Share your ROUTE v2.0 Experience

@Angeliana
Had the redistribution sim too. All but one were fastethernet interfaces. I had no problem using the eigrp route instead if the ospf one after changing the distance for external eigrp routes

Is dump Questions 484 still valid ?

In EIGRP eval,
Question 4: What is the advertised distance for 192.168.46.0 network on R1?
which show command would provide the answer? what would the advertised distance be?
Thank you so much

Are the PBR EIGRP and the Redistrbute the most common sims to get? If not what ones should I focus on?
Thanks for the help and gratz to all that have passed

Also what D&D are the most common?

Can somebody provide the link for Lab sims with GNS3 files or packet tracer simulations ?

@Frum

answer is B. show track

Can anybody share the Lab sim for GNS3 or packet tracer? Please!

maximmbox-in(@)yahoo.com

@ Kahled- Can you pls share the latest dumps with me buddy: jagtianimohit (@) gmail (dot) com

@Angeleania. If you may, can i have a copy of deff V1.5?

updated the latest ccnp exam 455Q
http://www.fpje.com/ccie.html

Are the links people post here real?

please with the redistribute lab if between R2-R3 is ethernet link and between R2-R4 is serial link am redistribute OSPF to EIGRP on R2 should i have to use the mtu,bw,delay and tx/load of
the ethernet which is 1500,10000,100,1,255 or serial 1500,1544,2000,1,255 for the OSPF metric? please guy who have already taken there exam please clear my doubt have my exam soon

Today,Passed with 9xx , thanks guys who shared (updated by procyber 01.11.2017), digital tut community.
lab
redistribution,ospf stub,eigrp evaluation and ospf evaluation.
practice before attempting exam …All the best:)

RAM145 congratulation!! . did you even have lab” policy” in your exam?

@RAM145 please the redistribute lab between R2-R4 was it serial link and R2-R3 was it ethernet if yes when redistributing for ospf to eigrp on R2 which one of the link mtu,bw,dl.tc,load did you use for the OSPF metric was 1500,1544, 200,1,255 or 1500,10000,100.1.255 ? please help man am having my exam soon

passed today 9xx
Lab and Sim: redistribution, pbr, ospf, eigrp eval and ospf eval.
DND: Frame-relay, NAT-PT/NAT64, Access-list, AAA, mGRE/IPSec/tunnel-key.., uRPF strict/loose, IPV6 traffic filter/access.

procyber 1.5 vce is valid

many of the qs that came are compiled here as well https://pastebin.com/NfKCSfxQ

Thank you to the digitaltut family

where to get procyber 1.5 vce ?

Passed today 9xx,

procyber 1.5 vce is valid, had at least 3 questions that I had never seen before, one about Radius, the others about IPv6.

Lab and sim: PBR, OSPF sim, ospf eval, Eigrp eval and redistribution. My redistribution sim had a ethernet Link between R2 and R3.

Thanks and good luck everyone.

Can someone clarify the following two questions for me? I’ve been reading conflicting information and just want to get a different opinion. Thank you

A network engineer has been asked to ensure that the PPPoE connection is established and
authenticated using an encrypted password. Which technology, in combination with PPPoE,
can be used for authentication in this manner

A. PAP
B. dot1x
C. IPsec
D. CHAP
E. ESP

A new TAC engineer come to you for advice. A GRE over IPsec tunnel was configured,
but the tunnel is not coming up. What did the TAC engineer configure incorrectly?

A. The crypto isakmp configuration is not correct
B. The crypto map configuration is not correct
C. The interface tunnel configuration is not correct.
D. The network configuration is not correct; network 172.16.1.0 is missing

can one send ccnp route latest dumps at suffianmanzoor @ gmail.com

Thanks in advance

@Mac, CHAP is used for authentication with PPPoE, PAP is simple [username and password only] where as CHAP will offer authentication/encryption.

GRE Questions –

You need to look at the question.

