Share your ROUTE v2.0 Experience

Please share spoto 146q in my mail id , Please Please
nli @asi.com.au

Networking latest dump aren’t valided . I failed the exam today

Something wrong. Sim lab such as eigrp and ospf arn’t contained in exam . All of questions from Augest dump but answer are not corrected. All of labs are not allowed copy run start command and in the eigrp ospf redistribution lab , route path are not converted when I typed the command “distance eigrp 90 105. What’s the problem .
Good luck guys!!!!!

hey 20180813 Is answer or dump not valid?

Please share spoto 146q in my mail id , Please
hmedto89 at gmail dot com

Which questions in the August dump are wrong?

@test
Sorry , latest Augest dumps are valided but answer is not corrected.

@20180813

please share the lab,dnd and quiries you got

@20180813 – I was not able to type “distance 90 105 either. distance wasn’t even an option and the link was FastEthernet

@20180813 I am sorry but if the questions are the same, there is not much difference in answers.
What mistakes did you see, which questions you should mention when you say your output number.

Can you write down the numbers of the questions that come out of the Q205,Q205 etc.?

Here are the different questions. We need to check them out.
Q189
Q229
Q402
Q404
Q537
Q538
Q613
Q621
Q641
Q644
Q648
Q649
Q662
Q692
Q700
Q709
Thanks

Exam A, Q229 is wrong. The correct answer is show snmp user. Show snmp group does not show you the protocols used

Which questions are wrong in august dump?

Labs are still same with digital tut premium questions? right?

@Anam,
Yes…Correct answer is Show snmp user.
We need to get the answers re-verified & updated in Networking dumps.

I have emailed the networking guy to ask for the password to the VCE file, but have received nothing. I have no problem making these updates

In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. ???
ANS A OR B

Hi Guys.

I have seen many times that you ask about Q202 or Q405 or Q….
When I check this question on the dumps, they are different questions. Where can I find the exact number of them?

Another question….

Is someone having issues with the D&D in the VCE program? When I use them the VCE crashes :(

@20180813
Hi Bro Sorry I hear to fail
did you study just 140 q or all my dump?

nneettwwoorrkkiinngg hello,

firstly, thanks for everything that you did.

Can you check your new 140q August dump? Someone’s say that there are too many wrong answers.

We need your help.

QUESTION 537
In which two areas does OSPF send a summary route by default ?
A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal
Correct Answer: CD!!!

QUESTION 404
Which technology is required on an EVN trunk interface?
A. 802.1q
B. NAT
C. VRF-Lite
D. IS-IS
Correct Answer: A!!!

“EVN is supported on any interface that supports 802.1q encapsulation, for example, an Ethernet interface. Instead of adding a new field to carry the VNET tag in a packet, the VLAN ID field in 802.1q is repurposed to carry a VNET tag.”

QUESTION 538
Which LAN feature enables a default gateway to inform its end devices when a better path to a destination is available ?
A. HSRP
B. ICMP unreachable messages
C. ICMP redirects
D. Proxy ARP
Correct Answer: C!!!!
Section: Networking

Description

The gateway sends a redirect message to a host in the following
situation. A gateway, G1, receives an internet datagram from a
host on a network to which the gateway is attached. The gateway,
G1, checks its routing table and obtains the address of the next
gateway, G2, on the route to the datagram’s internet destination
network, X. If G2 and the host identified by the internet source
address of the datagram are on the same network, a redirect
message is sent to the host. The redirect message advises the
host to send its traffic for network X directly to gateway G2 as
this is a shorter path to the destination. The gateway forwards
the original datagram’s data to its internet destination.

https://tools.ietf.org/html/rfc792

QUESTION 613
When OSPF is forming an adjacency, in which state does the actual exchange of the information in the link-state databse occur?
A. INIT
B. Exstart
C. Loading
D. Exchange

Answer: C!!!!

Loading

In this state, the actual exchange of link state information occurs. Based on the information provided by the DBDs, routers send link-state request packets. The neighbor then provides the requested link-state information in link-state update packets. During the adjacency, if a router receives an outdated or missing LSA, it requests that LSA by sending a link-state request packet. All link-state update packets are acknowledged.

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html

Question 641 – I have already posted about that question above.

QUESTION 648
Which OSPF network type uses a DR?
A. Nonbroadcast multi-access
B. point-to-point
C. point-to-multipoint
D. point-to-point nonbroadcast
Correct Answer: A!!

“We only use a DR/BDR on a multi-access network. There is no need to do this on a pointto-
point link like a PPP connection.”

