Share your ROUTE v2.0 Experience

@RouteRider – Please send the dumps to mmeedd0509((@))gmail.com
THXXXXX

test

Remove space and download

g o o . g l / R 8 J j 9 U

Awesome dumps

VCE Test Simulator included

https : // www . file – upload . com /2lcargqz6oml

best courses materials please leave a comment and join our blog many materials are coming soon

In the question about blocking **outbound** web traffic, why is ” ip access-group 102 **in**” the correct answer per networkingg dump?

Which configuration can you apply to a device so that it always blocks outbound web traffic on Saturdays and Sundays between the hours of 1:00 AM and 11:59 PM?

A. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 permit udp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 out

B. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in

C. time-range SATSUN periodic Saturday Sunday 1:00 to 11:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in

D. time-range SATSUN absolute Saturday Sunday 1:00 to 23:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in

Correct Answer: B

Hi all,
I need your recommendations,

I studied official book and How to master, do I need to be a premium member to pass the exam, I also studied 757q. 15 dolars is not much money but, in my country PayPal and other payment methods is not available, I tried every kind of thing but could not pay the fee. The digitut guys advised me bitcoin but I don’t understand that. Are there any questions which I have available to study except networking dump when I got premium account? I need to know how vital to be a premium?

Hi

Please send Dump 300-101

my email
alisaadd1990@ gmail.com

PLZ

.,:(*_*):.,
|||

PLZ
send to me Dump 300-101
alisaadd1990@ gmail.com

PLZ
send to me Dump 300-101
heat1304@ gmail.com

In the question about blocking **outbound** web traffic, why is ” ip access-group 102 **in**” the correct answer per networkingg dump?

Which configuration can you apply to a device so that it always blocks outbound web traffic on Saturdays and Sundays between the hours of 1:00 AM and 11:59 PM?

A. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 permit udp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 out

B. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in

C. time-range SATSUN periodic Saturday Sunday 1:00 to 11:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in

D. time-range SATSUN absolute Saturday Sunday 1:00 to 23:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in

Correct Answer: Bv

Could you guys help with the following 5 questions please?

QUESTION 552
which condition prevents the establishment of a DMPVN tunnel between two spokes ?
A. HSRP is enabled on the spoke devices
B. IPsec is enabled on the spoke devices
C. the two spokes are behind different PAT devices
D. the two spokes have different tunnel keepalive settings.
Correct Answer: D
Keepalives does not need to match, the tunnel key should match. So the answer should be C

QUESTION 675
A network engineer is enabling RIPng on a new customer link Under which configuration mode is RIPng enabled?
A. Global
B. Router
C. Interface
D. IPv6
Ans A or C

QUESTION 616
Which two causes of latency are true? (Choose two)
A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilizaion of a link
Correct Answer: CE or CD

QUESTION 711
On a Frame relay, we are unable to ping the remote router, how to solve the problem?
A. DLC is active
B. DLC is not active and deleted
C. Frame Relay map is configured
D. Need and ACL to allow PING
Correct Answer: C. Question ask about how to solve the problem so the ans may be C

QUESTION 737
Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol
Correct Answer: A? ip helper-address applied under interface config mode, the question ask about Global config mode. Ans Should be D
Could you guys help with the following 5 questions please?

QUESTION 552
which condition prevents the establishment of a DMPVN tunnel between two spokes ?
A. HSRP is enabled on the spoke devices
B. IPsec is enabled on the spoke devices
C. the two spokes are behind different PAT devices
D. the two spokes have different tunnel keepalive settings.
Correct Answer: D
Keepalives does not need to match, the tunnel key should match. So the answer should be C

QUESTION 675
A network engineer is enabling RIPng on a new customer link Under which configuration mode is RIPng enabled?
A. Global
B. Router
C. Interface
D. IPv6
Ans A or C

QUESTION 616
Which two causes of latency are true? (Choose two)
A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilizaion of a link
Correct Answer: CE or CD

QUESTION 711
On a Frame relay, we are unable to ping the remote router, how to solve the problem?
A. DLC is active
B. DLC is not active and deleted
C. Frame Relay map is configured
D. Need and ACL to allow PING
Correct Answer: C. Question ask about how to solve the problem so the ans may be C

