Share your ROUTE v2.0 Experience

Passed 9XX
A lot of new questions, FR and AAAauthorization D&D.
Don’t waste your money, study on official books, netwoooooo pdf and digitaltut.
Lab and simlets are the same.
Thanks to all , specially RouteRider, Yoshimitsu.

good luck and see you on switching.

@Yoshimitsu
I think the key of this question: only this interface not working…

@Rif
C isn’t correct, because my point of view the ENABLE PASSWORD command is provided only for backward compatibility, not enable secret.

@Francussss
Congratulations!
Do you remember new questions?
And is your opinion the digitaltut and all nneettwwoorrkkiinngg dump is enough on the real exam?

@RouteRider

I’m sorry but I was nervous and I do not remember much
FR and AAA authorizatio D&D how in digitaltut, pity that Icould not read them before , but I answered correctly.
There is a problem between 2 BGP router cause mismatch password in a snippet (2 options).
Digitaltut and all nneettwwoorrkkiinngg are enough only if you studied the theory because new questions are a little bit difficult.

Ah there is a question: difference between IPV6 and IPV4 EIGRP.

good luck ans dee you

@francussss
Thanks
How many percent were new question?

@RouteRider

In my case 30% netwwwww , 68% new, 2 % same labs and simlets

Could someone share @nneettwwoorrkkiinngg @ dump?

Really appreciated, thanks!

hi thx
I passed today with 8xx,
to labs EIGRP Stub Simulator and ospf redistribution
and
OSPF Evaluation Simulator
most of questions from 9tut.
easy to pass from 9tut.

no need of dumps
Digitaltut is enough and basic theory concept needed

Hi all,

someone has new spoto dumps ccnp-route??

Regards

@francusss @Routerider could u please share the dump with me? I have been studying with ROUTE book and following the good stuff in here but i dont have the latest dump yet. Would you kindly share it? paulojh.de.sousa ** @ ** gmail

Cheers,

What study??

Official Cert Guide or Implementing CISCO Ip routing??

REgards!

When unicast reverse path forwarding is configured on an interface, which action does the interface take first
when it receives a packet?
A. It verifies that the source has a valid VEF adjacency.
B. It checks the egress access lists.
C. It verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists.
Correct Answer: C or D?

@Pepe
IMO it is D. Ingress ACL

I found:

“If Unicast RPF does not find a reverse path for the packet, the packet is dropped or forwarded, depending on whether an access control list (ACL) is specified in the ip verify unicast reverse-path interface configuration command.”
https://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.html

So “C” is correct.

Which statement about stateless and stateful IPv6 autoconfiguration are true?
A. Both stateless and stateful autoconfiguration require additional setup
B. Stateless autoconfiguration requires no additional setup, whereas stateful autoconfiguration requires
additional setup
C. Stateless autoconfiguration requires additional setup, whereas stateful autoconfiguration requires no
additional setup
D. Both stateless and stateful autoconfiguration require no additional setup

Correct Answer: A or B?

Can someone share dump? plz

E-mail: Abdo*Ezzat*1897@gmail*.com

@Pepe
When a packet is received at the interface where Unicast RPF and ACLs have been configured, the following actions occur:
Step 1 Input ACLs configured on the inbound interface are checked.
Step 2 Unicast RPF checks to see if the packet has arrived on the best return path to the source, which it does by doing a reverse lookup in the FIB table.
Step 3 CEF table (FIB) lookup is carried out for packet forwarding.
Step 4 Output ACLs are checked on the outbound interface.
Step 5 The packet is forwarded.
https: // www . cisco . com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.html#wp1000928

@Pepe
Configuring IPv6 Stateless Autoconfiguration
SUMMARY STEPS
1. enable
2. configure terminal
3. interface type number
4. ipv6 address autoconfig
So answer A is correct.

@kevin
Q1: “EVN is supported on any interface that supports 802.1q encapsulation, for example, an Ethernet interface. Instead of adding a new field to carry the VNET tag in a packet, the VLAN ID field in 802.1q is repurposed to carry a VNET tag. The VNET tag uses the same position in the packet as a VLAN ID. On a trunk interface, the packet gets re-encapsulated with a VNET tag. Untagged packets carrying the VLAN ID are not EVN packets and could be transported over the same trunk interfaces.” Correct answer C

Q3: D E

Refer to the exhibit. If this configuration is applied to a device that redistributes EIGRP routes into OSPF. which two statements about the behavior of the device are true? (Choose two )

——————————————————————
router eigrp 65535
no auto-summary
network 10.0.0.0 0.0.0.255
router ospf 1
network 192.168.5.0 0.0.0.255 area 0
passive-interface loopback0
redistribute eigrp 65535
————————————————————————–

A. EIGRP routes appears in the routing table as E2 OSPF routes
B. The device router ID is set to Loopback0 automatically
C. The device redistributes all EIGRP networks into OSPF
D. EIGRP routes appears in the routing table as N2 OSPF routes
E. The device redistributes only classful EIGRP networks into OSPF.
F. EIGRP routes appears as type 3 LSAs in the OSPF database.

C&??

Which value does a point-to-point GRE tunnel use to identify a peer?

A. MAC address
B. Configured multicast address
C. DLCI
D. IP address

@francussss Congratulations!!!! Planning to take CCNP route before the year ends. Did you study all 760 questions of nneettwwoorrkkiinngg dumps?

