Share your ROUTE v2.0 Experience

@Everest 74

http://www.getnetworking.net/tutorials/frame-relay-point-to-multipoint

Hi all
read the feedback :)

__________________
pass exam now

thanks alot for your help

you dumps 80% valid
lab eigrp stub redistributed ipv6

darg and drop from your dumps >>> coop dd little different

thanks alot

@Anon
let me which question?

@Mister Router
congratulations I am happy to hear :)

@A7MEDDD
congratulations I am happy to hear :)

@kot…..Bingo!

@nneettwwrrookkiinngg
@All

Q142
Which three NTP features can be deduced on the router? (choose three)
A. only accepts time requests from 192.168.1.1
B. only handle four requests at a time
C. only is in stratum 4
D. only updates its time from 192.168.1.1
E. only accepts time requests from 192.168.1.4
F. only updates its time from 192.168.1.4
Ans: A,C,F

1) Peer – permits router to respond to NTP requests and accept NTP updates. NTP control queries are also accepted. This is the only class which allows a router to be synchronized by other devices.
2) Serve – permits router to reply to NTP requests, but rejects NTP updates (e.g. replies from a server or update packets from a peer). Control queries are also permitted.

Q 169
Which two reasons for IP SLA tracking failure are likely true? (Choose Two)
A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the RI LAN network is missing in R2.
D. The default route has wrong next hop IP address.
E. The threshold value is wrong

Ans: A,C or C,E?

@Very hard working
Cihan bana ulaş

@Anonymous
I don’t have gns real simulation yet
I will create it

I need the latest dump ?

how do I find it ?

@kot
Which three NTP features can be deduced on the router? (choose three)
A. only accepts time requests from 192.168.1.1
B. only handle four requests at a time
C. only is in stratum 4
D. only updates its time from 192.168.1.1
E. only accepts time requests from 192.168.1.4
F. only updates its time from 192.168.1.4
Correct Answer: ACE

vceguide.com/which-three-ntp-features-can-be-deduced-on-the-router/

@saji
Please Don’t Sleep
:)

Q 188
Which option is one way to mitigate symmetric routing on an active/active firewall setup for TCP-based connections?
A. performing packet captures
B. disabling asr-group commands on interfaces that are likely to receive asymetric traffic
C. replacing them with redundant routers and allowing load balancing
D. disabling stateful TCP checks

Correct Answer: D or A?

Take a look at the link
vceguide.com/which-three-ntp-features-can-be-deduced-on-the-router/

-only accepts time requests from 192.168.1.1
-only is in stratum 4
-only updates its time from 192.168.1.4

In your dump file:
-only accepts time requests from 192.168.1.1
-only is in stratum 4
-only accepts time requests from 192.168.1.4

@kot
Q 188 is D

______
fixed the answer

-only accepts time requests from 192.168.1.1
-only is in stratum 4
-only updates its time from 192.168.1.4

Q 184/195
When unicast reverse path forwarding is configured on an interface, which action does the interface take first when it receives a packet?
A. it verifies that the source has a valid VEF adjacency.
B. It checks the egress access lists.
C. it verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists.

and

What’s uRPF checking first when the packet enters the interface? OR When unicast reverse path forwarding is configured on inter interface?
A. it check the ingress access list
B. it check the egress access list
C. Route available in FIB ot it verifies a reverse path via the FIB to the source
D. it verify that the source has a

Correct ans: it check the ingress access list

http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.pdf

@nneettwwrrookkiinngg

Thanks

@nneettwwrrookkiinngg

I assume also if you change a file now to a newer version the link will change which it didn’t previously. Sorry but it seems a wrong move to me unless you are trying to get rid.

@kot
so I shared my drive
deletep old file and upload new file :)
don’t worry bro

@all
Updated files
no new q
just fixed answers

good luck

@nneettwwrrookkiinngg

Ok,
Thank you for your answer.
Well, thank you for rushing that through.

http:// freecram.com/ question/Cisco.300-101.v2018-04-03.q188

http:// freecram.com/exam/ 300-101-implementing-cisco-ip-routing-e6956.html

@mda piss off we don’t need you

@kot @ everest 74 @ nneettwwrrookkiinngg

thanks for your informations .

Re-Posting to see if anyone can help………So, of those who have taken the test, are the DND strict about order? I have been able to know what goes where but not always the order of what is in “networks” dump.

@Everest 74
fyi

drive.google.com/drive/u/0/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

Thanks @nneettwwrrookkiinngg,if I pass this thing on Wednesday I will raise my glass to you!

What is the purpose of the following configs: (Can’t remember the entire question)
Interface gig 0/1
vnet trunk
ip address 192.168.0.1 255.255.255.0
vnet name cisco

CAN any 1 ans this question pls

Hi All,

Sorry for the spam, can someone help me with this question :D

QUESTION 195 What’s uRPF checking first when the packet enters the interface? OR
When unicast reverse path forwarding is configured on inter interface?
A.it check the ingress access list
B.it check the egress access list
C.Route available in FIB ot it verifies a reverse path via the FIB to the source
D.it verify that the source has a valid VEF adjency

A or C ?

Thanks!

