Share your ROUTE v2.0 Experience

I am more scared of ROUTE that Tshoot. TShoot seems to be much easier -_-

I commented on some details on the “popular questions” page about my experience. The short of it was that I got new questions I hadn’t seen anywhere. The recent dumps cover some of them. First test I failed in 20 years of IT certs.

I even started with the 750 page Cisco Press book, read it cover to cover, did all the labs, bought the Cisco CCNP lab book and did all labs, downloaded some other labs and did them, set up an EVE server for simulation, and bought $1,000 of hardware for hands on. I also had access to what was supposed to be the “real” test out of another country – yeah, right. Screwed out of $150 there. I MIGHT have passed with all this 9tut dump, but I thought I had it.

I think if you know your stuff (actually studied), AND dumped from here, you probably could pass. After failing today, I’m going to retake in 5 days. I wasn’t even close though – I clearly got half of the questions wrong, even though I nailed all the sims (they must not be weighted much).

Anyway, probably doable, but not Cisco’s way!

@pissed_off
If you took exam today can you kindly share some questions? Basically the new ones that are not covered in digitaltut and nneettwwoorrking pdf dump file.

tips and information http://certifychat.com/threads/300-101-cisco-ccnp-dumps-quick-tips-to-pass.14817/ pass in one try

Thanks @Elvis87, I think the china forum can provide the new questions..

Funny thing is I had scheduled exam on last Friday 2nd NOV but I rescheduled it just in case questions change on 1st NOV to week later. And on the very Monday 5th NOV they changed -_- Now i had to reschedule it once again. I hate myself

Just my luck, my exam is scheduled monday and i leave on holiday for 3 weeks after..

@Mosh, but, how can we get questions from Chine forum? please, can u help?

This is a china forum bbs . hh010 . com / forum-ccnp-1 . html
I am using google translator. And it seems like the have some kind of points you need to earn then you can see dumps…

@Yamen, i don’t have access to china forum …

@kaktus, u r right,its 421 q from nneettwwoorrking dump?

but options were totally different,it was meaning of option so of concept is clear no issue selecting right answer

I m busy ,but as soon as I remember other question i will post them

So what complete dump can i take now? I have a dump from may 2018.. but it only has 559 questions, meaning that they added until now about 200 questions i dont have… I dont like that risk

The China forum has not yet updated the questions. I am an active member in the forum. As soon as the question bank is released I will update it here in the forum.
Unfortunately there are a lot of spammers and scammers parading themselves as legitimate sellers in this .
Don’t buy questions from any body advertising themselves in this forum.
I was once a victim.

Ok. According to current information from people posting here, we have:
1) From few questions up to 50% from nneettwwoorrkiing dump file (about 750 questions)
2) Questions very similar to existing ones (perhaps they have the same topology/diagram) but the questions is different or have different answer
3) Completely new questions that never appeared before (including D&D)
4) All simlets (EIGRP Evaluation Sim and OSPF Evaluation Sim) and LABS are the same as here

We need to gather information which questions are valid now. I would like to skip learning about 1000 questions…

@pissed_off

I had the same experience when i failed ccnp route two years ago and had redo ccna again. But I think you have every essence of Professional level Network knowledge. They just throw some trivia questions too, like what command u need enter to display certain out put. we need to know how the fundamentals works (not basics) why work like that ….but not necessarily how to do it or implement. As a network Engineer we should know what to do because how to do it can be done via simple search of online. anyway cisco works like that….
since it is expensive 300$ most people end up going to dumps. but dumps should not make us dumb. Yes we need certification, i would go for each question and learn all the options and try to figure it out why those answers are not correct. I’m planning to do the exam end of this month or beginning of the december. i used cisco books, Kevin Wallace video [too simple explanation :( ]
GNS3,,, but don’t worry if u had gone through this mean u can take interview and real life scenario.
i wish u the best for the second attempt. watch online ciscolive sessions which is free, which will make you better Network engineer.

new question for iplsa regarding which option will choose to determine timestamp accurately when packt enter & leaves the interface

Option

1.Responder
2.Trigger
3.xx
4.xx

Answer is Responder

Info:
When the IP SLAs responder is enabled, it allows the target device to take time stamps when the packet arrives on the interface at interrupt level and again just as it is leaving,

It is similar to Q 215 from nneettwwoorrking dump

@inqyuba
“It is similar to Q 215 from nneettwwoorrking dump”
What do you mean?

