like Boson because the labs are already developed and laid out.
Whats my first favorite comment I see here?
“Send me dump I have three days to pass exam” – LOL come one!
Whats my second favorite comment?
“The exam has changed none of the questions are the same!”
Why do I push for folks to pay for a subscription here?
Simple, I am lazy I hate studying just give me the facts This is where a subscription at this site comes in. I want this place to be around in three years when I have to take the CCNP troubleshoot exam to keep my certs. No I want wait 2 years and 358 days to take the exam LOL…

Can someone please confirm the answers for the below 3 questions? My exam is in a few hours.

1.How does an EVN provide end-to-end virtualization and separation of data traffic from multiple networks?
A. on the edge interface, with vnet tag
B. on the edge, with 801.q
C. on the trunk, with vnet tag
D. on the trunk, with 802.1 q
Is the Answer A or C?

2. Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent
and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will
result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
Answer: AB Or AC?

3. Which two statements about configuring Frame Relay point-to-multipoint connections are true? (Choose two)
A. They ignore the broadcast keyword in the frame-relay DLCI mapping.
B. They requireasd the same DLCI on each side of the link.
C. Changing a point-to-multipoint sub interface to a different type requires the interface to be deleted and recreated.
D. They require the frame-relay mapping command to be configured.
E. They require inverse ARP.
Answer: CD or DE?

Can someone please confirm the answers for the below 3 questions? My exam is in a few hours.

1.How does an EVN provide end-to-end virtualization and separation of data traffic from multiple networks?
A. on the edge interface, with vnet tag
B. on the edge, with 801.q
C. on the trunk, with vnet tag
D. on the trunk, with 802.1 q
Is the Answer A or C?

2. Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent
and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will
result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
Answer: AB Or AC?

3. Which two statements about configuring Frame Relay point-to-multipoint connections are true? (Choose two)
A. They ignore the broadcast keyword in the frame-relay DLCI mapping.
B. They requireasd the same DLCI on each side of the link.
C. Changing a point-to-multipoint sub interface to a different type requires the interface to be deleted and recreated.
D. They require the frame-relay mapping command to be configured.
E. They require inverse ARP.
Answer: CD or DE?

1) Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing

2) QUESTION about Choose best IP SLA deployment cycle that reduce deployment.
Answer: Baseline Network Performance, Undertanding Network Performance Baseline, Quantify Results, Fine Tune and Optimize.

3)One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list. Correct answer has to be with a word “inside local”. Second correct options you will
Something “this list will be translated to this subnet (which is pool)”. DO not choose it translates one-to-one

4) What Snmp v2c use for authentication
Answer: community string

5) One long queadstion about router get ipv6 infos from ISP. Now it have to distribute name server and other options to hosts (LAN).
Choices

6) one new DND about DMVPN, meaning of HUB, SPOKE, mGRE, NHRP.

7) One DND Frame relay LMI extensions.

8) one question about ipv6 eigrp features supported (choose 2)
Answer: scaling and partial updates.

9) QUESTION about PADO, PADI, PADR Answers: PADR(PPPoE Active Discovery Request) and PADI (PPPoE Active Discovery Initiation)

LABs: EIGRP Stub, OSPF and EIGRP redistribution, PBR all labs from DigitalTut.

10) New question about SNMP
Which security level is supported throughout all snmp versions?
-authPriv
-authNoPriv
-noAuthNoPriv
Answer: noAuthNoPriv

1) Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing

2) QUESTION about Choose best IP SLA deployment cycle that reduce deployment.
Answer: Baseline Network Performance, Undertanding Network Performance Baseline, Quantify Results, Fine Tune and Optimize.

3)One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list. Correct answer has to be with a word “inside local”. Second correct options you will
Something “this list will be translated to this subnet (which is pool)”. DO not choose it translates one-to-one

4) What Snmp v2c use for authentication
Answer: community string

5) One long queadstion about router get ipv6 infos from ISP. Now it have to distribute name server and other options to hosts (LAN).
Choices

6) one new DND about DMVPN, meaning of HUB, SPOKE, mGRE, NHRP.

7) One DND Frame relay LMI extensions.

8) one question about ipv6 eigrp features supported (choose 2)
Answer: scaling and partial updates.

9) QUESTION about PADO, PADI, PADR Answers: PADR(PPPoE Active Discovery Request) and PADI (PPPoE Active Discovery Initiation)

LABs: EIGRP Stub, OSPF and EIGRP redistribution, PBR all labs from DigitalTut.

10) New question about SNMP
Which security level is supported throughout all snmp versions?
-authPriv
-authNoPriv
-noAuthNoPriv
Answer: noAuthNoPriv

1) Choose 2 methods for migrating routing protocols
Answers: Changing AD distance and Redistributing

2) QUESTION about Choose best IP SLA deployment cycle that reduce deployment.
Answer: Baseline Network Performance, Undertanding Network Performance Baseline, Quantify Results, Fine Tune and Optimize.