@nneettwwoorrkkiinngg

I have sent to you a mail

I need the latest dump

the gns3 labs are for the macbook?

Hello.
Thanks, everyone for the support and special thanks to @nneettwwoorrkkiinngg @dota @raiden
I passed the route exam today 91x. The last dump updated by @nneettwwoorrkkiinngg 28/07/18 was totally valid. The labs that appeared was (eigrp redistribute to OSPF, Eigrp Stub, and IPV6 OSPF)

https://drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

I´ve got this new question:

Questions go like: which will be the best place to allocate a CISCO IP SLA? (something missing)

– user edge
– provider edge
– distribution edge
– not remember

i chose user edge, not sure if was right

Congrats KroNE, very nice score.
Was the other answer WAN edge? I remember a similar question and that was the answer people decided on.

HI!
Thanks everyone. I´m pass 889. Labs: eigrp redistribute to OSPF, Eigrp Stub, and IPV6 OSPF. Five new question.

new questions:

https://drive.google.com/open?id=0B6JqxmwBi8F0Nnp1QnA3Tk83WXM

Dear all guys,

===============================================

Please kindly share me about your experience with CCNP Routing exam.

Please help share me about CCNP Routing exam with all question & Answer.

Really Thankful,:)

===============================================

@CCNP routing exam

https://drive.google.com/drive/u/0/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

@Nasir

Q 195 What’s uRPF checking first when the packet enters the interface? OR
When unicast reverse path forwarding is configured on inter interface?
A.it check the ingress access list
B.it check the egress access list
C.Route available in FIB ot it verifies a reverse path via the FIB to the source
D.it verify that the source has a valid VEF agency

Correct Answer: A

When unicast reverse path forwarding is configured on an interface, which action does the interface take first when it receives a packet?
A. it verifies that the source has a valid VEF adjacency.
B. It checks the egress access lists.
C. it verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists.

Correct Answer: D

http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.pdf

Which three NTP operating modes must the trusted-Key command be configured on for authentication to operate properly? (Choose Three)

A. interface
B. client
C. peer
D. server
E. broadcast

Correct Answer: B,D,E

enotepad.wordpress.com/2008/08/06/ntp-authentication/

Hi all, what is the DnD ‘framerelay ( a new one )’?

Hi People,

Is the Kikavich dump still valid?

Pls share recent exam sim / lab question

@Nassir
When unicast reverse path forwarding is configured on inter interface?
A.it check the ingress access list
B.it check the egress access list
C.Route available in FIB ot it verifies a reverse path via the FIB to the source
D.it verify that the source has a valid VEF agency

Correct Answer: C

When Unicast RPF is enabled on an interface, the router examines all packets received as input on that interface to make sure that the source address and source interface appear in the routing table and match the interface on which the packet was received. This “look backwards” ability is available only when Cisco express forwarding (CEF) is enabled on the router, because the lookup relies on the presence of the Forwarding Information Base (FIB).
CEF generates the FIB as part of its operation.

@

Q 318
R1 and R2 belong to the RIP routing domain that includes the networks 10.20.0.0/16 and 10.21.0.0/16.
R3 and R4 are performing two-way route redistribution between OSPF and RIP.
A network administrator has discovered that R2 is receiving OSPF routes for the networks 10.20.0.0/16 and 10.21.0.0/16 and a routing loop has occurred. Which action will correct this problem?

A. Apply an inbound ACL to the R2 serial interface.
B. Change the RIP administrative distance on R3 to 110.
C. Configure distribute-lists on R3 and R4.
D. Set the OSPF default metric to 20.
E. Change the OSPF administrative distance on R3 to 110.

Correct ans: D

With the following commands, OSPF routes will be redistributed into RIP. You must specify the default metric to designate the cost of the redistributed route in RIP updates. All routes redistributed into RIP will have this default metric.
docwiki.cisco.com/wiki/Internetwork_Design_Guide_–_RIP_and_OSPF_Redistribution

@300-101
Please read:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.pdf

Are you certain of your answer?
I think correct answer: A.it check the ingress access list

@ Nassir
pardon,
When unicast reverse path forwarding is configured on inter interface?
A.it check the ingress access list
B.it check the egress access list
C.Route available in FIB ot it verifies a reverse path via the FIB to the source
D.it verify that the source has a valid VEF agency

Correct Answer: A because ACLs have been configured

When a packet is received at the interface where Unicast RPF and ACLs have been configured, the following actions occur:

Step 1 Input ACLs configured on the inbound interface are checked.

Step 2 Unicast RPF checks to see if the packet has arrived on the best return path to the source, which it does by doing a reverse lookup in the FIB table.

Step 3 CEF table (FIB) lookup is carried out for packet forwarding.

Step 4 Output ACLs are checked on the outbound interface.

Step 5 The packet is forwarded.

@ kot
1000 TNX

@300-101

i wish you the best of luck and success!

Hi, I passed the exam.
I used nneettwwrrookkiinngg and the old kikavich dumps.
Thanks to nneettwwrrookkiinngg for compiling the questions and also to the other contributors.
copy run start did not work for 2 labs except for 1 (OSPF sim)
There were no new questions, a total of 53Q.