Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
@NP it did not take the command.
To anyone who done the labs on the exam, were you able to do
“Copy run start” ?
@JA
Neither did it take the “write” command ?
Which criterion does the BGP maximum path feature use for load balancing?.
A. Router ID
B. MED
C. Weight
D. Local Pref
is A or C, please help thank you
Hello All,
Please do Dumps from SPOTO, 91 questions from Prince and 447 question from a PDF that I found on Networktut.
For DND –
Virtual Circuit Message, Simple Flow control etc came
Reflexive, Extended, Standard , Time based DND came
LOOSE mode and Strict mode came
IPV6 Traffic filtering and IPV6 access class came
MSS,KEEPALVIE, mGRE came
Simulations –
1) Redistribution of OSPF and EIGRP where we have both were straight through or crossover Cables.
2) EIGRP STUB AND SUMMARIZATION
Questions –
1) Please do VRF questions (3 of them came)
2) There were 2 new BGP questions –
What is true about peer groups? (Choose two)
A. Optimize backdoor routes
B. If you change configuration then it effects all peers in the group
C. Peer groups can send soft updates to all
D. Updates can be sent with multicast
Answer: B C
3) There were 3 TCP/UDP port questions, i got them wrong, but one was –
Either a frewall betweeo the twi riuters ir ao ACL io the riuter is blickiog IP priticil oumber
47.
Another TCP question had something to do with PORT 521
4)Which feature or technology is supported by stateful NAT64 ?
Answer – VRF
5)Which of the following situations results in routing loops?
Answer – when you have multiple ports of redistribution.
NOTE – Do not sweat much on IPV6 questions,I wasted much time on it. Do Frame – Relay questions too.
@NP No it would not take the ” write” command
Real and effective, can be used as a reference, very effective, I hope to help you.
W w
w.cc iedumps.xyz/ccie_rs.php?ut m_source=bbs&utm_medium=bbs
please:
what are the two correct statements about enable secret and enable password command?
A. the enable password command has a strong encryption algorithm than enable secret
B. if both commands are missing from the global configuration, vty lines use the console password
C. the enable secret command is backwards compatible with more versions of IOS
D. the enable secret and enable password commands must be used together
E. the enable secret command overrides enable password
also this
pleaase
Which two statements are true about EVN? (Choose Two)
A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic
C. It can support up to 16 VNs
D. It uses rdistribution to share routers between VNs
E. It supports SSM only.
@Domino
Thankyou, Yes I passed yesterday afternoon with 898, nothing new to report :)
Hello Guys
Just to let you know, i passed the exam, labs from digital tut and 195q from network helped a lot
About the questions, there is several new ones, but if you guys study cisco material and test your knowledge using the dumps here it will be more than enough to pass
Thanks Digitaltut and Networking
@CCNP-2017
Congratulations
what were the labs that you got ?
at 27.09 I wrote the test -> pass
195 Question nettworrrrkkkkking are 100 % valid question…
Exactly the same questions, plus 5 Labs
Qurban you are fake and nobody is buying your crap please go away
Hi Guys,
I passed the exam with 950+ today
Details:
all the questions are from nneettwwoorrkkiinngg_v2.1.
Labs:
1.EIGRP OSPF Redistribution Sim.
Note: for EIGRP OSPF Redistribution Simulation, I completed all the configuration but ping from R1 to R4 did not work for me at all, and also I don’t see the R2 Routes AD is changing from 110 to 105. so I guess we will configure as per our plan and leave to cisco for evaluation… FYI, i spent around 30minutes to resolve all the issues to make ping work but no luck.
2. OSPF Sim – this is straight forward and PING works to test.
3. EIGRP Stub Sim – this is straight forward
Note: ip summary-address eigrp 123 10.2.0.0 255.255.0.0 will work. FYI, there won’t be any summary route 10.0.0.0/8 on R3.
VERY IMP: please try to save the configuration with “copy running-config startup-config, for sure and this command is working on some routers but not all of them. for sure “write mem” did not work for me.
DAD:
Virtual Circuit Message, Simple Flow control etc came
Reflexive, Extended, Standard , Time based DND came
LOOSE mode and Strict mode came
Final summary, all the questions are from from nneettwwoorrkkiinngg_v2.1. good luck Guys!!!
Hi nneettwwoorrkkiinngg,
I really appreciate your time and efforts to help us out. thanks again.
@nneettwwoorrkkiinngg can you please share t-shoot dumps?
