Share your ROUTE v2.0 Experience
Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
If there is no simulation in vce file, please let me know where you can see it.
If you send simulation information to my e-mail address, I will give 0.001btc.(bitcoin)
ocd01002 (at) naver.com
If there is no simulation(lab sim) in vce file, please let me know where you can see it.
If you send simulation(lab sim) information to my e-mail address, I will give 0.001btc.(bitcoin)
ocd01002 (at) naver.com
@KKK you said the ‘distance 90 105’ gose to R3 config ? that is not true that config should go to the R2 when is ethernet between R2 and R3 …..please someone correct me if am wrong
is passleader 470 questions still valid ?
@Polaris can you clear the air on the Redistribution sim. the question is between R2 and R4 if is Ethernet is when we should add the distance 90 105 on the R2?……and if it is Serial between R2 and R4 we dont need to add the command?………….pls any can help
@sungin, you can find all Lab Sim in this website at the page https://www.digitaltut.com/category/route-300-101/lab-sim in real exam can change only the IPs, interface number or some value, but the concept is identical.
I suggest doing some practice with labs before the exam
please digitaltut am confuse here with this Redistribution EIGRP-OSPF lab….my question between R2 and R3 if is ethernet and R2 to R4 is serial now when it come to redistribute from OSPF to EIGRP on R2 which interface mtu,bandwidth,delay and load are we using for the OSPF should it be fa1/0 or serial0/0…..please if anyone else can be of help will appreciate have my exam next week pls……………….eg R2- router eigrp 100
redistrbute ospf 1 metric 1500 2000 100 1 255 (f1/0)0R
metric 1544 1500 2000 1 255 (s0/0)
distance eigrp 90 105
Took the exam today and failed scoring 780….lots of diffrent MCQ’S
@Most is there is anything different from the Labs on digitaltut
is procyber itsme 1.5 VCE with 477 questions still valid ?
@ most: Which are the MCQ’s u got ?
is procyber itsme 1.5 VCE with 477 questions still valid ? Plz plz somebody reply. i have exam on coming wednesday
hi, all the labs are still valid, i will try and recall to post most of the questions i got.
i got these
Which two debug commands can you use to view issues with CHAP and PAP authentication? (Choose two)
A. debug tacacs
B. debug ppp authentication
C. debug radius
D. debug aaa authentication
E. debug ppp negotiation
Ans: BE
Which three IP SLA performance metrics can you use to monitor enterprise-class networks? (Choose three)
A. Packet loss B. Delay C. bandwidth D. Connectivity E. Reliability F. traps
Answer: A B D
@most did u study the new question which is published in the 208 page
@Giddah
I took the exam last week and about sim everything in Digit tut is current and if I am u I will just read the explanations and learn how to do configuration. I got high score on sim only by practicing here in digit tut. they have also GNS3 so you can practice and don’t worry it is all accurate
@300-101
yes that procyber VCE1.5 is valid don’t worry
@most
the those questions you mentioned are in VCE. I did the exam last week there was no new question all are here and in VCE. guys don’t panic just understand material and go for it.
can anyone tell me what the sim which came on recent exam. because i was confuse with name given above on some post by guys who pass the exam.
1. Ospf Evalaution SIM
2. EIGRP Evaluation SIM
3. OSPF-EIGRP Redistribute SIM
4. PBR SIM
5. IPV6 OSpf Virtual Link SIM
6.OSPF SIM (Portland,Amani,Lyniac routers)
7. EIGRP STUB SIM
8.EIGRP SIMLET
thanks
@Giddah I had Serial interface between R2 – R4. So in this case distance eigrp 90 105. Not sure if there would be different case…But I think that understanding of this problem is solvable. Good luck.
please send to vhysean at gmail dot com
@All
The one who passed the exam recently. can you please explain what needs to be warned and doubled checked in the exam? KKK you mentioned there was a need to put the timers instead something else. this kind of stuff can remove point for others who don’t know it :)
Can you please gather the things we need to be careful and put attention to?
Joe.
Passed with 8xx
.labs eigrp to ospf redis,ospf stub
Eigrp and ospf sim
Procyber 1.5 ce is atill valid…
Please can anyone share a ccnp dump which is valid now..have to write ccnp route on monday :(
mia.koning 12392 @ gmail .com
Hi all!!
Passed today with 8xx marks.
