Share your ROUTE v2.0 Experience

does anyone know how to open the nneettwwokking VCE on a mac os?
I am only able to view 5 questions…

please help thanks

which is the correct answer for the question below:

QUESTION 555
which condition prevents the establishment of a DMPVN tunnel between two spokes ?
A. HSRP is enabled on the spoke devices
B. IPsec is enabled on the spoke devices
C. the two spokes are behind different PAT devices
D. the two spokes have different tunnel keepalive settings.

Hi nneettwwoorrkkiinngg/All,

Could you please share with me the simlets you have and what version of GNS3 you are using.

I have followed the instructions on digitaltut to use GNS3-0.8.3.1-all-in-one but I still can’t open some of the labs. I amstill getting lot of errors.

Hope I can get a response from you guys.

You can send it to JAJAJA9122 @ gmail . com

Many thanks,
JAJA

@CCNP_2017
Please email me at networkinggnikrowten at gmail . com

@nneettwwoorrkkiinngg,
@Ahmed,
@Delwans

Thanks for all of your helping for this exam.

I just passed the exam above 95x score.
All question have come from 710.
Some of the questions are not correct until now for new version even I researched a lot of answers.

N@@ungMM

Congratulation Bro . Best of luck for your future .

lab were correct same as here ?

@networkkkkkkking

Check below question is the same you wrote in your file 3 time and one of them answer is different please update only once with correct answer .

configuration change can be applied simultaneously to all peers in the peer group
Each neighbor in a peer group can have different inbound BGP policies

QUESTION 547
What are the two benefits of BGP peer groups
A. support groups of paths
B. A configuration change can be applied simultaneously to all peers in the peer group
C. optimize backdoor routes
D. updated via multicast
E. each neighbour in a peer group can have different inbound BGP Policies
F. they use soft updates to minimize bandwidth consumption
Correct Answer: BF
Section: Networking – NEW Questions

QUESTION 642
Which two options are benefits of BGP peer groups?(Choose two)
A. A Configuration change can be applied simultaneously to all peers in the peer group
B. They cam optimize backbone routers
C. They can be updated via multicast
D. Each neighbor in a peer group can have different inbound BGP policies
E. The use soft update to minimize bandwidth consumption
F. They support groups of paths
Correct Answer: AD

QUESTION 652
Which two options are benefits of BGP peer groups?(Choose two)
A. They can optimize backdoor routes
B. They support groups of paths
C. A configuration change can be applied simultaneously to all peers in the peer group
D. Each neighbor in a peer group can have different inbound BGP policies
E. They can be updated via multicast
F. They use soft updates to minimize bandwidth consumption
Correct Answer: CD

Q761
What show command is used here?

TCB Local Address Foreign Address (state)
6523A4FC 10.1.25.3.11000 10.1.25.3.23 ESTAB
65239A84 10.1.25.3.23 10.1.25.3.11000 ESTAB
653FCBBC *.1723 *.* LISTEN

A. show tcp brief
B. show tcp brief all
C. show tcp brief numeric
D. show tcp brief ip

Ans: B

Take note of the last line with the word LISTEN. In order to get the LISTEN state, you must enter the command sh tcp br all. There is nothing like sh tcp brief numeric in any version of Cisco IOS.

Reference:the output below is from my WAN Edge (Cisco ASR 1006) in production ( I have removed the actual IP addresses)
#show tcp brief ?
all All end-points (even listeners)
numeric Numeric Display
| Output modifiers

#show tcp brief all
TCB Local Address Foreign Address (state)
7F1B2850B168 x.x.x.x x.x.x.x ESTAB
7F1B28DD40F0 x.x.x.x x.x.x.x LASTACK
7F1B26D0E7D8 x.x.x.x x.x.x.x* LISTEN

#show tcp brief
TCB Local Address Foreign Address (state)
7F1B2850B168 x.x.x.x x.x.x.x ESTAB
7F1B28DD40F0 x.x.x.x x.x.x.x LASTACK

sh tcp br command does not show the LISTEN state

@Ahmed
I agree with you. Q761 the correct answer is “show tcp brief all”
I have checked in Cisco 7609 and Cisco 10K. Both the result are the same, the command to show LISTEN part is “show tcp brief all” NOT “show tcp brief numeric”

CISCO7609#sh tcp brief all
TCB Local Address Foreign Address (state)
2716B590 XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX.33198 ESTAB
2A0FCD20 XXX.XXX.XXX.XXX.179 XXX.XXX.XXX.XXX.27377 ESTAB
1D068008 0.0.0.0.179 XXX.XXX.XXX.XXX.* LISTEN
1D067400 0.0.0.0.179 XXX.XXX.XXX.XXX.* LISTEN
1D061FC8 0.0.0.0.179 XXX.XXX.XXX.XXX.* LISTEN

Hi All,

Passed today with 95X

Labs: EIGRP stub, Ipv6 OSPFv3, Redistribution

Dumps shared by nneettwwoorrkkiinngg are very much valid.

