Share your ROUTE v2.0 Experience
Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
Now I doubt in every message. Is it Scummer or not)
@Glordlord.
I am not a scammer. I just shared with you guys one DUMP for free.
I do not know if this dump is valid as well.
As I said, My friend has a PREMIUM-Account.
The guys that did or will do exams this month, please check this file after the test and share with us if these questions are new or not.
It’s not rocket science to figure out who is the scammer here. If someone wants to sell you something which you can get for free (once it is available) then you have a good indication. :)
@Router Learning is definitely not a scammer as he shared some questions with you for free.
Yea, there are some dumps under this link but I don’t know if they are valid. Someone else needs to confirm. There are only MCQ in this file (no D&D at all)
@Kakut I’m going through those questions I’ve the exam scheduled next week but hopefully someone will confirm till then, If not then I guess I’ll be the chosen one.
I mean Kaktus ;)
@Kaktus Kindly send latest and updated dump on this email: sysdigi001 @ gmaildotcom.
Thanks in Advance.
@Router Learning
Thanks of the dumps. it has nice explanation.
The dump is legit if have the following questions…appeared in the exam
1.) What is VRF Lite?
2.) Command that makes BGP support multiple protocols? (Not exact question)
3.) The D&D of Stateful and Stateless NAT64 have options regarding ALG
@router learning , thanks for the dump, these look legit , can we verify that are actually used on the exam though??
I would verify that 195q dump is not valid but 60% are covered by the 757q dump others are new (can answer if know the concept). LABs are OSPF, EIGRP Stub and EIGRP & OSPF Redistribution..EIGRP evaluation (the one have routers)
The D&Ds are Frame Relay and NAT64 Stateful and Stateless but with modifed choices.I would thank MED for providing the VRF Lite hint..nneettwwoorrkkiinngg and digitaltut…
I passed the exam…
@Router Learning, I bought pass4sure and got the same exact dumps as yours. I hope it is valid
Hi Quite, Do you info about D&D choices in your exam.
Please sebd me some detail. Thanks.
Mayaalikhan35 @ gmail. com
Hi Quite, can you check the 190q from Router learning and confirm if its valid?
Upon reviewing the 190q, none of the questions appeared…sorry. I still go with the 757q
The D&D of Frame Relay is a frame relay config…a bit similar to previous Frame Relay D&Ds, forgot the exact options
The D&D of NAT64 Stateful and stateless is also same..just there are two options modified…somthing FTP64 ALG and Not supported ALG
Thanks quiet for taking time to validate.
Quiet when did you take the exam?
I think Router learning’s 190Q dump is not valid. It is an earlier version from examcollection, and if 60% of the questions comes from 757q we should find questions of this dump in 757Q. But I can’t find them there.
@Quiet
Please, can you check 757Q dump? We will be grateful.
I failed the exam. Ive used the 757q most of the answers are confusing. There are new questions as well that did not appear in 757q
@Quite
it this D&D for stateless and stateful:
vce guide . com / drag-and-drop-each-nat64-description-from-the-left-onto-the-corresponding-nat64-type-on-the-right/
?
@Quiet kindly guide for the exam and new questions.
@Kaktus
80% of it…1:N was phrased differently, then have an FTP64 ALG option and another ALG
@Gaylord
As mentioned, 60% appeared…I remember a new question that looks like this…
What are the LSAs of a stub area?
a. 3 and 5
b. 1,2,3
c.1,2,3,4,5 and 7
d. (I forgot)
Ans. B
@Quiet
You mean new question like this example?
Which LSAs present in OSPF stub area?
A. LSA 1,2,3,4,5
B. LSA 1,2,5
C. LSA 1,2,3
D. LSA 3,5
Answer: C
@Camp
Yes
@Quiet
How mant questions regarding IPv6 (and related ones)? IPv6 is my Achilles’ heel :(
No questions regarding ipv6 appeared…
New question regarding command the enables BGP to support multiprotocol
a. no bgp default ipv4 unicast
b. bgp default ipv4 multicast
c. bgp default ipv4 unicast
d. bgp address family ipv4 unicast
This is a new question..not sure with the answer
Ok, guys I have not went through to the entire 757Q yet, but the LSA OSPF question posted above and answer is NOT new… at least not to digitaltut, cuz I have found it under the OSPF questions section 2.
Ok, the BGP question you have mentioned I havent found so thats new. :D
@Quite
Answer to your questoin is A (no bgp default ipv4 unicast)
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_l3_vpns/configuration/15-mt/mp-l3-vpns-15-mt-book/mp-bgp-mpls-vpn.html
But this question is for CCIE R&S not CCNP…
Did you encounter any questions regarding to ‘route reflector’? It is used in BGP.
This question (BGP) was in my exam too (5 November) :(
@Kaktus
No, this is the only BGP related question that appeared
No dumps is valid now
What if they added CCIE topics to our exam ? what are we gonna do guys?
@David
Cisco can cause surprise…
I think they should notify us about this.