There isn’t q215 in the nneettwwoorrking dump

——————————————–
Networking – Questions-August = 195
Networking – Questions DAY-1 = 96
Networking – Questions DAY-2 = 89
Networking – Questions DAY-3 = 89
Networking – Questions DAY-4 = 126
Networking – NEW Questions = 125
Networking – EIGRP & OSPF Simlets = 8
Networking – DRAG & DROP = 29
———————————————

Yes, there is q215:

QUESTION 215
Which option must be configured on a target device to use time stamping to accurately represent response times using IP SLA ?
A. Responder
B. Jitter value
C. TCP Connect
d. ICMP Echo

Failed 740/1000.

53q same labs. Only got about 5/6 of 195 questions, all the others were different.

wait wiat Waiting is the right answer.

@Bleh
I am sorry to hear that you failed mate.
Please, can you write any question here if you remember?

Guys for now ,i can remember only below,i am not able to remember some fresh new questions;hope it can help somebody if going for tomorrow

1.432
2.215 (question modified)
3.377
4.363
5.421 (answer & question both modified ,exhibit was same)
6.504
7.new question for setting interface bandwidth with eigrp:
ip bandwidth-percent eigrp
8.420
9.389
10.464
11.700
12.699
13.376
14.374
15.154
16.In which scenario can asymmetric routing occur?-C

A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP

17.184
18.140
19.179 –options were little bit modifie
20.185
21.552
22.Dont remember the question but it was regarding AAA ,when user login ,sh run is executed & session is closed automaticaly
23.474 with modified options

question about PADI ,PADO,PADR- which is brodcast/unicast & from server to client
I selected PADI-broadcast from client to server & PADO -bordcast from server to client
not sure if PADO is unicast from server to client-this option was also there ,other options seems very invalid

24.375
25.OSPF question about diff b/w area range(specify summary route for particular area) & summary address (specify summary route for all area under single ospf process)
26.question about ospf ebgp route priority –decrease OSPF administrative distance
27.308–question modified about redistributing from eigrp to ospf ,how routes will appear in routing table
28.371

LABS ,simlet (copy run start didnt work)
–iv6 lab
–eigrp simelt (sh ip eigrp topology not worked for q-4 ,so had to answer using sh ip route)
–EIGRP Stub Sim
–EIGRP Evaluation Sim

@inqyuba
Thank very much for your input. Can you tell us which DND (drag and drop) you had? Are they in nneettworrkking file?

Passed today 06/11 with score of 9xx.

Lots of new questions. About 30% from 757q. Labs exactly the same as this site.

Labs were: ipv6 OSPF, EIGRP and EIGRP stub
D and Ds were: ipv6 nat sequence, NHRP and uRPF strict and loose mode.

My advice is study all questions is 757, including D and Ds.
Extra study IPv6 and EVN. Lots of questions on these

Good luck!

g o o . g l / R 8 J j 9 U

@Mosh @Yamen…
After reviewing the 750Q.. See below questions showed on my exam.

QUESTION 140
QUESTION 154
QUESTION 185
QUESTION 211
QUESTION 214
QUESTION 222
QUESTION 242
QUESTION 374
QUESTION 420
QUESTION 432
QUESTION 474
QUESTION 485
QUESTION 522
QUESTION 563
QUESTION 586
QUESTION 619
QUESTION 653
QUESTION 662
QUESTION 673
QUESTION 677
QUESTION 678
QUESTION 701
QUESTION 702
QUESTION 719
QUESTION 724
QUESTION 740

If you have the 195Q… please share. Still fresh in my mind..

@kaleem
Different answer in networkingg. and spoto dumps.

Q1. which snmp verification command shows the encryption and authentication protocols that are used in SNMPV3?
A. Show snmp group spoto answer
B show snmp user networking answer

ANSWER:
Here is the output of that command…
Router# show snmp user
authuser
User name: authuser
Engine ID: 00000009020000000C025808
storage-type: nonvolatile active access-list: 10
Rowstatus: active
Authentication Protocol: MD5
Privacy protocol: DES
Group name: VacmGroupName

Q2.Company is deploying multicast application must be accessible between sitesbut must not be accessible outside of the organization.?
a.FF02:/16 spoto
B.FF08:/16 Netttworking
which one right.?

ANSWER:
Both are multicast addresses, but the question states “accessible outside of the organization”

FF02 is for link-local multicast
FF08 is for organization local multicast

Could you guys help with the following 5 questions please?

