Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
“procyber 1.5 is changed on 2nd dec… with 25 more new questions” please any one knows , confirm this , my exam is in 2 days ….
To many fake links. No one is falling for that google-drive link. Jesus
@SecureGoon75 what do you need ?
need latest update dumps for this month pls? anyone
@Manny
I appreciate for the heads up.
I wanted these bumps to take this test haha.
@SecureGoon75i have the 1st of Nov. update but it might be useless if there is really a new december update …
dumps*
Do you have a dropbox link?
Thank you!
needed latest dumps.
email address
{email not allowed}
already digitaltut member
email address is
hemlunchid @ yahoo.co.in
I wish they had private msg abilities
Seriously I am confused now as getting it difficult to find out which are fake or genuine dumps…! please help me out anyone.
A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF adjacencies come up. Which two actions are possible solutions for this issue? (Choose Two.)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites.
Answer: AC or AD
which one is correct
Passed today 895, Zero new question absolute no new question, all questions came from Procyber VCE only.
Lab OSPF, EIGRP Eval, OSPF lab Redistribution and PBR, Pay attention the question the MCQ they changed the order and it’s confusing, a lot of ENV and IPv6 question.
@SecureGoon75
if i installed dropbox , i will upload it and comment the link here
@Lunchi
i will email you
@Crazy
Congrads. man !!!
i had about 15 new question and i failed …
please I need questions (digitaltut) . I do not see question
If I am member in digitaltut I will see questions
Why do not the exam passers share the dump. They just say they passed. Is it so hard to share? All posts are spam content. They’re all trying to sell a mercenary dump. Could it send a PERSON who can send the current dump? ufukozgenyildiz [at] gmail [dot] com
@pentasec: but you said that procyber ist gut
@pentasec: but you said that procyber is good
@Most and the rest
21.How does an EVN provide end-to-end virtualization
a. It tags traffic with an 802.1q at the edge interface
b. it tags traffic with an 802.1q at the trunk interface
c. it tags traffic with a virtual network tag at the edge interface
d. it tags traffic with a virtual network tag at the trunk interface
Answer : C
Should answer be D not c
???
Hey all. I am going through the labs right now and I am not seeing GNS labs for all the sims on the exam and I would like to practice everything before the exam I have next week. Is there a link anyone has for GNS or even PacketTracer sims for IPv6 OSPF / EIGRP Stub / PBR? I see the other sims on this site already …thanks
@Johnny configure it yourself its better than anything
ok this is the dropbox link of the procyber v1.5 , Nov. 1st update , with 446 q ,,,, https://www.dropbox.com/s/bg8scdv3g44nxkg/300-101-ROUTEv1.5%20%28updated%20by%20procyber%2001.11.2017%29.vce?dl=0
and the link of the vce player that plays the dump correctly and shows the answers ,,,, https://www.dropbox.com/s/9fhtlzteovtlql5/VCE-v1.0.2.rar?dl=0
but i still hope if anyone has an idea about new dec. update to the dump ,, please inform us before i retake the exam ….
@pentacis
I’ve seen people talking about this updated version but i was not able to find it…
i took the exam 8th december and all the questions / DnD / Lab were in the Procyber v1.5 nov 1st update
good luck !
May I know if is there any way to download jeff doyle’s Routing TCP/IP volume 1 and 2 2nd edition?Thank you
@Ith
Hey can you let me know how many questions does this exam have? What’s the passing score?
I’ve been reading the Offical Certification Guide and practicing with Procyber version Nov 1 dumps, also DnD and Labs from digitaltut.
I’m a bit worried since my exam is on December 18th, I only got mastered around 200 questions and my head can’t process any more Info.
Any advices you or anyone can give me?
Your help is very much appreciated.
Thank you all.
Is this dump still valid? It has 449 questions
VCEv1.4 link: https://drive.google.com/open?id=0BxQV8_fCv60eb1JNSVhYb2JxczQ
(scammers please don’t waste your time replying, we are not idiots)
@Ith
i took the exam in 6th of Dec. ,, depending on passleader 477q and failed
now i’ve completed procyber 1.5 and planning to retake the exam this week …
@December. you are an idiot yourself!
@ Anton
In my opinion answer D is correct. I agree with you. Only between 2 routers (trunk interface) we need to tag with VN tag (in fact after applying VNET trunk you will see creation of sub-interfaces with tag ID), between switch and router (edge interface) however we would use 802.1Q.
Also there was some confusion with the following question:
14.In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
The only possible answer is ‘D’, NOT ‘A’ as most say.
The reason behind it is related to return traffic path in redundant topology (FHRP) where traffic is send out via active FHRP SW/R and then return traffic from Core switch is equally load balanced to both active/master and standby/backup SW/R causing inactive one to flood this unknown unicast traffic out all its other ports (unknown because initial traffic went through active so the second one never learnt ARP). This may occur in certain topology (core equally load balanced to FHRP, also on access switches same VLANs spanned)
Cisco recommends that you do not span a VLAN across more than one access layer
switch to avoid such an issue. However, if a particular design requires the spanning of
a VLAN across multiple access layer switches, the best-practice recommendation from
Cisco is that you adjust the FHRP device’s ARP timer to be equal to or less than the
Content Addressable Memory (CAM) aging time.
@friends
Is procyber1.5 has added questions as per some posts. I don’t think so
But if anyone thinks new updates please post here
As for EVN I think it tagged on trunk interfaces with EVN tag
On customer facing interfaces it is similar to vrf lite with “ip vrf forwarding” command
MMMexpert
Ok found the Procyber v1.5 vce version which has some changes from the 1.4 version, its on page 200 (Beware of the the scam posters)
https://www.digitaltut.com/share-your-route-v2-0-experience/comment-page-200
@All
Can anyone share here the new questions or can someone please add them to the file? also , can anyone here please provide some tips for the labs and sims? what to watch out in the tests? i noticed a lot of who went to the tests wrote to look out at the AS numbers and the IP numbers. why? can someone please explain?
Joe.
What’s the answer to this question. Once again I’ve reading conflicting information.
Which two options are limitations of stateful NAT64
A. It is unable to route VRF traffic
B. It is unable to route multicast traffic
C. It supports FTP traffic only with a ALG
D. It supports DNS64 only
E. Layer 4 supports TCP only
Which two statements about EVN are true? Choose 2
A. VRF using MPLS require a trunk interface that used EVN
B. VRF-Lite requires a trunk interface that uses EVN
C. All EVNs within a trunk interface can share the same IP Infrastructure
D. Each EVN within a trunk interface must be configured separately
E. Command that are specified once under a trunk interface can be inherited by all EVNs
Please explain this question
@Mac, when did you do the exam or when you are gonna do it?
that is the first time i hear about these questions
Passed ROUTE this weekend. Learn 100% of this site and you’ll be fine.
Guys pay the $12 and become a premium member it is worth it. You don’t want to waste $300 failing the exam. The premium access is worth it!! I got P4S just to be sure on top of this and it was a waste. I missed an entire lab and still passed although barely. Sign up !
can anyone kinky answer the questions that @MAC posted
regards,
*kindly
@Manny, which lab did you miss and why?
@ Manny
you have P4S latest full dump?
please send me
udaralh @ gmail . com (remove space)
Hi guys, i want to know how many D&D are going to show in the exam and how hard they are and the most common ones?
Best regards,