Once you go through concepts, Just go through all the labs and latest dump shared by nneettwwoorrkkiinngg. You are good to go.

Digitaltut, Please update the website with new questions. There were lot of questions that are not in the site but present in the dump shared by nneettwwoorrkkiinngg.

@CCNPRoute,

Could you share with me the simlets you used? and the version of the GNS you used?, pls include the IOS you had used.

Please send it to JAJAJA9122 @ gmail . com

Many thanks to you

Hi All,

Could you please share with me the simlets you have and what version of GNS3 you are using.

I have followed the instructions on digitaltut to use GNS3-0.8.3.1-all-in-one but I still can’t open some of the labs. I am still getting lot of errors.

Hope I can get a response from you guys.

You can send it to JAJAJA9122 @ gmail . com

Many thanks,
JAJA

Hello guyz thanks for sharing,
can you confirm and explain this:
QUESTION 643
Which criterion does the BGP maximum paths feature use for load balancing?
A. MED
B. local preference
C. weight
D. router ID

for me it is D. because attributes have to match to be able to loadbalance

Hello guyz
can not make any sense of the frame relay DND
Question 646 – R1 S0 multipoint connection

what do you think of this:
interface Serial0 => A
no ip address
encapsulation frame-relay => B
frame-relay encapsulation-type ansi
interface Serial0.1 multipoint =>C
ip address x.x.x.x 255.255.255.0
frame-relay interface-dlci 100 =>D

https://www.cisco.com/c/en/us/td/docs/ios/12_2/wan/configuration/guide/fwan_c/wcffrely.html#wp1003106

What do you think?

QUESTION 672
Which location within the network is preferred when using a dedicated route for Cisco IP SLA operations?
A. user edge
B. provider edge
C. access edge
D. distribution edge
Correct Answer: D

The correct answer is B – provider edge
Reference:
Dedicated routers are most appropriate when the deployment plan calls for the operations to be sourced from the edge of the core network (ie: Provider Edge [PE]) location in a Service Provider network. The Cisco 1700, 1800, 2600, 2800, 3600, 3700, 3800 and 7200 Series Routers are frequently used as dedicated routers.

https://www.cisco.com/en/US/technologies/tk648/tk362/tk920/technologies_white_paper0900aecd8017f8c9.html

In the networking VCE which one is the correct answer: the green one or the “Correct Answer” one. Because they are differents and normally the green and the correct one have to match…

Im writing tomorrow.. Goodluck to me, will advise after.
Studying neetworrk 1.1 and 2.1

what is the answer for Q620

“which two causes of latency are true?”

A High BW on a link
B Split Horizon
C Prop Delay
D Serial Delay
E Under-Utilization of a link

Answer says CE but there is a comment saying “correct answer is BE”

@CCNP_2017
Please email me at networkinggnikrowten at gmail . com

Sent..

@WritingTuesday Best of Luck to you! Please do come back and update.

somebody has to be running vce on a Mac OS. anybody can share a link for a vce player with a crack code?
I can only see 5 questions from nneettwwookrinnggg vce if i use a vce player.

thank you

Just passed the exam (92X)

I had only one new question :)

Thanks @nneettwwoorrkkiinngg for the work…. I hope our research helped you a little bit… Keep moving, you are a great guy!!!

See you in Switching and TS guys

@Ahmed

Q761
What show command is used here?

TCB Local Address Foreign Address (state)
6523A4FC 10.1.25.3.11000 10Z.1.25.3.23 ESTAB
65239A84 10.1.25.3.23 10.1.25.3.11000 ESTAB
653FCBBC *.1723 *.* LISTEN

This example is taken from (literally the same IPs):
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp/command/iap-cr-book/iap-s3.html#wp4294670608

and this output is from “show tcp brief numeric”.

@nneettwwoorrkkiinngg Great job man. keep updating the file. I am studying for my exam. I will take it next month.

@CCNPRoute congratulations bro :)
please contact with me (nneettwwoorrkkiinngg @ gmail .com)

@N@@ungMM congratulations :)

@Delwans congratulations :)

Do we really need to memorize the 750 questions? Or exist a updated file with the most recent questions?

Guys just a quick one… On the exam, do we configure both Cases 1&2 on this case lab or us there something tht says configure case 2 over 1?

Honestly, networkkkkkking you would organize this question by category correctly. You dump can be correct but I seeing that many questions is loss between DAY X, Questions August and New Questions?

You use Skype? I can help you to organize dump correctly.

what is the answer for Q620

“which two causes of latency are true?”