QUESTION 552
which condition prevents the establishment of a DMPVN tunnel between two spokes ?
A. HSRP is enabled on the spoke devices
B. IPsec is enabled on the spoke devices
C. the two spokes are behind different PAT devices
D. the two spokes have different tunnel keepalive settings.
Correct Answer: D
Keepalives does not need to match, the tunnel key should match. So the answer should be C

QUESTION 675
A network engineer is enabling RIPng on a new customer link Under which configuration mode is RIPng enabled?
A. Global
B. Router
C. Interface
D. IPv6
Ans A or C

QUESTION 616
Which two causes of latency are true? (Choose two)
A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilizaion of a link
Correct Answer: CE or CD

QUESTION 711
On a Frame relay, we are unable to ping the remote router, how to solve the problem?
A. DLC is active
B. DLC is not active and deleted
C. Frame Relay map is configured
D. Need and ACL to allow PING
Correct Answer: C. Question ask about how to solve the problem so the ans may be C

QUESTION 737
Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol
Correct Answer: A? ip helper-address applied under interface config mode, the question ask about Global config mode. Ans Should be D
Could you guys help with the following 5 questions please?

QUESTION 552
which condition prevents the establishment of a DMPVN tunnel between two spokes ?
A. HSRP is enabled on the spoke devices
B. IPsec is enabled on the spoke devices
C. the two spokes are behind different PAT devices
D. the two spokes have different tunnel keepalive settings.
Correct Answer: D
Keepalives does not need to match, the tunnel key should match. So the answer should be C

QUESTION 675
A network engineer is enabling RIPng on a new customer link Under which configuration mode is RIPng enabled?
A. Global
B. Router
C. Interface
D. IPv6
Ans A or C

QUESTION 616
Which two causes of latency are true? (Choose two)
A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilizaion of a link
Correct Answer: CE or CD

QUESTION 711
On a Frame relay, we are unable to ping the remote router, how to solve the problem?
A. DLC is active
B. DLC is not active and deleted
C. Frame Relay map is configured
D. Need and ACL to allow PING
Correct Answer: C. Question ask about how to solve the problem so the ans may be C

QUESTION 737
Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?
A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protocol
Correct Answer: A? ip helper-address applied under interface config mode, the question ask about Global config mode. Ans Should be D

Free is a spammer. He is doing same thing on rstut. Be aware guys

@hhhh
Q552 C
Q675 C
Q616 CD
Q711 It is the Q710 in the networking, and the correct answer is B there, but I think your answer (C) is correct…
Q737 C

@Kaktus yes all D&D were from nneettworrkking file

Hi, @Kaktus, did u take exam already?

Keep spamming

hey @Kaktus or anyone could please give more info about this nneettworking dump, I just signed for the premium area but I’m kinda confused here. my test is in December.

@hamz
congratulation, and thanks a lot for all your detailed information.

@hamz
so how many question from 759q came up? grats.

Dear All please some one explain me why ?? in ospf sim they are use same network add for both routers.

Portland(config-router)#network 192.168.4.4 0.0.0.3 area 1

Amani(config-router)#network 192.168.4.4 0.0.0.3 area 1

OSPF please share your simulation dumps for ccnp route

There is a new Drag and Drop question regarding Stateful and Stateless NAT

@Kaktus Where is the new D&D? On my exam (05/11) the D&D were all new :( Frame new, NAT 64 new…

@Elvis87
I have no idea where it is. Few people mentioned that they encountered new D&D which is stateless/stateful NAT64.

You had all DND new? They were not even in nneettwwoorrking dump file with 750 questions?

No all my D&D seemed new… maybe only D&D NAT64 is on nneetwworking dump. I don’t remember well but it seems to me NAT64-support application Layer\NPTV6 translates 2001:1::/24\wellknow-support ipv6 prefix 64

On FRAME RELAY D&D I remember that was a choice on the left : NO ADDRESS. I didn’t find anyone like that in the dumps

Can someone send me the dump for new Question ..
Thank you in advanced
my email : boo_mcool(@)hotmail(.)com

i have postponed my exam because of change of question. can some one help me to get latest dumps or share me the new questions at mohammed.sameer2k13 at gmail dot com

@ Sam

can you explain me why ?? in ospf sim they are use same network add for both routers.

Portland(config-router)#network 192.168.4.4 0.0.0.3 area 1

Amani(config-router)#network 192.168.4.4 0.0.0.3 area 1

@OSpf sim
They are using the same network because their interfaces belong to the same network. It is required to establish adjacency

where can i get the latest dumbs with the new questions. ({email not allowed})

There are no latest dumps. Exam has new questions starting the beginning of this month.

i need the latest dumbs. please mail me at jermain.l(@)hotmail(.)com