Can you plz send latest dumps to adnandaudzai at gmail dot com many thanks
I passed ccnp route exam today with score 933. Question 195 are still valided, but I recommend , should study new question 124 and DND 28 .
PS big thanks nneettwwoorrkking .
Plz send me the vaild ccnp route 300-101dump
Hamada.eg44 at gmail dot com
Thanks alot
@GoodNews, does copy run start work in sims??
just passed my exam one hour ago. Got 911/1000. 195 questions dump is more than enough to pass + Labs in this site. Thank you so much nettworrrrkkkkking for your help. Is there any valid dump like nettworrrrkkkkking dump for CCNP Switching?
Thx in advance…
@ andrea i am asking same question as yours , please let me know if you know the answer
@Andrea & Mizo Congrats on passing your exams. If you lot are lookin for switching dumps. Check the Switch Website, there are couple of people sharing valid dumps.
use these in the mean time :)
https://www.dropbox.com/s/eqscmnitd6yamk6/300-115_IPHelper_Oct_2018.vce?dl=0
@Mosh
Yes. “copy running-config startup-config” is working for sure on some routers but not all of them.
Hello Everybody I will schedule CCNP Route 300-101 on tomorrow. Please could you tell me “nneettwwoorrkkiinngg_v2.1” is still valid or Not ??
Cleared the exam since few minutes.
Networking 195q 100% valid.
Got Redistribution, OSPF IPv6, Eigrp stub labs.
Not a single router accepted the copy run start command.
could you please send me the 195q to richard.dubeh @ gmail .com
is anyone here who take the CCNP route this day?
hi please send me Networking 195q questions {email not allowed}
KT , yes i will take ccnp route exam today
Esn, what is your reviewer? Or you will use the 195q of nnnetworking?
@ KT , yes my reviewer is nnnetworking dump
@ESN what time is your exam? Please let me know your score after the exam, i know you can pass it! And also if it is 100% questions coming from nnnneetworking dumps.
passed my exam one hour ago. Got 9xx/1000. 195 questions dump is valid + Labs in this site. Thank you so much nettworrrrkkkkking for your help
labs: EIGRP Stub Sim,IPv6 OSPF Virtual Link Sim, IPv6 OSPF Virtual Link Sim
D&D:COPP,GRE,AAA,Framerelay multi point
Good Luck for all
Passed exam today with 8xx.
Thanks nnetwork.dump 195q still valid 100%
Lab: EIGRP Stub,OSPFv3,Redistribute EIGRP & OSPF.
I tried many video & audio lectures for my preparation of ROUTE 300-101 exam but all was in vain, then I got 300-101 PDF from braindumpscerts.com, I prepare for my 300-101 exam with these question answers & passed my exam. Big thanks to the braindumpscerts team!
Which two causes of latency are true?
A. High bandwidth on a link
B. Split Horizon
C. Propagation Delay
D. Serialization Delay
E. Under-utilization of a link
Answer from dump says B&E…
Shouldn’t it be C and D? Can someone explain why please?
Many thanks in advance!
@CCNP_Penguin, i think the answe is C & E
Guys, how much is the exam pay for 300-101?
Same as 300-315 :)
Hi guys!
in labs in CCNP Route. the IP’s they use from EIGRP, OSPF SIM, PBR, ETC. are the same here ing LAB SIM in DIGITALTUT? for example in OSPF SIM, they use 192.168.4.5/30(PORTLAND router) its same IP’s or it will change when you take the exam? can someone answer me to this question especially who take the exam recently.
Read This. Ill go with C&D
http://www.preeminentech.com/latency-contribution-factors
Hi guys!
in labs in CCNP Route. the IP’s they use from EIGRP, OSPF SIM, PBR, ETC. are the same here ing LAB SIM in DIGITALTUT? for example in OSPF SIM, they use 192.168.4.5/30(PORTLAND router) its same IP’s or it will change when you take the exam? can someone answer me to this question especially who take the exam recently.
Hi all! Is there a difference between premium member and non-member? I thought everything was already provided in all the links on the right side of the page? I can see questions and also lab questions too. What’s the extra information that premium gives us?
Thanks.
Pass today , with score 966 , 195 dump very valid 100%
Labs : eigrup stub , ospf sim configuration , redistribution
DND :Acl types , stirct & loose , frame relay lmi
Is there anyone who has nneettwwoorrkkiinngg_v2.1 195q dumps ?
@ESN congrats! can i ask question? in the lab is the IP changes or still the same here?
@esn congrats! can i ask question? in the lab is the IP changes or still the same here?
im going to take the exam on oct 8.