Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
@CNP-2017
6 – A&D it’s wrong answer .. it’s c&d as totally stub accept default route as a summary route but not accept lsa summary , u can check it in ospf lab
QUESTION 638
What happends when unicast flood protection is triggered on a VLAN?
A. The VLAN is shut down
B. Traffic on the VLAN is load-balanced across multiple links
C. The VLAN is removed from the VLAN database
D. Traffic on the VLAN is passed to another VLAN with lower load
Correct Answer: D or A
Hi anyone,
Is this link correct about @nneettwwrrookkiinnggg dump or not?
https:// drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1
@Phob
Yes
https : //drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1
Passed my exam today with a score of 9xx. I got 3 labs (OSPF, EIGRP STUB, REDISTRIBUTION. All questions are from 195Q. 100% VALID!!!!
IMO you need to add “area nssa default-information-originate” command to inject default-route in nssa area, not by default. So correct answer should be C&D.
@j69roman
what drag and drops you had?
Just passed exam few hours ago …my score 944
Special thanks to nettworrrrkkkkking for sharing dumps and all people in comment section for correct answers..
Labs – redistribution , ospf , eigrp stub
All questions from 195 section
No new labs . Labs are same shared on this site
Just be careful for drag n drops options are not in same sequence
I have studied 195 + new questions tab but all questions and d&d in exam where from 195 sections only
All the best
don’t want to start another 2 page debate, but:
6.In which two areas does OSPF send a summary route by default ?
A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal
answer CD or DE – correct answers would be ABDE
A – gets Type 3 (contains Inter-area routes/summary)
B – gets Type 3 & Type 5
C – none – only default route (technically type 3, but it only contains a default route to its ABR)
D – gets Type 3 (contains Inter-area routes/summary and a default route to its ABR)
E – gets Type 3 & Type 5
Summary route is not the same as a default route.
So the question doesn’t make sense and is probably wrong, it should be something like:
“In which two areas does OSPF send a default route ?” or “In which two areas does OSPF send a default route in place of a summary ?”
Answers: CD
Has anyone got CCNP Routing and Switching ROUTE 300-101 Quick Reference?
Thank You
https://www.4shared.com/folder/CuivGa_D/Cisco_dumps.html
latest dumps, Please share the link with others as well. OR copy paste full message to help others.
pdf updated in july-august 2018.
I am not going to reply back to any comments.
Good luck.
@xaxa
Can you please remember Anything about the new Frame relay DaD ?
xaxa is a spammer lol
I passed
Nothing new, everything just as expected.
had 3 labs which you can find on this site (Just learn ALL of them, its not that hard)
195q from nneettwwrrookkiinnggg is valid – THANK YOU nneettwwrrookkiinnggg!!!!
And thank you Digitaltut!
congratulations!
I have my exam in the morning….
don’t want to start another 2 page debate, but:
6.In which two arxaeas does OSPF send a summary route by default ?
A. NSSA
B. Backbone
C. Totally stubby
D. Stuab
E. Normal
answer CD or DE – correct answers would be ABDE
A – gets Type 3 (contains Inter-area routes/summary)
B – gets Type 3 & Type 5
C – none – only default route (technically type 3, but it only contains a default route to its ABR)
D – gets Type 3 (contains Inter-area routes/summary and a default route to its ABR)
E – gets Type 3 & Type 5
Summary route is not the axsame as a default route.
So the question doesn’t make sense and is probably wrong, it should be something like:
“In which two areasax does OSPF send a default route ?” or “In which two areas does OSPF send a default route in place of a summary ?”
Answers: CD
Hi Networking,
IS THERE ANY UPDATED DUMP AFTER THE UPDATED ONE ON 09.09.2018 FROM NETWORKING.
PLEASE RESPOND….
No need to Update, dump from Networking ist 100% Valid.
@ccnp-2017
Good luck, if you know all labs and 195q you are safe!!!
dear Anonymous could you please send me the 195q to abbas.quraishi789 @ gmail .com
hi,
@ anonymous
i wiil write the exam in the next week
do you think this dump from Networking and 195q still valid to the next week 2/10/2018
??
thanks
I dont know – im not Cisco. :)
Either you risk it and learn just the 195q or you be safe and learn everything you can see on nneettwwrrookkiinnggg’s dumps and Digitaltut Premium. I recommend you Digitaltut Premium anyway because you can learn the labs so nice, fast and easy here without downloading or installing anything.
Back to topic: Cisco can always change the questions (either new ones or go back to old questions) and its basicly a mix of luck and how well you are prepared. You decide.
thank you
Which technology is required on an EVN trunk interface?
A. 802.1q
B. NAT
C. VRF-Lite
D. IS-IS
answer A or C
Im going A
“An EVN trunk is allowed on any interface that supports 802.1q encapsulation, such as Fast Ethernet, Gigabit Ethernet, and port channels.”
@network en
A
“An EVN trunk is allowed on any interface that supports 802.1q encapsulation, such as Fast Ethernet, Gigabit Ethernet, and port channels.”
