Share your ROUTE v2.0 Experience

Yesterday, I took the exam here in NYC and the networking 195q is 100% VALID!!!! The rest is only BS…
This is the time to take and pass the test. Good luck to everyone.

Guys,

the exam is very easy, 3 days studying 1hr each night , quick top up from this site latest Q&A , DND , Frame relay DND (Very basic….ie what is a PVC / SVC / LMI ) .

All the labs are still relevant (Still, over 9 years !!)

did the exam in under 20mins.

If you know your stuff (good grounding ) , you will be fine .

Are there any latest dumps after 09.09.2018. from networking. I’ve one but from last month don’t know if it still valid to pass.

Hello guys,
Will 195q be still valid next week ? I have my exam next wednesday. I will definitely update here. But what do you think ?

Passed too Alice by using it
975

Are the labs in the exam similar to the ones on this site in that, do you have to type the commands in exact or do you get a simulated CLI where you can tab out commands or use ? to shop options?

Hi guys

writing this Friday my exam i have been studying @nnnneeetttwwwooorrrkkkiiinnnggg dump with about 800q is it still valid or should i go with the 195q that he posted recently

Hi ALL!

EIGRP and OSPF Redistribution Lab

Can anyone tell me if the distance eigrp 90 105 is still needed even if the connection on R2 and R3 is serial link?.

Based on the note on the lab use distance eigrp 90 105 if the link between R2 and R3 is Fastethernet, what if the link is serial do i still need to use distance eigrp 90 105?.

Thank you.

I want to write ccnp route 300-101 exam tomorrow 4 oct .
195 Q still vaild or not ???

@Maro as of now the 195 is the updated dumps we have as of now.

Can you tell me whats your plan with EIGRP and OSPF redistribution lab?

Based on the note on the lab use distance eigrp 90 105 if the link between R2 and R3 is Fastethernet, what if the link is serial do i still need to use distance eigrp 90 105?.

@@

No. The path to R4 will be quicker going from R2 than having to go through R3 if the link between R2 – R3 is a serial link.

@Fox

Thank you fox ill try it later on gns3.

Hi Tikizia

how did you notice that 2000 on delay is not working or acceptable?.

Thank you.

@@@@ because did not accept the command, it gave me Invalid command or something so that I tried with 200 and it accepted it

i tried the eigrp / ospf redistribution now,

the route from R4 to R1 and route from R1 to R4 is different even i use Serial and Fastethernet on R2 and R3

from R4 > R3 > R2 > R1
from R1 > R2 > R4

Can anyone explain and help me? (this is without distance eigrp 90 105)

is it require to both R4 and R1 has a same link / path to traverse with?

@Tikizia
nneettwwoorrkkiinngg Dump with 800 Q or 760 Q ??

@Tikizia
Pls send me nneettwoorrkkinng dump 800 Q .
Hamada.eg44 at gmail dot com
I will Write the exam tomorrow…

Hi All! Please help if the only concern for the Redistribution of EIGRP and OSPF Lab is Route from R1 to R4?.
Thank you!.

Hi,

does anyone who take the exam recently? 195q is still valid? I’ll have my exam tomorrow. Please give me feedback if 195q and lab is still valid. thank you

I passed today Score 955 marks . Sure….nneettwoorrkkinng dump is still valid….

Lab, EIGRP Stub sim, OSPF sim , ospf eigrp redistribute sim .
D & D ( 195 Dumps ) uRPF . Other question is not sure . So I think 195 is still valid

Thanks….Digitaltut , nneettwoorrkkinng dump .

@John Smith

Congratulations John! did you study all the neeeetwoorrkking dump including the day 1-4+new questions? or did you study only the 195q?

maria del mare whore
king gay

I am about to give my exam in two weeks time , please share the latest dumps .
nneettwwrrookkiinnggg

Thank you Maria
Awesome dumps and materials

Hello Jimmy ,

Could you please share the dumps with me as well.

I am about to give my exam in the coming week.

maria is spammer

Hey dudes and duddettes ! What is the best document to study for the labs on the route exam? Thanks in advance

Which two statements about the enable secret and enable password commands are true? (Choose two)

A. I both commands are missing from the global configuration,vtp lines use the console password
B. The enable secret command overrides enable password
C. The enable password command has a stronger encryption algorithm than enable secret
D. The enable secret commmand is bac kwards-compatible with more version of IOS
E. The enable secret and enable password commands must be used togerher

Answer which ?? A and B or B and D

Please give me true answer

Hi ,
I passed the np route exam today from two hours ago
All the question from 195 Q dump
Lab : redistribution ,virtual link & eigrp stub

No one get 1000/1000 because there are many error answer in two topics … network principles & vpn technologies…..
They will not effect on your success , may be only two or three question on the exam

Good luck to every one

Hi Hamada can you please share me what did you do on redistribution

Ill promise you guys when i pass this exam i help others :) GL to all of us

Will be taking the exam first week of November. Is the nnnnetworking dumps and sim and labs here in digitaltut enough to pass?

