Share your ROUTE v2.0 Experience

@MiCis

Can you please tell what labs did you get in exam ?

@ss

EIGRP OSPF Redistribution Sim
OSPF Sim
EIGRP Stub Sim

hello can someone send me pl a vail pdf dump ccnp route 300-101 on my email

hussein.kameh at gmail.com

@ SS
The IP for the ospf lab was 192.168.16.34/30

I nailed 300-101 nneettwwoorrkkiinngg is the way!!!!
OSPF/EIGRP Redistr, OSPF Stub and EIGRP Stub
Frame Relay, ACL,AAA, GRE Tunnel and uRPF
Aweeeee

can someone tell what DnD found in the exam?

thank you.

Olaka and Anonumous

page 229. you can see valid dumps. labs in this site.

Pass the exam last tues with a score of 966 , all questions are in networkinggggg dumps 195q

@BetlogMo; Thanks for informing! what the Labs? do you remember which ones?

@Jonathan , its Eigrp Stub, Redistribution and OSPF, all question are from 195q of networkinggg, just make sure you understand each and every question and you will do good in the exam.

I passed exam today Nneetworkimg dumps valid Thanks to Nneetwokingg and Digitaltut

@Ss which labs did you get ? & were the wording or the question different or not coz sometimes cisco does that to confuse people. Pls answer if you can. Congrats

@BetlogMo;
Thanks a lot! will do!

@BetlogMo, did you take the exam in the Philippines?

Passed today. Networking 195 questions are still valid. I had all the questions from 195 including D&D. Labs were redistribution and Eigrp Stub and also faced a new ospf lab that I didn’t see in Digitaltut.
Thanks Networking and Digitaltut for support. Good Luck !

Guys is it 195 questions or 775 questions?? I just want to make sure I have the right dump!!!

@Anonymous

I got the labs EIGRP Stub , Redistribution and OSPF, wording of question were changed and IPs and ospf area were different

I passed exam with score of 1000.

@kk
congratulations!
please share the dump you studied

195q

Hey guys, gonna have my exam in the next few days. Are the labs and dump in this site still valid?

@BetlogMo, did you take the exam in the Philippines? ….

Guys, I don’t see any lab in 195Q!
How many labs do we have, and where is it in the file?
Thanks

@MM

Please go through the following links
https://www.digitaltut.com/category/route-300-101/lab-sim
https://www.digitaltut.com/practice-real-route-labs-with-gns3#more-672

Does anyone take the exam in thw philippines lately?

Hello guys. Planning to take the exam here. How long do I need to study?

Hi all, What is the EIGRP Stub and OSPF Stub labs ?? If it is available on DigitalTut so please can anyone paste a link ? Thanks

link for last dump

EhabBooks .com/downloads/ccnp/ccnp_routing_2018_09_09_nneettwwoorrkkiinngg_dump.rar

27. Which two commands do you need to implement on a router to support pppoe client ?
A. peer default ip address pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
Aswers: B and E

28. Which two statements about NHRP in a DMVPN environment are true? (Choose two)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic

answer: D and E

29. In which scenario can asymmetric routing occur?
a. active/active firewall setup
b. single path in and out of the network
c. active/standby firewall setup
d. redundant routers running VRRP

answer: D ?

30. After reviewing the EVN configuration, a network administrator notices that a predefined EVN, which is known as “vnet global” was configured. What is the purpose of this EVN?
A. It defines the routing scope for each particular EVN edge interface.
B. It aggregates and carries all dot1q tagged traffic.
C. It refers to the global routing context and corresponds to the default RIB.
D. It safeguards the virtual network that is preconfigured to avoid mismatched routing instances
Answer: C

31. Which CLI command can you enter to permit or deny IPv6 traffic travelling through an interface?
A. access-list
B. access-group
C. ipv6 access-class
D. ipv6 traffic-filter
Answer: D

32. A network engineer executes the show ip cache flow command. Which two types of information are displayed in the report that is generated? (Choose 2)
A. top talkers
B. flow export statistics
C. flow sample for specific protocols
D. MLS flow traffic
E. IP packet distribution
Answer: CE

33. A network engineer needs to verify IP SLA operations on an interface that shows on indication of excessive traffic. Whixsch command should the engineer use to complete this action?
a. show frequency
b. show track
c. show reachability
d. show threshold

34. Which option is the minimum logging level that displays a log message when an ACL drops an incoming packet?
a. level 3
b. level 6
c. level 7
d. level 5

answer: b

34. Other than a working EIGRP configuration, which option must bes the same on all routers for EIGRP authentication key role over to work correctly?
A. SMTP
B. SNMP
C. Passwords
D. Time
Answer: Cz

Hi All

I have passed CCNP route 300-101 yesterday with 955.