3)One new question with choose correct statement about nat. You will see configuration of nat with nat pool (Dynamic Nat)
Answers: There were list config for private add. 2 similar options for this list. Correct answer has to be with a word “inside local”. Second correct options you will
Something “this list will be translated to this subnet (which is pool)”. DO not choose it translates one-to-one

4) What Snmp v2c use for authentication
Answer: community string

5) One long queadstion about router get ipv6 infos from ISP. Now it have to distribute name server and other options to hosts (LAN).
Choices

6) one new DND about DMVPN, meaning of HUB, SPOKE, mGRE, NHRP.

7) One DND Frame relay LMI extensions.

8) one question about ipv6 eigrp features supported (choose 2)
Answer: scaling and partial updates.

9) QUESTION about PADO, PADI, PADR Answers: PADR(PPPoE Active Discovery Request) and PADI (PPPoE Active Discovery Initiation)

LABs: EIGRP Stub, OSPF and EIGRP redistribution, PBR all labs from DigitalTut.

10) New question about SNMP
Which security level is supported throughout all snmp versions?
-authPriv
-authNoPriv
-noAuthNoPriv
Answer: noAuthNoPriv

Refer a diagram with 3 routers (H1(with IPv6 IP and Loopback 1.1.1.1) +R1 (with IP IPv6 and Loopback 2.2.2.2) +R2 (with IP IPv6 and Loopback 3.3.3.3)
running with EIGRP 100 on both routers and what command you will implement so that you will see the loopback IP of R2 to be advertised at H1
A. H1(config t)#router eigrp 100
H1(config t)#no stub only
B. R2(config t)#router eigrp 100
R2(config t)#no stub receive only
C. H1(config t)#ipv6 router eigrp 100
H1(config t)#no stub only
D. R2(config t)#ipv6 router eigrp 100
R2(config t)#no stub only
Answer :
12. What will be shown when you do the “show track 1”?
A. Information statistics
B. Information of track list 1
C. Information of track list object 1
D. information about the IP route track table
Answer : B
13. Which type of information is displayed when a network engineer executes the show track 1 command on the router?
A. Tracking information statistics.
B. Information about tracking list 1.
C. Information about track list object 1
D. (I forgot)
Answer : B
14. Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C
15. Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
16. In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D , Dexter’s dump is A
17. What from the following can cause an issue for URPF? (this could be single answer or multiple choice)OR Reasons why urpf may fail:
A. Assymetrcfasic routing
B. Cef not enabled
C. Urpf not applied to the traffic source
D. If it is used as ingress filtering
Answer: A
18. What does radius server combine ?(choose two)
A. Telnet
B. Authentication
C. Accounting
D. Authorization
E. SSH
Answare: BD

1. refer to exibit which two reasons for ip sla tracking failur are likely true? choose two

the source-intreface is configured incorrectly
the destination must be 172.30.30.2 for icmp-echo.
a route back to the R1 LAN network is missing in R2
the default route has wroung next ip address
the threshold value is wrong

x.-header, in order to filter future attacks? choose three

trafic class
*source address
*flow label
hop limit
*destination address
fragment offset

x.which three NTP operating modes must the trusted-key command be configured on for authentication to operate properly?

*cliente
*peer
*brodcast
interface
server

x. Considere this scenario . TCP traffic is blocked on port 547 between a DHCPv6 relay and DHCPv6 server that is

configured for prefix delegation which two outcomes will result when the relay agent is rebooted.? choose two

*A route will no obtain DHCPV6 prefix
dhcp6 clients will be unreacheble
*hosts will not obtain dhcpv6 address
the dhcp relay agent will resume distribuiting address
dhcpv6 address conflicts will occur on downstream clients

x.What is the NHRP role in DMVPN? (Choose 2)

*A. obtains the next-hop to be used for routing
B. routes the packet through the tunnel
C. identifies the PIM-SM RP used to route the packet
*D. can authenticate VPN endpoints
E. It requires each tunnel endpoint to have an unique network ID

x. other than working EIGRP configuration which option must be the same on all routers for EIGRP authentication key

rollover to work correctly?

SMTP
SNMP
PASSWORDS
*TIME

X.up/down INTERFACE WHAT LOG SEVERITY LEVEL?

3
4
*5
0

X.Which two commands do you need to implement on the CALLING router to support the pppoe client ? (choose Two)

A. peer default ip address pool
*B. mtu
C. bba-group pppoe
D. pppoe enable group
*E. pppoe-client dialer-pool-number

X.-IP CEF LOAD-SHARING OPTIONS

*TUNNEL
UNIVERSAL
INCLUDE-PORTS
*SOURCE
*DESTINATION

X.-WHICH TYPE OF INFORMATION IS DISPLAYED WHEN A NETWORK ENGINEER EXECUTES THE SHOW TRACK 1 COMMAND ON THE ROUTE?