LABs: EIGRP SIM, OSPF SIM, OSPF STUB, PBR, OSPF EIGRP REDISTRIBUTE
Procyber is still valid.
Good luck everyone!!
Hello all,
I passed with 9xx score, “it’s me” dumps available in the comments and also digitaltut are all I used to study. After reading the official book and doing labs of course, dont be mediocre, study first then learn the dumps.
Kuddos
Passed with 8xx yesterday. I watched Chris Bryant Udemy videos and studied the questions and labs here.
Thanks everyone that keeps this site up to date.
pleas answer me ,
Which two commands must you configure on a DMVPN hub to enable phase 3? (Choose two)
A. ip nhrp interest
B. ip nhrp redirect
C. ip nhrp shortcut
D. ip network-id
E. ip nhrp map
F. ip redirects
Correct Answer: ?? is B and C is correct ??
k3@ write me on the Email,
senien366(at)gmail(dot)com
wich answer is correct pleas
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
??
Please share the latest CCNP route dumps…have my exam in 10 days: jagtianimohit ( @ ) gmail (dot) com
Hi, Can someone share file Procyber 1.5 or 1.4?? My email petro(at)o2.pl
Thanks in advance
@edoni
the answer is:
B. ip nhrp redirect
C. ip nhrp shortcut
@Ashik
I can’t remember all the questions, One particular new question is the default username used by Cisco router for CHAP authentication.
@ROUTE
I am completely relying on digitaltut only, not using any VCE.
updated the ccnp route valid dumps and share for it:
http://www.3cy.cn/ccie.html
hi guys, can anyone please tell me what is the correct answer.
which 2 protocols can cause TCP starvation (choose two)?
TFTP
SNMP
SMTP
HTTPS
FTP
someone who helps me with the below question.
which two statements about IP accesses lists are true? (choose two)?
1. they support wildcard masks to limit the address bits to which entries are applied/
2. extended access lists must include port number
3. ip access lists without at least one deny statement permit all traffic by default
4. they end with an implicit permit
5. entries are applied to traffic n the order in which they appear.
i think they are 2 and 3, but i am not sure
regards
@wailanpay
Answer : 1 5
Pass the 300-101 exam today with score of 9xx
Lab
– OSPF Eval SIM
– Eigrp Eval SIM (we cannot use any show ip eigrp xx command, we should use show ip route and show running command to answer the question)
– PBR
– OSPF SIM (Portland. Amania ) came with different name process ID 31
– OSPF and EIGRP Redistribute
One new Question : NAT64/NTPV6 drag and drop which is similar in dump by with different answer. most of question came from question post in this page. study this question in paste bin https://pastebin.com/NfKCSfxQ
Thanks Digitaltut, procyber and youtube for the support
hey guys , anyone plz help me out with latest/updated cisco route 300-101 dumps…! only few days left for exam… thanks in advance.
can anyone please send me latest dumps for 300-101 ?
wich answer is correct pleas
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
??
@S.Hi
Can you help me with “passleader 300-101 489q”
I wrote you a mail..
If anyone else has a good relevant dump – plsss help :)
spidse at gmail dot com
@S.HI the answer is A
Hi, can anybody tell us where do I find the LAB sims for the exam ? Please advise.!
Confirming the 21q dumps are valid.
A network engineer needs to verify IP SLA operations on an interface that shows an indication of excessive traffic. Which command should the engineer use to complete this action?
a. show frequency
b. show track
c. show reachability
d. show threshold
@Scammers be gone!
Thanks a lot dear…very much appreciated.
Hi guys, passed route today. v1.5 still valid. All D&D and labs are here.
Thanks to all for your hard work!
any one know the exactly the answer ?? because some people say A and other people say D !!!
wich answer is correct pleas
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
??
Passed today Comfortably. deff v1.5 (all 477 of them) covers the questions and the Sim, Labs drag-drop are all here. Had the two sims, PBR EIGRP and the redistribute. Did go through the PassLeader dumps too. (be aware a few question the answers differ from Digitaltut. But does have some of the new questions I it.
Note on the redistribute, had the Fast-Ethernet link so did the Distance command, no change to route, but the OSPF routes would not change, did clear ip route commands on all routers still nothing changed showed had been learned over 16mins ago, so who knows. Did ping and trace and ping was 1msec so not bad for 3 hops. would not change from R1-R2-R3-R4 path.
was some random question about MPP. Don’t remember seeing that anywhere.