@Yoshimitsu
Yes All the dump. But After i studied two official books.
I will study 6-8 months for each esami. I realize All labs in the books into GNS3. I want understand notizie Just pass the esami

@pjsousa

A. EIGRP routes appears in the routing table as E2 OSPF routes
B. The device router ID is set to Loopback0 automatically
C. The device redistributes all EIGRP networks into OSPF
D. EIGRP routes appears in the routing table as N2 OSPF routes
E. The device redistributes only classful EIGRP networks into OSPF.
F. EIGRP routes appears as type 3 LSAs in the OSPF database.

C&??

I tuoni A E

@pjsousa

For the eigrp question– answer is AE. Reason
A- when you redistribute into ospf, default behavior is to show those routes as E2
E- If you don’t specify the subnet key word ospf redistribute classful network

why other answers wrong
B- By default router-id is gonna be Highest ip address of the loopback( if your are not manually setting up the router-id ) loopback 0 could be the lowest one

C- unless u filter the routes, it will redistribute all those routes. it is the correct answer but since you don’t specify the subnet keyword it will advertise classful 10.0.0 network. eigrp may have many subnets falling under the classful network 10.0.0.0 so we won’t know the all eigrp networks
compare to
D- N2 for external routes redistributed into NSSA area.
F- redistributed routes type 5

Is networkiiing also valid now bro ?

@Francusss @ Saji, thanks for the feedback!

The “no auto-summary” command is confusing me a bit regarding the answer E

Can someone who has taken test recently, check following link and suggest if they are real: ciscoexam*online/CCNP/300-101/fullexam

@Indian,
I may see some new questions but most of it is taken from nnettwwoorrkiing dump file. There is no question regarding “What is VRF-lite” and “How to enable MP-BGP”

@Maya @kaktus

Could you put me inside the group?
a r t h u r. r o uter @ g m a i l. com

@ Indian
It’s an old dump.
There are a lot of questions which are in nowadays on the exam, but not all. And there aren’t a lot of questions from other dumps which are on the exams.

@Kaktus
Does operate Maya’s gmail group?
Is there new SPOTO dump in that group?

Be carefull with Maya i contributed and was in the group for new spoto dumps. And they blocked me.

@Aioli, as you are claiming that you also contributed. could you plz share me your email id to check from my side

@Aioli @sami
I thought it is a possible swindle.

@Aioli @sami
Sure, it’s a swindle. She had never written it here, and after taking the money she never returned to writing. Don’t waste your money, study on netwwwww dumps and digitaltut.

@sami

Does Maya sent you the new dump Spoto?

Avoid scams – if you want to pass pay the premium cost here at digitut.com, if you know what you are doing a one month subscription will get you a 80% pass. Been using these guys for years now and it is always the same, folks in comments say exam has changed and scammers post old question pools (I think they get them from digitut) .
I do recommend if you can afford it and want to actually learn Boson is a good route, The exam questions are NOT exact but the theory is there and if you learn it you can pass it. The Boson Netsim is a good tool for practicing commands as well. I have Cisco packet Tracer and also GNS3. GNS3 is hands down the best (if you can get IOS files) Compared to Boson, I like Boson because the labs are already developed and laid out.
Whats my first favorite comment I see here?
“Send me dump I have three days to pass exam” – LOL come one!
Whats my second favorite comment?
“The exam has changed none of the questions are the same!”
Why do I push for folks to pay for a subscription here?
Simple, I am lazy I hate studying just give me the facts This is where a subscription at this site comes in. I want this place to be around in three years when I have to take the CCNP troubleshoot exam to keep my certs. No I want wait 2 years and 358 days to take the exam LOL…

Hey geys, i just present the exam with 7xx but not was enough to pass. Dumps from neeetworking are valid but some of these, kind of 30%. I remember new questions about vrf-lite and BGP, nat dynamic, when occurr asymetric routing, new drag and drop about stateless and statefull nat 64. Labs are the same. Good luck. I will study a bit more.

@AiolI
You name was not in the list. If you have transferred aNY money. Please send me an email . I will verify and confirm you.

Guys, we are working on dumps, once we have all the info we will share you. I am not here to cheat you. We are here to help each other . I was busy in last days so that’s why no comment on this group.

@ pjsousa,
cisco ios earlier than 15.0 -> auto-summary command by default always enabled that means if u have two interface with ip 10.10.20.1 and 10.10.30.1 with 24 bit mask that means u got two different networks but because of eigrp auto summary command it will show as one network as 10.0.0.0 / 8.
if u disable it by no auto-summary then u see the two different network in eigrp.
Note: Now ios 15 and above auto summary is disabled. nevertheless when u redistributing the eigrp into ospf u need the key word SUBNET in order for u to see those two classless 10.10.20.* & 10.10.30.* networks in ospf. that is two different situation

Maya add me and tell when you are buying SPOTO for ROUTE-exam and up to when it is vaild. You can email at m m m m e x p e r t @ y a h o o . c o m . Please remove the spaces.
MMMexpert

It is 3m’s only
mmmexpert at yahoo dot com
MMMexpert

Is any group buy for SPOTTO Switch exam too.

@Maya
I asked you to add me to the list, but I didn’t get answer…

please send me the latest dumps of 9tut question CCNP Route & switch

Thanks and advance

QUESTION 602
Which two statements are true about EVN? (Choose Two)
A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic
C. It can support up to 16 VNs
D. It uses rdistribution to share routers between VNs
E. It supports SSM only.

Answer: AB or AD

@Maya
Are you busy? I read that the access to the spoto web paga is only for 1 week.
People who have paid maybe have to take the exam tomorrow, they can not wait any longer.
If you really have the dumps you have to pass it already to those who paid. I think it takes a minute to see if they really sent you the money. You can not disappear and say you’re busy.