QUESTION 737
Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol
Correct Answer: A? ip helper-address applied under interface config mode, the question ask about Global config mode. Ans Should be D

Labs:
1. EIGRP-OSPF redistribution with FastEthernet link between R2 and R3. “distance eigrp 90 105” command under EIGRP on R2 is needed.
2. Policy based routing, same with the dumps
3. OSPF
4. No EIGRP nor OSPF evaluation for me

New DND:
1. Search for the definition of add regisration, global addressing, multicastion, simple route (not sure)
2. DMVPN features about hub, spoke, mGRE, NHRP

New questions:
1. Migration of protocols: Changing of administrative distance (AD), redistribution
2. SNMPV v2c use for authentication: Community String
3. Best IP SLA deployment cycle: Baseline Network Performance, Understand Network Performance Baseline, Quantify Results, Fine Tune and Optimize
4. What are true about the statement above? Statement shows ip nat source inside configuration for private ip 10.0.0.0 /27, then it will be natted to pool of public IP address with /27 subnet as well.
I forgot the choices but you can answer it if you fully understand how nat works.
5. IPV6 EIGRP features: scaling, partial updates
6. Question about PPPoE signaling, choose 2: Read about PADI/PADO/PADR/PADS/PADT and its meaning.
7. Netflow version 9 question: IETF standard, ingress/egress
8. Security level supported for all SNMP version. Not sure about my answer for this one.

Overall, I would say that Dexter dussdamps is still valid. Just understand the concept behind each question. Study the labs and master the drag and drop.
For the new questions, looks like it will show on every exam takers based on my observation. Study it.ad

asscheeks

Hi
what Network Simulator is everybody using to do the labs?

I dont have IOS for GNS3.
Thanks for the help.
Paul.

I mad a GROUP-MAIL, for anyone who want CCNP-DUMPS 757q , please send me a mail at mmeedd0509 @ gmail . com
Feel free to share Last dumps also :)
Best luck for every one

Hi MED, please, add my email to this group.
{email not allowed}

lecturesbooks @ gmail. com

Hello every one ! Please how can I open a ete extension file because a friend gived me a recent version of the exam 300-101 but I can’t open it . Do you have the software to open ete file

@Millinimue please can u write me mail ? i can help u
yamenmehdizade @gmail.com

Here: https://fileinfo.com/extension/ete

There is no new-latest dumps yet …

@@@@@@@@@@@@@@acme,

I think the question is worded poorly.

I believe the answer should be CD for the following reasons.

An NSSA is a type of stub area and can either be stub or totally stubby (nssa no-summary makes it totally stubby). By default NSSA areas dont get a default route. You have to configure default-information-originate for it to get a default route.

A backbone area isn’t a type of area. Its just another way of referring to area 0. It wouldn’t make sense for area 0 to need a summary default route.

Same thing with a normal area, why would they need a summary route in a normal area.

That leaves CD.

Stub and totally stubby,

Instead of propagating external routes (type 5 LSAs) into the area, the ABR injects a type 3 LSA containing a default route into the stub area. This ensures that routers in the stub area will be able to route traffic to external destinations without having to maintain all of the individual external routes. Because external routes are not received by the stub area, ABRs also do not forward type 4 LSAs from other areas into the stub.

Stub and totally stubby areas filter LSA type 5 which prohibits them from learning external routes. As a result they learn a summary default route that points their traffic to the next hop address they would need to use to send traffic to all other networks. The default route points to whatever interface the LSAs are coming in on.

Please correct me if i have this wrong.

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13703-8.html
http://packetlife.net/blog/2008/jun/24/ospf-area-types/

hello
any news on which is the wworking latest dump?

Is it possible to pass the exam sufficiently with nneettwworrkkinng_v2.1 -> q763.

It’s not sure about that.

Where i can found
nneettwworrkkinng_v2.1?
Tks

Hi All, Got my exam in the next couple of weeks. Which Dumps should I follow ?