INFORMATION ABOUT TRACKIN 1
TIME TO NEXT POLL FOR TRACK OBJECT 1
INFORMATION ABOUT THE IP ROUTE TRACK TABLE
*TRACKING INFORMATION STATISTICS

X.If you configure one router in your network with the auto-cost reference bandwidth 100 command, which effect on the

data path is true?

*A. The data path remains the same for all links.
B. The data path changes for 10 Mbps links only.
C. The data path changes for all links.
D. The data path changes for 10 Gbps links only.

X.- WHICH STATMET ABOUT STATLESS AND STATEFUL IPV6 AUTOCONFIGURATION ARE TURE?

*BOTH STATELESS AND STATEFUL AUTOCONFIGURATION REQUIERE ADITIONAL SETUP
STATLESS AUTOCONFIGURATION REQUIERES NO ADITIONAL SETUP, WHEREAS STATEFUL AUTOCONFIGURATION REQUIERES ADETIONAL SETUP
STATLESS AUTOCONFIGURATION REQUIERES ADITIONAL SETUP, WHEREAS STATEFUL AUTOCONFIGURATION REQUIERES NO ADETIONAL SETUP
BOTH STATELESS AND STATEFUL AUTOCONFIGURATION REQUIERE NO ADITIONAL SETUP

X.- WHAT IS THE MINIMUM LOG LEVEL FOR THE EVENT GENERETADE WHEN AN ACCES LIST DROP A PACKET?

4
5
3
7
*6

X. REFER TO THE EXHIBIT HOW CAN YOU CONFIGURE A SECOND EXPORT DESTINON FOR IP ADD 192.168.10.1?
———————————————
CONFIGURE TERMINAL
IP FLOW-EXPORT DESTINATION 192.168.10.1 9991
IP FLOW-EXPORT VERSION 9
———————————————

SPECIFY A DIFFERENT TCP PORT
SPECIFY A DIFERENT UDP PORT
*SPECIFY A VRF
CONFIGURE A VERSION 5 FLOW-EXPORT TO THE SAME DESTINATION
SPECIFY A DIFERENT FLOW ID

Need clarification on below questions:

Which two addresses types are included in NAT?
A. inside global
B. global outside
C. outside internet
D. inside internet
E. outside local

B,E OR A,E?

Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. ip forward-protocol
D. service DHCP

D OR C?

You are configuring a Microsoft client to call a PPP server using CHAP. Only the client will be authenticated, but the client’s password has expired and must be changed. Which PPP server configuration allows the call to be completed?
A. ppp authentication chap callin
B. ppp authentication ms-chap-v2
C. ppp authentication chap
D. ppp authentication ms-chap callin
E. ppp authentication ms-chap-v2 callin

D OR B?

Which three functionalities are specific to stateful NAT64? (Choose Three)
A. It conserves IPv4 addresses.
B. It requires IPv4-transalable IPv6 address
C. No constraint is put the number of endpoints due to 1:N translation
D. It helps ensure end-to-end address transparency and scalability.
E. A state or bindings are created on every unique translation.
F. It requires either manual or DHCPv6 based address assignment for IPv6 host.

ACE OR AEF?

First attempt .There is no free dumps they charging .plz can you send to adnandaudzai at gmail.com

hey guys! please update me for latest dump! I got 757q dump. I am not sure if it is valid. is there any other dumps that allow me to pass 300-101.

@Satya Mohapatra
Kindly share dumps plz.
Email: sysdigi001 @ gmail . com

@Satya Mohapatra please share the latest dump with pes_ baris @ hotmail . com. I would be really appricate it.

Best Regards.

Good luck to all who have an exam today lol

Has anyone got the CBT Nuggets CCNP Route videos which they could share? thx

@NetGuy
Create the account on certcollection . org and download which you want.

Anyone can share valid dump to me with my email address: quyetpv144 @ gmail .com
Thank you so much.

Anyone took exam today? Is there any valid dump?

QUESTION 171
A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF adjacencies come up.
Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites

Correct Answer: AD

QUESTION 422
If you convert a WAN connection with OSPF from T1 to a Frame Relay circuit, which two actions must you take to enable the connection? (Choose Two)
A. Change the OSPF network type to nonbroadcast.
B. Manually configure neighbors in the OSPF process.
C. Manually configure the hello and dead timers.
D. Change the OSPF network type to broadcast.
E. Change the OSPF network type to multipoint nonbroadcast.

Correct Answer: AB

Are these two questions have correct answers???