Share your ROUTE v2.0 Experience

Guys quick question, Is 1.1&1.0 dump same? I have been doing 1.1 so could you plz tell me on which page i can download the other from if they’re different. Thanks xx Plz Reply

@nneewwoorrkkiinngg,

Can you please update new dumps with updated answer.
Thanks in advance.

@comin

Q229 < need to check
Which SNMP verification command shows the encryption and authentication protocols that are used in SNMPV3?
A. show snmp view
B. show snmp
C. show snmp user
D. show snmp group

Correct Answers : C

QUESTION 702
Which routing protocol routers traffic through the best path and second best path at the same time?
A. EIGRP
B. BGP
C. OSPF
D. RIP
Correct Answer: B

QUESTION 559
which protocol use both best path and second best path for traffic??
A. EIGRP
B. OSPF
C. BGP
D. RIP
Correct Answer: A

@Ahmed

Thanks.

Hi All,

I am a little confused about which ones are valid from the previous conversation.
I have an exam next week and it would be great if someone can help me with which one should I prepare from. (Nneettwwooorrkkiinngg_v1.1, nneettwwoorrkkiinngg_v2 or by Kikavich)

Thanks for the help :)

hey guyz cn uh post the new que in the exam hv seen most of them hv wrong answers plz

@allgooduh cn you share wth me the nneettwwoorrkkiinng ver 2.0 dump plz hv an exam next week also

@Ahmed

if you know the answer, share me.

QUESTION 535 < need to check
Which task must you perform to enable a point-to-point Frame Relay connection?
A. Configure the encapsulation type
B. Disable inverse ARP
C. Enable Inverse ARP
D. Configure static address mapping

Correct Answer: A or ???
thanks.

@Anonymous, let us wait to hear from others about which one is valid because with the previous discussions, it seems v1.1 is preferable.

Wakanda Forever!

@Anonymous

702 and 559 —> A

@nextweekexam

No idea, I hate tis question. If you know anything let us know

@Anonymouse

QUESTION 535 < need to check
Which task must you perform to enable a point-to-point Frame Relay connection?
A. Configure the encapsulation type
B. Disable inverse ARP
C. Enable Inverse ARP
D. Configure static address mapping

Correct Answer: A or ???

This Question is tricky but behalf of the below resource i believe A is correct Answer .

Here is your step-by-step guide to configuring Frame Relay:

The first step should always be to configure the physical interface to use Frame Relay encapsulation using the command encapsulation frame-relay in interface configuration mode.
Configure an IP address on the interfaces or sub-interface using the good old ip address command.
Optionally, configure the LMI type of each physical interace using the frame-relay lmi-type command.
Optionally, change the default Frame Relay encapsulation using the command encapsulation frame-relay. If you use the command on the interface (or sub-interface), it will change the encapsulation for all VCs on the interface (or sub-interface. If you want to change the encapsulation only for a specific VC, you should use the ietf keyword with the command frame-relay interface-dlci (point-to-point sub-interfaces) or frame-relay map.

I mixed it!

535 the correct question is the A.
If they asked for point-to-multipoint it would be D.

@delwans
please see the answer and feedback the answer.
thanks

QUESTION 535
Which task must you perform to enable a point-to-point Frame Relay connection?
A. Configure the encapsulation type
B. Disable inverse ARP
C. Enable Inverse ARP
D. Configure static address mapping
Correct Answer: D >>> ????
I choose A, becz PTP did not need mapping. right ?
thanks.

@All,
Passed few hours ago with 922/1000
Drag & Drop I got are : COPP/MPP, Frame Relay Multipoint, GRE Features, IPv6 Router Security Features (IPv6 Traffic Filtering vs IPv6 Access Classes), AAA Features,
LABS are: EIGRP Stub, OSPF Virtual-Link, EIGRP/OSPF Redistribution
@nneettwwoorrkkiinngg and other contributors, well done for the great job you are doing here.
I personally verified most of the answers to the questions using : Cisco websites, The Official Cert Guide by Kevin Wallace and also Cisco ASR 1006 router I manage for my enterprise company (especially the output of “show” commands)).

All the best guys.

Please do we have this type of forum for the SWITCH exam?

@Ahmed,
@Delwans

if you know the correct answer, please answer the question.

