Share your ROUTE v2.0 Experience

Hello nneettwwrrookkiinnggg

As per question 630. I think answer should be D instead:

A network engineer wants to monitor hop-by-hop response time on the network. Which IP SLA operation accomplishes this task?

A. UDP echo
B. ICMP echo
C. ICMP path echo
D. ICMP path jitter

Explanation:

The operation first discovers the hop-by-hop IP route from the source to the destination using a traceroute utility, and then uses ICMP echoes to determine the response times, packet loss and approximate jitter values for each hop along the path.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipsla/configuration/15-mt/sla-15-mt-book/sla_icmp_pathjitter.html

Hi @nneettwwrrookkiinnggg, can I have your link on where to download the dumps you make? I use a link to download your latest version but the wrong answers are still there. Thank you very much!

QUESTION 688
Which condition must be met before you can configure SSH on a device running Cisco IOS?
A. The device must have an auxilary port.
B. The device must have a modem connection.
C. The IOS must be a crypto in
D. Telnet must be disabled on the device
Correct Answer: C

I don’t konw if C is correct. I think it’s D . please verify

Hi! Will be taking exam in a few minutes. 🙏🙏🙏

@nneettwwrrookkiinngg
is there is necessary to real dumps of all section ? or Aug/Sep sections is enough to go through

Q677
anyone can answer with proof?

QUESTION 678
Which two statements about ICMP unreachable messages are true?(Choose two
A. They are sent when a route to the destination is missing from the routing table
B. They can be enable and disable on a device only on a global level
C. They are sent when a destination address responds to an ARP request
D. They include the entire packet so that the source can identify the process that generated the message
E. They include a poriton of the original data so that the source can identify the process that generated the message

HI @acme
could you please contact me through this email
ashlaby at hotmail dot com

Hey, Can anyone find proof to the question below. I don’t know if it’s correct

What happends when unicast flood protection is triggered on a VLAN?
A. The VLAN is shut down
B. Traffic on the VLAN is load-balanced across multiple links
C. The VLAN is removed from the VLAN database
D. Traffic on the VLAN is passed to another VLAN with lower load
Correct Answer: D

@nnetworking,

For the question below, I think the answer is A instead of D.

QUESTION 639
What happends when unicast flood protection is triggered on a VLAN?
A. The VLAN is shut down
B. Traffic on the VLAN is load-balanced across multiple links
C. The VLAN is removed from the VLAN database
D. Traffic on the VLAN is passed to another VLAN with lower load

“Most switches implement no special command to detect flooding. Catalyst 6500/6000 Supervisor Engine 2 and higher series switches running Cisco IOS System software (Native) version 12.1(14)E and higher or Cisco CatOS system software version 7.5 or higher implements ‘unicast flood protection’ feature. In short, this feature allows the switch to monitor the amount of unicast flooding per VLAN and take specified action if flooding exceeds specified amount. Actions can be to syslog, limit or shutdown VLAN – the syslog being the most useful for flood detection. When flooding exceeds the configured rate and the action configured is syslog, a message similar to the following will be printed”

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6000-series-switches/23563-143.html

Any one planning to write exam this week or next week.Am planning for next week

hype_cisco@any update?

@nnetworking

Starting my preparation from today with Sep-195 questions,believing those questions are still valid .

what about 756 questions in the PDF?

@nneettwwrrookkiinnggg
Can u please post your latest updated dump?
because I have found a lot of versions and I am confused which should I study!

And thank u in advance!

@nneettwwrrookkiinnggg
your last link I have found, isn’t valid anymore,

Can you please post it again?

Thanks again!

Gents
where can i find update Route 300-101 Dump i plan to get exam on 18/09/2018 .
already i check more than 50th google drive links but all are fake

plz plz advise me
plz

Gents
where can i find update Route 300-101 Dump i plan to get exam on 18/09/2018 .
already i checked more than 50th google drive links but all are fake

plz plz advise me
plz

Go with this link
drive.google.com/drive/u/0/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

andy@you have to remove the space after https then it will work
Go with above google drive link

Ariana {email not allowed}p….

Ariana Molak @ fake

QUESTION 70
The following configuration is applied to a router at a branch site:
ipv6 dhcp pool dhcp-pool
dns-server 2001:DB8:1:B::1
dns-server 2001:DB8:3:307C::42
domain-name example.com
!
If IPv6 is configured with default settings on all interfaces on the router, which two dynamic IPv6 addressing mechanisms could you use on end hosts to provide end-to-end
connectivity? (Choose two)
A. EUl-64
B. SLAAC
C. DHCPv6
D. BOOTP
Correct Answer: AB
——————————————–
can some one explain me why A an B and why not C

@nneettwwrrookkiinnggg

For the question 736 the answer is “ip dhcp relay”? Because “ip helper-address” is entered in the interface mode configuration.