Please Focus on 195q only. Prepare 5 labs from digitaltut.

I got 3 lab

Ospf – Stub
EIGRP – Stub cum route summarization
Redistribute lab

Hurry up and pass your exam.

Thanks to Networkkkinggg dumps 195q.!!

hi all, passed the exam and can confirm that all questions i had were from the 195q ones. Nothing from the old questions, so the 195 is enough to pass it. Labs: OSPF sim not IPv6 one, Eigrp Stub and Eigrp OSPF redistribution. D&D were the same as mentioned above. Good Luck, but don’t forget that you’ll need to understand the concepts as well.

the download file was corrupted or the file got password ?

EhabBooks .com/downloads/ccnp/ccnp_routing_2018_09_09_nneettwwoorrkkiinngg_dump.rar

I passed the exam since 30 minutes

All the questions were from those dumps (PDF + VCE Test Simulator)

drive.google.com/folderview?id=15LxO7JIEaIj_x6T14snLKbsI8J8RYkJQ

You can rely on those dumps to pass the exam

Thanks God

Please Guys some one send me nneettwwoorrkkiinngg_dump or tell me how to get it emad wais @ hotmail . com

Please Guys some one send me nneettwwoorrkkiinngg_dump or tell me how to get it emadwais @ hotmail . com

LIMA fuc_k_you
and fu_ck your shit dumb
ass_hole

@qali
in italian language
ma vaffanculo meda

hello guys
a girl who wants to pass ccnp!!
can u plz send me latest pdf to pass exam route 300-101

{email not allowed}
hotjessica1992 at gmail.com
thanks talk u

hello guys ,

just study only 195 or 700 dump?

thanks in advance

Passed the exam last week with a 9xx and the 195Q is still valid. Good luck and thanks to Networrrking for the study questions.

Hello all, i passed today the exam with a good mark (990/1000)
all the question were the same
I used PDF + VCE Test Simulator below (Updated on Oct 2018)

drive.google.com/open?id=15LxO7JIEaIj_x6T14snLKbsI8J8RYkJQ

You can rely on these dumps to pass the exam
The VCE Simulator is the same as the real exam !!
Good luck

Hello
195Q still valid. Work hard. Don’t try to remember the answers.
Thanks nneettwwoorrkkiinngg !!!
Good luck all

tomorrow is my day for exam
i renew my ccna and ccda certification if fail i stop networking life
:-(

195q means fist 195 questions. Or what plz clarify ??

VCE simulator 195Q

Thanks all, i passed today with 890. All in 195q

anyone can tell me where can i get VCE simulator 195Q?

lab it out, stub areas will not have summarized routes in their routing tables, the ABR suppresses the summary routes and put a default route in its place, the stubs will never know about summary routes, only the default route.

“OSPF doesn’t make a default route in the Normal and Backbonex area”,it might(internet access from ISP?), but it is not relevant to the question, but those 2 areas(normal & backbone) always receive summary routes – the question is about summary routes not default routes.

Just to clarify things a bit more, the ABR receives the summary routes, but will never pass them into a stub area(any type), it suppresses them and ixanjects a default route into the stub area. the ABR ignores the summarized routes anyway and puts all the routes in it’s routing table(lab it) and depending on the type of area it is attached it will send either the summary routes(normal or backbone) or a default route(stub areas). NSSA are a little different but they will not receive summary routes from other areas, only its own ASBR to be passed on to its ABR which is attached to the backbone and distributed from there.

The question doesn’t mention anything about LSA types, so don’t let that add to the confusion, only worry about what areas receive the summary routes, the ABRs translates for the areas and receives all LSAs. The routers inside the area only receive what the ABR sends it, depending on the type of area it is. They may receivesd a type 5 LSA (summary) but it does not contain summary routes, only a default, so they do not receive summary routes summary routes are replaced with a default route, so who cares what type of LSA it is for this question, are summary routes sent to it? No, they are blocked by the ABR.

The question: In which two area does OSPF send a summary route by default

But I just noticed that most of the Aug. question came from SPOTO. Anyway, what do you think of this?, this 2 questions are from nneettwwoorrkkiinngg.

 Isn’t this a same question?. If so, what would be the correct answer?

QUESTION 543
multicast application must be accessible between sites, but not be accessible outside of the organisation. Based on the scoping requirements, the multicast group address for the application will be allocated out of which range ?