QUESTION 685
Which two statements about ICMP unreachable messages are true?(Choose two)
A. They are sent when a route to the destination is missing from the routing table
B. They can be enabled and disable on a device only on a global level
C. They are sent when a destination address responds to an ARP request
D. They include the entire packet so that the source can identify the process that generated the message
E. They include a portion of the original data so that the source can identify the process that generated the message
Correct Answer:

QUESTION 686
Refer to the exhibit.
interface gigabitethernet 2/0/0
vnet trunk
ip address 192.168.1.1 255.255.255.0
vnet name cisco

Which effect of this configuration is true?
A. It designates the interface as a GRE tunnel endpoint
B. it configures 802.1q trunking on the interface
C. It designates the interface as an EVN trunk
D. It removes VTP from the interface
Correct Answer:

@Nextweekexam

Check the comments in the page 193 ;)

@Excellence

Congrats mate!

For Switching http://www.certprepare.com/

Thanks @Delwans

many friends told me that SPOTO dump is very good and valid !
What do you think about it ? is it wright ?
If anyone have SPOTO last dump as VCE please share it the download link

@nextweekexam

if you know the correct answer, please answer the question.

QUESTION 685
Which two statements about ICMP unreachable messages are true?(Choose two)
A. They are sent when a route to the destination is missing from the routing table
B. They can be enabled and disable on a device only on a global level
C. They are sent when a destination address responds to an ARP request
D. They include the entire packet so that the source can identify the process that generated the message
E. They include a portion of the original data so that the source can identify the process that generated the message
Correct Answer: AC

Router4#show arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 100.0.0.4 – 0000.0c5d.7a0d ARPA Ethernet0
Internet 100.0.0.5 0 Incomplete ARPA
Internet 100.0.0.1 2 0060.5cf4.a955 ARPA Ethernet0
After a predetermined period, this incomplete entry is purged from the ARP table. As long as the corresponding MAC address is not in the ARP table, the ping fails as a result of “encapsulation failed”.

https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-121-mainline/12778-ping-traceroute.html

QUESTION 686
Refer to the exhibit.
interface gigabitethernet 2/0/0
vnet trunk
ip address 192.168.1.1 255.255.255.0
vnet name cisco

Which effect of this configuration is true?
A. It designates the interface as a GRE tunnel endpoint
B. it configures 802.1q trunking on the interface
C. It designates the interface as an EVN trunk
D. It removes VTP from the interface

Correct Answer: B

@Excellence

Congratulation Brother … Best of luck for your switch exams .

@Ahmed
@nextweekexam

Q686 is C!

“An EVN trunk interface connects VRF-aware routers together and provides the core with a means to transport traffic for multiple EVNs. Trunk interfaces carry tagged traffic. The tag is used to de-multiplex the packet into the corresponding EVN. A trunk interface has one subinterface for each EVN. The vnet trunk command is used to define an interface as an EVN trunk interface. ”

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book/evn-overview.html

@Delwans

Yeah brother i agree with you before i don’t have such explanation you provide to us .

Thanks .

@Excellence
congratulation bro
I am happy to hear
I am creating new dump files please contact for me nneettwwoorrkkiinngg @ gmail .com

@FIFA
congratulation bro :)

HI all,
my dump is updated Today
sorry for late updated because I worked hardly last week and I got little ill

if you see any wrong Question and Answers or duplicate, please send my mail wrong answer and true answer with source documantry

good luck my friends
see you later

Networking – Questions-August = 197
Networking – Questions DAY-1 = 98
Networking – Questions DAY-2 = 89
Networking – Questions DAY-3 = 89
Networking – Questions DAY-4 = 126
Networking – NEW Questions = 127
Networking – EIGRP & OSPF Simlets = 8
Networking – DRAG & DROP = 29
Networking – LAB(soon) = 0

nneettwwoorrkkiinngg @ gmail.com

@ nneettwwrrookkiinnggg

Thank you for your help and your time :)

can you advise a trusted site to practice labs? or how soon you will add the labs?

Thanks Networking. Just looking into Aug section would cover the choices and D&D?

@nneettwwoorrkkiinngg,
why not just give the password to the VCE file out? That way nobody has to wait a week “because you got il”

@nneettwwrrookkiinnggg
@Delwans
@Ahmed

IF YOU KNOW CORRECT ANSWER, PLEASE LET ME KNOW.