Does anyone have the dump? Trying to write the exam within a week. I would really appreciate if someone can email me @ {email not allowed}. Thanks

Hello, could someone direct me where i can find the latest dump ? thanks

@CHI YEUNG or anyone here with the dumps from CHI YEUNG, please kindly forward me a copy of it to bazighk at yahoo . com

@Johango11 how many new questions did you see in the exam? Any new Drag and Drop?

@CHI YEUNG, Yamen, Elvis87 or anyone else here, kindly send me the dumps from CHI YEUNG and Nneettwwoorrkking dumps 759q and 195q dumps to my email address:
alihsn88 @ outlook. com

if anyone receives the dumps from chi yeung. can you please share here

@All, i am not sure if Chi Yeung will be here soonest or if he bought the PDF version of the dumps. Outside this, it would be really nice to have collective and trusted individual who can join forces to purchase this dumps together. I am will to take part in that. Else we can all wait till someone who is of kind heart offers us all this very dumps.

@GO AND GET FREE DUMPS

Why are you taking exams every day twice or third i think you are trying to getting marks out of 1000/1000 until you will not achieved your goal you will continue your F**king Advertisement here for your what’s up group :P

@GO AND GET FREE DUMPS
Are you free?
Be moderate, please.
FuXXKING man

@Fie

Why are you taking exams every day twice or third i think you are trying to getting marks out of 1000/1000 until you will not achieved your goal you will continue your F**king Advertisement here for your what’s up group :P

Kindly assist me with the 757 questions brightonmwabab @ gmail. com

Hi, would someone kindly share a valid DUMP, please? i have been jumping over all links where everyone is asking for money. Is not about paying for something but trying to avoid people cheating on you. Thanks in advance, Cheers.

@ Chilli

According to Cisco documentation A answer is correct.
“NOTE

Once you create a specific type of subinterface, you cannot change it without reloading the router. For example, you cannot create a multipoint subinterface serial0.2 and then change it to point-to-point. To change it, you need to either reload the router or create another subinterface. This is the way the Frame Relay code works in Cisco IOS software.”

http : // www . ciscopress . com / articles / article.asp?p=170741&seqNum=5

@ Gk @ abdulrahmansh

Q693
According to the question: “Company is deploying a multicast application that must be accessible between sites, BUT MUST NOT TO BE ACCESIBLE OUTSIDE OF THE ORGANIZTION”
FF02:/16 is a simple multicast, which is accessible everywhere, but FF08:/16 is a kind of multicast which is accessible only inside of an organization.
The correct answer is D!

guys please assist with the 757 questions brightonmwabab @ gmail. com

failed 76*.. bad luck with questions.. i dont remember the new questions, most questions didnt come out of the dumps i have..

there are even new drag and drops.. alot of bs questions about frame relay, vpn services infrastructure services… not many questions about interesting topics…

yes still pissed

@RouteRider – could you please send me those new questions you have collected to ana . bakalarka @ gmail . com? Thanks in advance!

com/s/pmmhgwsuaeh1ecc/300-101_IPHelper_Oct_2018-PDF.pdf?dl=0

@XLA
Those aren’t new question. Those are question from networking q757 which were on the exams last week according to users who wrote here

Chili
November 12th, 2018

Q363
Which two statements about Frame Relay Point-to-Point connections are true? (Choose Two)
A. Changing a point-to-point sub interface to a different type requires the device to be reloaded.
B. They use two DLCIs to communicate with multiple endpoints over the Frame Relay cloud.
C. The device can establish a point-to-point connection to the cloud without a DLCI.
D. They can operate normally without a DLCI map.
E. Each physical interface that extends to the Frame Relay cloud can support a single SVC.
Correct Answers marked as A and B.
Dont think this is right, 99% sure you dont need to reboot after changing the interface type so thats A out, B seems correct, so need to pick one more.
I think D, so B&D ?

this one was on it

@RouteRider – never mind then, thanks anyway. Please let me know if you have anything new.

@CHI YEUNG

can you please share dumps on my email address {email not allowed}

thank you.

@CHI YEUNG

can you please share dumps on my email address john.sventer gmail . com

thank you.