A. FF00::/16
B. FF08::/16
C. FF02::/16
D. FF0E::/16
Correct Answer: B

QUESTION 694
Company is deploying a multicast applic ation that must be accessible between sites, but must not be accessible outside of the organization

A. FF00:/16
B. FFOE:/16
C. FF02:/16
D. FF08:/16
Correct Answer: C

——————————————————————————————————————————————————————————————————————————————————————————————

QUESTION 416
Which action can you take to mitigate unicast flooding in a network?
A. Configure VLANs to span multiple access-layer switches.
B. Implement a nonlooped network topology.
C. Set the ARP timer value to less than the CAM timer value.
D. Set the CAM timer value to less than the ARP timer value.
Correct Answer: C

QUESTION 690
How can you minimize unicast flooding in a network?
A. Configure HSRP on two routers, with one subnet preferred on the first router and a different subnet preferred on the second router.
B. Set the router’s ARP timeout value to be the same as the timeout value for Layer2 forwarding table entries.
C. Set the router’s ARP timeout value to greater than the timeout value for Layer 2 forwarding table entries.
D. Set the router’s ARP timeout value to less than timeout value for Layer 2 forwarding table entries

Correct Answer: B

———————————————————————————————————————————————————————————————————————————————————————————————-

JAJA August 29th, 2018
Noted on that @Hagar,

But I just noticed that most of the Aug. question came from SPOTO, that’s why I’m clarifying some of the questions . Anyway, what do you think of this?, this 2 questions are from nneettwwoorrkkiinngg .

 Q.543 and Q.694 is the same question?, the phrasing is just diff., If so, what would be the correct answer? . FF02::/16 or FF08::/16 ?

QUESTION 543
multicast application must be accessible between sites, but not be accessible outside of the organisation. Based on the scoping requirements, the multicast group address for the application will be allocated out of which range ?

A. FF00::/16
B. FF08::/16
C. FF02::/16
D. FF0E::/16
Correct Answer: B

QUESTION 694
Company is deploying a multicast applic ation that must be accessible between sites, but must not be accessible outside of the organization

A. FF00:/16
B. FFOE:/16
C. FF02:/16
D. FF08:/16
Correct Answer: C

———————————————————————————————————————————————————————————————————————————————————————————————————————-

 Q.416 and Q.690 is the same question?, the phrasing is just diff., If so, what would be the correct answer? .

QUESTION 416
Which action can you take to mitigate unicast flooding in a network?
A. Configure VLANs to span multiple access-layer switches.
B. Implement a nonlooped network topology.
C. Set the ARP timer value to less than the CAM timer value.
D. Set the CAM timer value to less than the ARP timer value.
Correct Answer: C

QUESTION 690
How can you minimize unicast flooding in a network?
A. Configure HSRP on two routers, with one subnet preferred on the first router and a different subnet preferred on the second router.
B. Set the router’s ARP timeout value to be the same as the timeout value for Layer2 forwarding table entries.
C. Set the router’s ARP timeout value to greater than the timeout value for Layer 2 forwarding table entries.
D. Set the router’s ARP timeout value to less than timeout value for Layer 2 forwarding table entries

Correct Answer: B

27. Which two commands do you need to implement on a router to support pppoe client ?
A. peer default ip address pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
Aswers: B and E

28. Which two statements about NHRP in a DMVPN environment are true? (Choose two)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic

answer: D and E

29. In which scenario can asymmetric routing occur?
a. active/active firewall setup
b. single path in and out of the network
c. active/standby firewall setup
d. redundant routers running VRRP

answer: D ?

30. After reviewing the EVN configuration, a network administrator notices that a predefined EVN, which is known as “vnet global” was configured. What is the purpose of this EVN?
A. It defines the routing scope for each particular caEVN edge interface.
B. It aggregates and carries all dot1q tagged traffic.
C. It refers to the global routing context and corresponds to the default RIB.
D. It safeguards the virtual network that is preconfigured to avoid mismatched routing instances
Answer: C

31. Which CLI command can you enter to permit or deny IPv6 traffic travelling through an interface?
A. access-list
B. access-group
C. ipvsca6 access-class
D. ipv6 traffic-filter
Answer: D

32. A network engineer executes the show ip cache flow command. Which two types of information are displayed in the report that is generated? (Choose 2)
A. top talkers
B. flow export statistics
C. flow sample for specific protocols
D. MLS flow traffic
E. IP packet distribution
Answer: CE

33. A network engineer needs to verify IP SLA operations on an interface that shows on indication of excessive traffic. Whixsch command should the engineer use to complete this action?
a. show frequency
b. show track
c. show reachability
d. show threshold

34. Which option is thasce minimum logging level that displays a log message when an ACL drops an incoming packet?
a. level 3
b. level 6
c. level 7
d. level 5

answer: b

34. Other than a working EIGRP conascfiguration, which option must bes the same on all routers for EIGRP authentication key role over to work correctly?
A. SMTP
B. SNMP
C. Passwords
D. Time
Answer: Cz