@@@@
Like on the site

do you mean you only write what digitaltut said for the redistribution?.

Thank you hamada enjoy the rest of the year

you are an imbecile person
maria is a spammer
in its link there are no dumb
maria whore
carlos and everyone else like him are a_s_S_hole

regards
aaa

Hi ,
The pdf and vce dump &
The simulation with crack &
Labs

https://drive.google.com/file/d/1G8QRsk9Uo59g2sH9aamLPNp4GRUQLq3a/view?usp=drivesdk

Good luck

Hi Guys

I asked on Wednesday about which dump to study since i was writing today. I passed my exam with 8xx/1000

i got 3 labs
redistribution (with Fa interfaces), EIGRP Stub sim, OSPF Sim

i got like 6 DnD’s

53 questions in total.

beware when you memorise the DnD, they shuffle where you are suppose to your option so dont just memorise the order.

Beware on EIGRP Stub Sim, after my configurations i double checked my routing table and saw that the Stub Router was not updated with the Summarised Route. i did everything in terms injecting the corrected summarised route on the neighboring router and removing the receive-only under the Router eigrp sub command but it wouldnt update the routing table. i figured there was a glitch somewhere on Sim itself

I Hope this was helpful for someone out there.

i studied the nneeetttwwwooorrrkkkiiinnngg dump with about 800 questions. the 195q section of that dump was most relavant. the DnD were accurate too

Thank you

@Skrrreenshot
Thank you for your input, what DnD questions you had ? only from 195q ?

is there a legit person who can share dumps, my ccna is expiring next year need to study again.

I passed now !!!
all questions 195q
Labs:
EIGRP STUB
OSPF / EIGRP REDISTRIBUTION
VIRTUAL LINK IPV6

D & D:
FRAME-RELAY MULTIPOINT
COOP / MPP
LOOSE MODE / STRICT MODE

CRJ18 congrat,
i will pass the exam tomorrow, can you confirme to me that 195 is valid

@ABB

Ithink its still legit

Dear TUT

How can i contact with you to buy member account?

1 . When a router is unable to find a known route in the routing table,how dose it handle the pacet?
A.It sends the packet to the next hop address
B.It sends the packet to the gateway of last resort
C.It discards the packet
D.It sends the packet over the route with the best metric

2 . How can you disable DTP on a switch port?
A.Configure the switch port as a trunk.
B.Add an interface on the switch to a channel group.
C.Change the operational mode to static access
D.Change the administrative mode to access
3 . which statement about upgrading a cisco IOS device with TFTP server ?
A.the operation is performed in active mode
B.the operation is performed in unencrypted format
C.the operation is performed in passive mode
D.the cisco IOS device must be on the same LAN as the TFTP server
4 . It you change the weight and distance parameters on a device with an establshed BGP neighbor, which additional task must you perfom to allow the two devices to continue exchanging routes?
A.Reset the BGP connections on the device
B.Reset the gateway interface
C.Clear the IP routes on the device
D.Change the weight and distance settings on the other device to match

5 . For which two reasons might you choose chassis aggregation instead of stacking switches?(Choose two)
A.to allow hot-swapping modules
B.to increase the number of devices in use
C.to avoid the use of a centralized configuration manager
D.to avoid relying solely on Ethemet interfaces
Related to D&D I got only two :
1. TCP and UDP
2. Cable connection ( UTP cable connection between devices)its easy but not exist in the dumps
Related to LAB i got only one VLAN ( there was some modification but Same principle)
Related to SIM i got :
1.EIGRP TS
2.EIGRE GRE
3.OSPF neighbors TS
4.DHCP TS
5. Access list SIM
E.to increase the maximum port count

MI8

Which exam is it??? 300-101??

Whats the questions about stacking and dtp? may be its an switching questions>??
whats the sim??

which Future can mitigate fragmentation issues within network segment that are between Gre endpoints?

PMTUD/
TCP MSS
windowing
ICMP DF bit

Please help

@MINU

answer is B tcp mss

aaa but some questons told that the between device use PMTUD

Hello friends, on which page can i find the 159Q

hell friends on which page can i find the 195q ?