@Anonymous
yeah, u r totally right, I didn’t notice it))) thanks a lot!!

QUESTION 462
What is the function of the snmp-server enable traps and snmp-server host 192.168.1.3 trap version 1c public commands?
A. to allow only 192.168.1.3 to access the system using the community-string public
B. to allow private communications between the router and the host.
C. to collect information about the system on a network management server
D. to disable all SNMP informs that are on the system
Correct Answer: C

correct answer is A
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-4_3g_JA/configuration/guide/ios1243gjaconfigguide/s43snmp.pdf

QUESTION 475
Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working , what is the reason of this problem? (Choose
Two)
A. area Id match
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
E. MTU mismatch
Correct Answer: AD
I think it should be BD

QUESTION 531
Which command configure a default authentication list that uses a local database and a case-insensitive username ?
A. aaa authentication exec CONSOLE group local-case if authenticated
B. aaa authentication login CONSOLE group local
C. aaa authentication login default group local
D. aaa authentication exec default group local-case
Correct Answer: C
The answer should be D

Hi all
fyi

https: // drive.google.com/drive/u/0/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

QUESTION 638
Which criterion does the BGP maximum paths feature use for load balancing?
A. MED
B. local preference
C. weight
D. router ID
Correct Answer: C

why weight ? can some one explain me?

@nneettwwrrookkiinnggg
it is different with the dump that you have provided? we have to pay for that?

@Fereshte

Latest networking response is actually the same dude who posted as Ariana Molak.

That retard is just looking for easy money. Ignore him.

Hi All
this user is FAKE
——————————————————————————
nneettwwrrookkiinnggg September 4th, 2018
drive.google.com/folderview?id=15LxO7JIEaIj_x6T14snLKbsI8J8RYkJQ

Latest nneettwwrrookkiinnggg Version V9.0
——————————————————————————

@nneettwwrrookkiinnggg
When your dumps say Networking – valid -September= 195, does that mean the first 195 questions in the doc are valid for September?

@Anonymous

contact with me

nneettwwoorrkkiinngg @ gmail.com

@nneettwwrrookkiinnggg Do you have pdf of all 4 ebooks of how to master ccna, ccnp route, switch, tshoot? I downloaded your copy of route. Thanks for that.

Nobody responded to me about the free VCE or Crack. Guess what? You dont need it. You can use A+ VCE silver on Andriod. You can use BlueStack on windows by downloading this link https://www.bluestacks.com/download.html#download

BlueStack is a Andriod emulator for windows.

YAAAAH!

Free alternative to VCE using A+ VCE silver. Download Bluestack on your windows machine and then download A+ VCE Silver. You will not be disappointed.

Can someone please confirm that all you need is the 195 questions on August from nneettwwrrookkiinnggg dumps? Thanks

Hi @nneettwwrrookkiinngg, I don´t understand, the VCE file have 195 questions valid but the PDF document have 763 questions. Please clarify that. Thanks for your support.

network4life – Do you have materials for switching? Please anyone can help me with the latest exam on CCNP switching. Thanks a lot

Thanks to networking * 2
I passed exam today. score is 95x.
I think almost Eaxm Qs are in Valid September section.

@nneettwwrrookkiinngg

Q630
How big is the smallest packet than will always be fragmented on a standart Ethernet network with default configuration?
A. 1500 bytes
B. 1800 bytes
C. 2048 bytes
D. 2100 bytes

answer A according to the explanation given

I think the answer should be B because they’re asking which is the smallest packet that would be fragmented and a 1500Bytes wouldn’t be fragmented

For those that pass today.

please share the lab and DnD that are been tested

I examined various audio lectures & video lectures for the preparation of 300-101 exam but that all was in petty. Then I got 300-101 dumps PDF on braindumpscerts.com with this study material I passed the exam. The biggest advantage is a 100 % success rate. Practice questions format & worth of content is fabulous. I got 92% marks. Thanks to braindumpscerts

@nneettwwrrookkiinnggg,

I have seen your work regarding the questions in exam 300-101 and its great. Thanks for doing this. One more thin if you could do will be even greater and its the LABs. Could you please add that if you can and have time.

Thanks again

@cloud_network
Default MTU size 1500
1500 + fragmented 300 = 1800

Correct Answer is B

@nick!
Congratulations bro:)
You’re Welcome

@nneettwwoorrkkiinngg
Could you please answer my questions?

@nneettwwoorrkkiinngg,

Any info about the LABs?

Hi:) for me and I think for you. there are nice free ccnp route lessons. you can also check them.
https://ipcisco.com/ccnp-route/
enjoy…

Alhamdulillah, finally passed with 922 score after 4 months of preparing,
Networking dumb is so big, but it is valid 100%, no one question come from outside, but some answers are wrong that’s why I got this score

Thanks @networking and all