“If an EVN trunk is configured on an interface, you cannot configure VRF-Lite on the same interface.”
cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book/evn-overview.html#GUID-82985EB8-6F7F-4E7F-AEEC-3012632889EE
hi
What is the primary service that is provided when you implement Cisco Easy Virtual Network?
A. It requires and enhances the use of VRF-Lite.
B. It reduces the need for common services separation.
C. It allows for traffic separation and improved network efficiency.
D. It introduces multi-VRF and label-prone network segmentation.
answer A or C
thanks
@network en
I’ve went back and forth on this one. I think I’d choose A. EVN is basically the “auto qos” of VRF-Lite that makes it easier to implement. I could see either being correct, honestly.
“EVN builds on the existing IP-based virtualization mechanism known as VRF-Lite. EVN provides enhancements in path isolation, simplified configuration and management, and improved shared service support. EVN is backward compatible with the VRF-Lite solution to enable seamless network migration from VRF-Lite to EVN.”
cisco.com/en/US/docs/ios-xml/ios/evn/configuration/15-1sg/evn-overview.html#GUID-93A58BBA-8EC7-47B8-AE69-43C083F53E0F
someone please send me 195q nnetworkking dumps on richard.dubeh at gmail dot com
For anyone that has taken the exam…
Are the labs at the start? at the end? or randomly mixed between questions?
In which state do DR and BDR establish adjacency with each ospf router in the network
A. Exstart State
B. Loading State
C. Exchange State
D. Init State
is it A or D? Thank you.
Here are the latest question banks, real and effective, guaranteed to pass the exam, you can go and see if you need.
W w w. cci
edumps .xyz/ccie_rs .php?utm_source=bbs&utm_medium=bbs
Got my exam last thing today!! :)
Has anyone passed this morning please? All still valid?
Has anyone got CCNP Routing and Switching ROUTE 300-101 Quick Reference?
Thank You!
please………
what are the correct answers for:
1- which condition prevents the establishment of a DMPVN tunnel between two spokes ?
A. HSRP is enabled on the spoke devices
B. IPsec is enabled on the spoke devices
C. the two spokes are behind different PAT devices
D. the two spokes have different tunnel keepalive settings.
2- Which two statements about ICMP unreachable messages are true?(Choose two
A. They are sent when a route to the destination is missing from the routing table
B. They can be enable and disable on a device only on a global level
C. They are sent when a destination address responds to an ARP request
D. They include the entire packet so that the source can identify the process that generated the message
E. They include a poriton of the original data so that the source can identify the process that generated the message
@ MAI
1- C
2- AC
@network en
thank you.
@MAI @network en..
2. a and e
The ICMP destination unreachable message is generated by a router to inform the source host that the destination unicast address is unreachable.
The IP header plus the first 8 bytes of the original datagram’s data is returned to the sender.
@LA
A
There are no DR/BDRs at the Init state, so D is out. The DR/BDR are elected at the 2-way state. Exchange is each router deciding on who sends the DBD first to it’s neighbor. In a multi-access network (ethernet), this would be the DR/BDR with each neighbor.
cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html
@CCNP-2017
thanks
many different answers in dumps
@FOX
Thank you.
I also choose Exstart than Init state based on the dumps.
Thankyou.
I hope everything went well @CCNP-2017.
I will be taking the exam sometime late October or November.
Which two statements about ICMP unreachable messages are true?(Choose two
A. They are sent when a route to the destination is missing from the routing table
B. They can be enable and disable on a device only on a global level
C. They are sent when a destination address responds to an ARP request
D. They include the entire packet so that the source can identify the process that generated the message
E. They include a poriton of the original data so that the source can identify the process that generated the message
is it A – E
it will only send unreachable message when the arp request has no reply to the host/device
I have passed CCNP Route on 20th of This month. But its still no included in certificate tracking system. So I can order soft copy. How much time its need to add in tracking system. ?
Hello guys, I just passed my exam today i got 9xx, 195q dump is valid in Mexico,
Thank you @nneettwwoorrkkiinngg!!!!
I got Labs Eigrp stub, OSPF sim and EIGRP OSPF redistribution. All questions and dnds came from 195q
Here is the link for the @nneettwwoorrkkiinngg dump, just remove the spaces.
https:// drive . google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1
Good Luck Everyone!
I just finished my route exam, i did not pass. not sure what happened. I got all the questions from 195q
@ JA
So you are saying that the 195q were what you got ? but you still failed?
were you able to do all the labs correctly? what labs did you get?
sorry to hear that JA.
Did you manage to do the labs ok?
were they at at random places in the exam or all at the end?
which labs did you get?
The labs were random the first lab was the second question. Which was the EIGRP stub lab but for what reason i could not get the 10.2.x.x summazied. I got two networks 10.2.0.0/ 16 10.2.0.0/24
I got the following OSPF IPV6, EIGRP Stub,and Redistribution.
@JA
Sorry to hear that.
Did you forget to apply copy run start at the end of your configuration?
Did you get any new question out of the 195q ?
@JA it did not take the command.