QUESTION 700
Company is deploying a multicast applic ation that must be accessible between sites, but must not be accessible outside of the organization
Based on
A. FF00:/16
B. FFOE:/16
C. FF02:/16
D. FF08:/16
Correct Answer: D!!!

Unfortunately, I cannot find the document related. I saw it somewhere though.

I totally agree wit @very hard working. I just checked a couple of questions and the answers are absolutely changed…. I wouldn´t trust the new 140q yet. Sorry @nneettwworrking, still thanks for the effort.

Hi all
@20180813 fake user please care full
nneewwoorrkkiinngg dump is valid!!!!!
study all Questions
focus August Qestions

@madaro
@Anonymous01
Bro I will check
I am out now
see you later

what is about spoto dump, many people here says it’s valid ?

@nneewwoorrkkiinngg,

You are the best. Good work !!

americannetworkinstitute(dot)ml

@nneewwoorrkkiinngg, can you correct the worng question in Augest section
thank you for your effort

@omesab
I will check, I am out today,
if you see any wrong q please send my mail

nneettwwoorrkkiing @ gmail . com

hmmm.. looks like the new August questions has changed some answers..

brothers need to SPOTO dump, if someone have it please share it with me ! it’s urgent because my exam will be next week
37 dot alaa at gmail com

Q189
Correct:
Flow Sample for specific protocols
IP Packet distribution

Q404
802.1q???

Q537
Stub
Totally Stubby

Q556
The two spokes are behind different PAT devices
**keep alive setting is locally significant

Q621
Propagation delay
Serialization delay

Explanation:

The Many Components of Latency
.
.
.
Propagation delay
Amount of time required for a message to travel from the sender to receiver, which is a function of distance over speed with which the signal propagates.

Transmission delay
Amount of time required to push all the packet’s bits into the link, which is a function of the packet’s length and data rate of the link.

Processing delay
Amount of time required to process the packet header, check for bit-level errors, and determine the packet’s destination.

Queuing delay
Amount of time the packet is waiting in the queue until it can be processed.

https: // hpbn.co/primer-on-latency-and-bandwidth/

Q643:
Choose two…
Only allowed to select one.
Answer given is correct though

Q649
VLAN is shutdown
Security Violations
It is a security violation when one of these situations occurs:
•The maximum number of secure MAC addresses have been added to the address table, and a station whose MAC address is not in the address table attempts to access the interface.
.
.
You can configure the interface for one of three violation modes, based on the action to be taken if a violation occurs:
.
.
•shutdown vlan—Use to set the security violation mode per-VLAN. In this mode, the VLAN is error disabled instead of the entire port when a violation occurs
https: // http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_53_se/configuration/guide/3750xscg/swtrafc.html

Q647
need to remove encapsulation ppp

Q654
NO answer

Q662
No answer

Q666
Coorect answer – Variance 3

Q669
Use RADIUS in the following network environments that require access security:

Networks with multiple-vendor access servers, each supporting RADIUS. For example, access servers from several vendors use a single RADIUS server-based security database. In an IP-based network with multiple vendors’ access servers, dial-in users are authenticated through a RADIUS server that has been customized to work with the Kerberos security system.
Turnkey network security environments in which applications support the RADIUS protocol, such as in an access environment that uses a “smart card” access control system. In one case, RADIUS has been used with Enigma’s security cards to validate users and grant access to network resources.
Networks already using RADIUS. You can add a Cisco router with RADIUS to the network. This might be the first step when you make a transition to a Terminal Access Controller Access Control System Plus (TACACS+) server.
Networks in which a user must only access a single service. Using RADIUS, you can control user access to a single host, to a single utility such as Telnet, or to a single protocol such as Point-to-Point Protocol (PPP). For example, when a user logs in, RADIUS identifies this user as having authorization to run PPP using IP address 10.2.3.4 and the defined access list is started.
Networks that require resource accounting. You can use RADIUS accounting independent of RADIUS authentication or authorization. The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session. An Internet service provider (ISP) might use a freeware-based version of RADIUS access control and accounting software to meet special security and billing needs.
Networks that wish to support preauthentication. Using the RADIUS server in your network, you can configure AAA preauthentication and set up the preauthentication profiles. Preauthentication enables service providers to better manage ports using their existing RADIUS solutions, and to efficiently manage the use of shared resources to offer differing service-level agreements.
RADIUS is not suitable in the following network security situations:

Multiprotocol access environments. RADIUS does not support the following protocols:
– AppleTalk Remote Access (ARA)

– NetBIOS Frame Control Protocol (NBFCP)