QUESTION 651
Which two statements about EVN are true?
A. It supports IPv6 traffic.
B. It can support up to 16 VNs.
C. It uses redistribution to share routes between VNs.
D. It supports SSM only.
E. A configuration can be based on an existing VRF configuration
NEW V2.1 Answer: C, E. I THINK > a,e.

@Nathan

I didn´t even open the Dumps but I can tell you. No, learn all of them.

Guys quick question, Is 1.1&1.0 dump same? I have been doing 1.1 so could you plz tell me on which page i can download the other from if they’re different. Thanks xx Plz Reply im waiting.

why is everyone relying on the dumps instead of using whats here? are the q’s on digi not sufficient? @digitaltut

@NEXTWEKEXAM

QUESTION 651
Which two statements about EVN are true?
A. It supports IPv6 traffic.
B. It can support up to 16 VNs.
C. It uses redistribution to share routes between VNs.
D. It supports SSM only.
E. A configuration can be based on an existing VRF configuration

Correcr Answers : CE

The following are not supported on an EVN trunk:
Access control lists (ACLs)
BGP interface commands are not inherited
IPv6, except on vnet global
Network address translation (NAT)
NetFlow
Web Cache Communication Protocol (WCCP)

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book/evn-overview.html

Passed yesterday 92x / 1000
DND — FR point to multipoint, access list, AAA functions
LAB — OSPF virtual link, redistribution case 2, EIGRP stub
networkinggg dumps are valid, was able to take the exam prior to the August dump correction but i researched the correct answers and took consideration of the previous comments. i greatly appreciate networkinggg and the others that contributed their knowledge on this. goodluck to all exam takers :)

@goal_bound yes & no, Digitualtut has some questions with explanation, in dumps everything is combined which helps when you practice them, thats all.

P.S no one answered my question since yesterday which is kinda sad :(

@Amy Barnes

Download download from below link .
networkkkkkking dumps version 2.1

drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

Hi All

SPOTO 146Q is still valid ?

I’m Exam on tomorrow !!!

@Ahmed

thanks for your reply. question is ask EVN, NOT EVN TRUNK. THAT WHY IT SUPPORT IPV6.
RIGHT.

QUESTION 651
Which two statements about EVN are true?

The following are not supported by EVN:
IS-IS
RIP
Route replication is not supported with BGP
Certain SNMP set operations

The following are not supported on an EVN trunk:
Access control lists (ACLs)
BGP interface commands are not inherited
IPv6, except on vnet global

Can u share last dump please?

http://www.mediafire.com/file/g0go4rndrrsci44/NEW%20SPOTO%20146%20Q%26As%20300-101-CCNP%20ROUTE.pdf

@Anam

The password is very easy to remove, insecure in designer 1.0.2…..

BUT….

Although i agree that everyone should be be able to modify and update there own VCE (Which i do myself and classify into study areas, OSPF, EIGRP etc), networkkingggggg has spent his own time updating and keeping the file correct, also the time involved in creating the drag and drop areas is time consuming.

And in a way i agree there should be a GateKeeper to stop “too many cooks” and other people making profit of NetworkKinggggs time and effort.

That been said. If you REALLY DO want 2.1 for your own study without a password just drop me your email.

Maybe also give NetworkKingggg a break with the attitude its his choice at the end of the day!

@ NetworkKingggg you are the best !!!!!

@nnehboo
congratulations bro
92xx good score
i am happy to help you.
valid dump nneettwwoorrkkiinngg
if you know , please share with me wrong answer and questions
nneettwwoorrkkiinngg @ gmail.com

Hi all
please careful dishonest
I just help to people.
please Study all Questions.

@nextweekexam

QUESTION 651
Which two statements about EVN are true?

What about it clearly mention the supportable protocols & there is no IPV6 option .

EVN supports IPv4, static routes, Open Shortest Path First version 2 (OSPFv2), and Enhanced Interior Gateway Routing Protocol (EIGRP) for unicast routing, and Protocol Independent Multicast (PIM) and Multicast Source Discovery Protocol (MSDP) for IPv4 Multicast routing. EVN also supports Cisco Express Forwarding (CEF) and Simple Network Management Protocol (SNMP).

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book/evn-overview.html