A High BW on a link – could cause latency
B Split Horizon – could cause latency
C Prop Delay – what is prop delay, never heard of it
D Serial Delay – what is serial delay, never heard of it
E Under-Utilization of a link – nothing slowing anything down

Answer says CE but there is a comment saying “correct answer is BE”

“A”&”B” are better answers if you are looking for CAUSES of latency

QUESTION 620
Which two causes of latency are true? (Choose two)
A. High bandwidth on a link
B. Split horizon
C. Propagation delay
D. Serialization delay
E. Under-utilizaion of a link

I think the correct is C and D. It makes more sense. What do you think guys ??

Still about the Q620. Please see the reference URL which explains about Serialization and Propagation delays.

https://community.cisco.com/t5/switching/how-to-understand-serialization-delay-and-bdp/td-p/2409563

Hi, does anybody know where I can get a PDF version of the Cert Guide?
Thanks

@Delwans what version of neeetwworking vce are you using?

Hey Guys, Is the version 2.1 of nettworking answers are now corrected?

@TravellingWilbury

take it

https://www.pdfdrive.com/ccnp-routing-and-switching-route-300-101-official-cert-guide-e17789983.html

@mosh i noticed 2.1 still has wrong answers, if you find any incorrect answers please submit an email to nneettwookkriing with the question number and your source to backup your answer.

this should go for everyone, good learning opportunity

Hello Guyz , for Q620 – latency cause, definitly the answers are:
C. Propagation delay
D. Serialization delay

I am wondering for this question:
QUESTION 418
Which action can you take to mitigate unicast flooding in a network?
A. Configure VLANs to span multiple access-layer switches.
B. Implement a nonlooped network topology.
C. Set the ARP timer value to less than the CAM timer value.
D. Set the CAM timer value to less than the ARP timer value.

I think the right answer is B. (instead of C)
Flooding cause are: asymetric routing, SPT topo change, FW table overflow
to mitigate asym routing: ARP timer = CAM timer value (so C and D are false)

what is recommended? study only dump of netowrking??? Thanks in advance

@WAV
Were you able to pass with the Spoto dumps?
Planning on next week.

Shout out to @nneettwwoorrkkiinngg

It is highly recommended to learn the Theory behind the answers. Memorizing dumps will lead you to getting eaten alive by real network engineers on the outtage call. You better have answers for the bosses as to what happened, why, and how to prevent it again or you won’t have a job for long. I’ve been studying theory on ccnp route topics for 8 months using Pluralsight, figured out how to use GNS3 finally to set up my own labs for testing, use 3 different testing mechanisms digitut, pass4sure (which is excellent at backing up answers with Cisco documentation but i haven’t actually seen any of the questions here on Pass4sure but I believe they really aim now to help understand theory) and now just bc i was curious to see the hype dumps from nnneettwwoorrkkiinngg, but it’s important to confirm answers are correct through searches of Cisco documentation. If you understand the theory, it doesn’t matter what questions you run into.

Passed used.. Neetworrk 2.1 cross checked it with 1.1 and SPOTO sent by CCNP2018 and it all checked out.. Got 985.

LABS: Configure ospf area to 13 with an id 16. This lab is on the Spoto dump, i got a different ip and subnet, have to calculate this on the exam… Got Cases and Eigrp stub

Few re-worded questions on dra and drop and MCQ.

Thank you all!!!! Especially Neetworrkkk.

Congrats @WritingTuesday!

Hi @WritingTuesday,

What is the SPOTO shared by CCNP2018?, could you share?. Also, please share 1.1 as I only have the 2.1.

Please send it to JAJAJA9122 @ gmail . com

Many Thanks,

mee to ,
What is the SPOTO shared by CCNP2018?, could you share?. Also, please share 1.1 as I only have the 2.1.

please send it to {email not allowed}

many thanks

mee to ,
What is the SPOTO shared by CCNP2018?, could you share?. Also, please share 1.1 as I only have the 2.1.

please send it to d e l i x 1 9 9 2 @ gmail. com

many thanks

“Hello Guyz , for Q620 – latency cause, definitly the answers are: C. Propagation delay, D. Serialization delay”

Latency
Latency is the amount of time for a message to go from point to another. Network latency is the amount of time for the packet to travel the network from the original source to the final destination. Several factors can cause latency, including propagation delay,
serialization, data protocols, routing, switching, queuing, and buffering. The flow control and reliability features of TCP have an effect on end-to-end latency. TCP requires an established virtual connection, and bidirectional communications for acknowledgments, window sizes, congestion control, and other TCP mechanisms, all of which has an effect on latency. UDP is a protocol that does not include reliability or flow control. A device simply sends packets with UDP segments with the assumption that they will reach their destination. UDP is typically used for applications such as streaming media that require minimal delay and can tolerate occasional packet loss. UDP has very low latency, better than
most TCP connections.

Guess I have to agree, all could cause latency, but C & D seem to be the best answers.

@JOCA the correct answer for Q620 is CD and so is in the v2.1 VCE file as well. The thing is that in the comments box of the VCE Player says that the correct answer is BE but the chosen answers has to be CD to be right. That Comment Box is not ok with the correct answer in the Player itself. They don´t match all the time.