– NetWare Asynchronous Services Interface (NASI)

– X.25 PAD connections

Router-to-router situations. RADIUS does not provide two-way authentication. RADIUS can be used to authenticate from one router to a non-Cisco router if the non-Cisco router requires RADIUS authentication.
Networks using a variety of services. RADIUS generally binds a user to one service model.

https://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrad.html

Q700
Correct should be: ff08::

Explanation:
Prefix Scope
ff02:: Link Local: spans the same topological region as the corresponding unicast scope, i.e. all nodes on the same LAN.
ff05:: Site local: is intended to span a single site
ff08:: Organization scope: Intended to span multiple sizes within the same organization
ff0e:: Global scope, assigned by IANA.
ff01:: Interface local: Spans only a single interface on a node and is useful only for loopback transmission of multicast.

http: // ipv6friday.org/blog/2011/12/ipv6-multicast/

Q702
????

Q709
Answer is correct
Explanation:
Caution If neither the enable password command nor the enable secret command is configured, and if there is a line password configured for the console, the console line password will serve as the enable password for all VTY (Telnet and Secure Shell [SSH]) sessions.

https: // http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/command/reference/fsecur_r/srfpass.html

@asd_me are these corrections to nneettwwrrookkiinnggg’s version 2 exam?

@ nneettwwrrookkiinnggg’s

The drive contains 710 que in PDF. Is this what all of you are referring to?
I see some discussion on 140 Q.
Can someone please help me to understand

Can someone, who completed there Exam please comment , are you referring to 710 or is there a separate 140 Q?

Those are for the new August questions..

Its a new collection.. nneettwwrrookkiinnggg might just need to clean it up for now..

Im taking my exam tomorrow.. hopefully I am right lol..

Hi, i wanted to know this question:

Q: what happends when unicast flood protection is triggered on a vlan
A The VLAN is shutdown
B Traffic on the VLAN is load-balanced across multiple links
C The VLAN is removed from the VLAN database
D Traffic on the VLAN is passed to another VLAN with lower load

The “D” is marked as correct but that’s not possible, the only actions of unicast flooding protection are: syslog, shutdown or limit. Not load balance.

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6000-series-switches/23563-143.html

i think the answer is “A”.

@joanalesan
Yeah, that is Q649 (just above this post)

passing traffic to another VLAN defeats the main purpose of VLAN.

@nneettwwrrookkiinnggg,
Why is it so difficult to just provide the password to the VCE file so that we may update the mistakes ourselves?

@nneettwwrrookkiinnggg

QUESTION 666
Refer to the exhibit.
You want router r1 to perform unequal-cost routing to the 192.168.10.0/24 network.
What is the smallest EIGRP variance value that you can configure on R1 to achieve this result?

Your answer is A. 1. ( I think this is wrong ).

need to choose variance 4. becz of you want unequal-cost routing for this network.

Hi friend,

I just finished my switch exam and planing to do the route exam soon. Can anyone guide me for correct materials here. It would be very helpful. Thanks.

nneettwwrrookkiinnggg :)

save us. Please update your vce with correct answer.

Thanksss

@netnneettwwrrookkiinnggg
QUESTION 613 – V2.
When is OSPF forming an adjacency, in which state does the actual exchange of the information in the link-state database occur?

v2 pdf answer is D. (Exchange) [ i think it is wrong ]

the correct answer is C. ( Loading ) base on this …

Loading
In this state, the actual exchange of link state information occurs. Based on the information provided by the DBDs, routers send link-state request packets. The neighbor then provides the requested link-state information in link-state update packets.

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html

Hello guys,

Regarding the following question:

QUESTION 537
In which two areas does OSPF send a summary route by default ?
A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal
Correct Answer: DE

Correct Answers should be BD!!!
I overlooked the question the previous time when i said its CD. Summary route means LSA type 3 message. We know that Totally Stubby Area rejects Interarea and External routes instead it installs a default route. Interarea routes are normally injected with LSA type 3 within the other areas.

Hi @ nneettwwoorrkkiing can you please send me latest dumps for ccnp route 300-101 it will be very helpful for me. thanks here is my email ceejaygomez74 @ g m a i l . c o m thanks a lot

@Anonymous01

Q 537
the correct answer is CD. becz of only ABR or ASBR are sent the summary route. that why the answer is Stub and Totally stub. only ABR( boarder) router can configure as the Totally stub area router. it will inject Type 5 and type 3 to ( you can’t see OIA, OE2 ) ONLY SEE O*IA.

That why correct answer: stub area and totally stubby area.

if I wrong, correct me.

thanks.