It is not a correct action from they.
Been using this site (CCNA and CCNP ) for like years, and I mean years. Whenever there is a life changing event with CISCO tests, they post it as a note on the site. I pay for premium membership and those answers (and labs) have always been more than enough to pass.
Wish they would have a share your experience just for premium members to keep the riff raff comments away. I do though google every question that pops up in the comments is a valid learning tool. After all studying is studying. So I appreciate the questions.
What is funny is folks will say questions are new, and if one searches the question is listed on one of the lists available here or one of the premium member questions. My two cents? First cent: Buy a premium membership study. Memorize the labs those are an easy points! Scoring perfect on labs allows you to mess the 10 to 20% of questions that will confuse you.
2nd cent : Stop telling scammer to leave, they don’t read English, is to funny to watch folks kick up a storm and use profanity against a group that will not go away. Just ignore them. Your anti-scam posts just add to the BS posts that are here and do no one any good. Wish all of the best of luck! I am hoping to go for route in 2 weeks. Passed switch last month. And funny folks were saying “test had changed”. Premium membership was spot on.
@ Klueliss
that’s good one.
@Klueliss
I have studied nneewwootthh 757 questions, 104 most popular, all composite and each section test from this site, scoring 90 percent for each test. I feel I am ready . What do you think?
Passed ROUTE today. There were some questions (around 20% including drag and drop) that are not in digitaltut but if all the lab were right on the mark. Thank you digitaltut <3
Hi oakint is 80 percent of the questions found on the premium section?
Yes anonymous
May i ask how many questions are there?
In the premium section i mean
11. Regarding a diagram with 3 routers (H1(with IPv6 IP and Loopback 1.1.1.1) +R1 (with IP IPv6 and Loopback 2.2.2.2) +R2 (with IP IPv6 and Loopback 3.3.3.3)
running with EIGRP 100 on both routers and what command you will implement so that you will see the loopback IP of R2 to be advertised at H1
A. H1(config t)#router eigrp 100
H1(config t)#no stub only
B. R2(config t)#router eigrp 100
R2(config t)#no stub receive only
C. H1(config t)#ipv6 router eigrp 100
H1(config t)#no stub only
D. R2(config t)#ipv6 router eigrp 100
R2(config t)#no stub only
Answer :
12. What will be shown when you do the “show track 1”?
A. Information statistics
B. Information of track list 1
C. Information of track list object 1
D. information about the IP route track table
Answer : B
13. Which type of information is displayed when a network engineer executes the show track 1 command on the router?
A. Tracking information statistics.
B. Information about tracking list 1.
C. Information about track list object 1
D. (I forgot)
Answer : B
14. Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?
A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT
Answer: C
15. Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID
Answer: C
16. In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D , Dexter’s dump is A
17. What from the following can cause an issue for URPF? (this could be single answer or multiple choice)OR Reasons why urpf may fail:
A. Assymetrcfasic routing
B. Cef not enabled
C. Urpf not applied to the traffic source
D. If it is used as ingress filtering
Answer: A
18. What does radius server combine ?(choose two)
A. Telnet
B. Authentication
C. Accounting
D. Authorization
E. SSH
Answare: BD
What is VRF-lite?
A, VRF without mpls
B, VRF without VPN
C, VRF without independent route tables
D, other option
A question on rate-limiting with ACLs and how to configure them.
d
A question that had some AAA config. When the user logs in, the show run command is automatically executed and then logs them out (or similar).
Other than that nneetworkking will help you
please where do i get the labs to study, i have my exam in a week
@ Klueliss
What is the big diiferent between premium membership and the free one?
Are the Dumps (if there are any) in premium membership are actual or are the same like here
if some good guys work the create a vce or pdf about latest dumps.
I have no glue, please can you discribe the benefits of premium membership.
Thanks you @ Klueliss
I agree with Klueless, i took the exm yesterdy and failed, by 10 points… 2nd time round
1st time had lots of ipv6 q’s and ip sla’s, AAA and MSS COPP DnD’s, with 3 labs( usual one’s on here
2nd time round had lots of new questions not found in netttworrrrking dump, or dexta i would say out of the 53 questions maybe 10-15 found in dexta. New questions were to do with what ewqw says^ also 1 about IS-IS migrating to new protocol with lower ad, i choose ospf and eigrp
as IS-IS has 115 AD, Labs again were same on this site i had OSPF virtual-link, EIGRP Evaluation, EIGRP Stub.. no problems there just did’nt expect lots of Netflow q’s and IP SLA q’s with which is right or wrong with the config…. will try again soon, watch out people and know all these new things inside and out. Good luck, thanks Digitaltut
Hi Guys,
I am going to take the exam next monday. I am trying to review all the stuff from youtube videos and netwoooorkiiiing q’s and questions i find here on your comments and site. Any nice tip will be apreciated.
Thanks all
BR
@and1lan
if you have time in ur exam try to write some new questions and share them here
thanks