For the ACL one, you’ll see permit gre is missing, this will mean the ACL is configured incorrectly
For the Tunnel Configuration, you will see 172.16.x address being referenced as Tunnel Destination, which is incorrect. 192.168.x Destination is correct.
ISAKMP one is where the isakmp command is pointing to 172.16.x address, where it should be pointing to 192.168.x address

Hi Guys,

someone can explain me what is procyber v1.5
Thx
Alex

@koki thanks for respond in reference to the PPPoE question that is exactly what I thought/know however I saw in the dump that the answer is listed as ESP which is why I asked for clarification.

Thanks for the help on the other GRE questions I appreciate it.

what is a good free utility for vce files?

7. When a packet is denied by an IPv6 traffice filter, which additional action does te device perform?
a. A creates a null route for te destination and adds it to the route table.
b. It scans the rest of the ACL for a permit entry matching the destination.
c. It generates a TCP Fin bit and sends it to the source.
d. It generates an ICMP unreachable message for the frame.

Answer, ??

Passed today 8xx

All questions on procyber 1.5 vce and the same labs here.

Thanks to all and good luck!

Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations

??

7. When a packet is denied by an IPv6 traffice filter, which additional action does te device perform?
a. A creates a null route for te destination and adds it to the route table.
b. It scans the rest of the ACL for a permit entry matching the destination.
c. It generates a TCP Fin bit and sends it to the source.
d. It generates an ICMP unreachable message for the frame.

Answer: D (as per procyber 1.5)

29. In which scenario can asymmetric routing occur?
a. active/active firewall setup
b. single path in and out of the network
c. active/standby firewall setup
d. redundant routers running VRRP

can anybody share the correct answer?

33. A network engineer needs to verify IP SLA operations on an interface that shows on indication of excessive traffic. Which command should the engineer use to complete this action?
a. show frequency
b. show track
c. show reachability
d. show threshold

can anybody share the correct answer?

@S.Hi
NPTv6 for IPV6 to IPV6
C and E
IPv6 traffice filter
D
@paper
29- A
33- b

Dear all of guys, two next week I will joined exam CCNP Route.

Please help share me about your experience and update to me about new question and labs.

Thanks you! :)

Hi all.. can someone help me with this question

Which type of info is displayed with the command show track 1

A. information about tracking list 1
B. time to next poll for track object 1
C. information about the ip route track table
d. tracking information statistics

@Samil, I didn’t get any policy lab.
I got – Redistribution,pbr,ospf stub labs

Hey everybody,

What is your opinion regarding
/*
Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working, what is the reason
a. Area id mismatch
b. authentication mismatch
c. Process id issue
d. ospf timers not match
*/

Dumps says A and D.
Ok, but why not B?

@Maj Winters,can you please share your dumps:).please
htsepang at yahoo.com

Hi guys, passed route today.9XX :)
484Q still valid

@Ram145 thanks bro i got it now clear…..

hey guys ,looking for a free link to download ccnp route 300-101 dumps… please help me out anyone… only few days left for exam.

Failed with 6XX !!!!!!!!!!!!
Had 5 labs . Eigrp redistribution . Ospf eval. . Eigrp eval. . Pbr . Ospf sim . All full correct and solved like tut but 43 mcq and D&D more than half of them are new ( not mentioned in passleader 470q ) still i solved 5 labs . Shouldnt that give me about 500 marks !!!!!!!!!!!!!!!!!

@Anonymous
Did you used the procyber 1.5 vce ?

@300-101
can you share the documentation you used ?

anyone please share the link to download/install the application (vce emulator) to play procyber 1.5 vce file ??? plz plz plz guys…!

@Crazy
no i only used passleader 470q , what is the procyber , i almost searched every where for this vce and found nothing ….

@Anonymous wont let me put the links in sent me you email or something

drive.google.com / open?id=0BxQV8_fCv60edENpbWI4WmcwQkU

GUYS… FOR VCE FILE LINK AND PROCYBER 1.5 CHECK PRIVIOUS PAGES COMMENTS.. SOMEWHERE BETWEEN 185 – 200… !!

here is the VCE : drive. google . com / open?id= 1uetIqDkl8shjUR6yru ZtmPWNyAR64m1q

no spaces