Share your ROUTE v2.0 Experience

Goodluck @Sakote!!

And do update us how you get on.. and possibly what revision material you use?

Sakote,

Good luck my friend.

@Sakote
Good luck. Let us know how it goes

1.Which two statements are true about EVN ?

A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic
C. It can support up to 16 VNs
D. It uses rdistribution to share routers between VNs
E. It supports SSM only.
ANSWER = ?

1. Which can an EIGRP router send when a route goes into the Active state ? (actually the wording was different but i got this question). You had to give 2 answers for this question.
a.query
b.reply
c.request
d.hello
e.update
Correct Answer : ???

3.QUESTION 206 When OSPF is forming an adjacency, in which state, the actual exchange of information in the link ?
A. INIT
B. loading
C. exstart
Answer :?

3.QUESTION 206 When OSPF is forming an adjacency, in which state, the actual exchange of information in the link ?
A. INIT
B. loading
C. exstart
D. exchange
Answer :?

Hi everone

+1 D&D new question
+7 New Select question
Fixed .PDF

New .VCE file is ready for all attend the exam
if you know new questions please sent me a mail
I can add the new vce file
my mail : nneettwwoorrkkiinngg @ g m a i l. com
this is last dump and valid
drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

Update date : 21-07-2118

1. QUESTION 442
2. NEW QUESTION 140
3. DRAG & DROP – 33
4. EIGRP & OSPF Simlets – 8
ALL IN ONE_v1.1

And passed with goood score (9XX)
Labs were the same (old Redistribution, OSPFv6 virtual-link, EIGRP stub), DnDs from dumps.
About 10-12 question were new and 5-7 reworded.
Many thanks to all guys from this forum and digitaltut :)

Which EIGRP packets use unreliable delivery (not 100% accurate)
a.query
b.reply
c.request
d.hello
e.update
Answer C,D

QUESTION 206 When OSPF is forming an adjacency, in which state, the actual exchange of information in the link ?
A. INIT
B. loading
C. exstart
D. exchange
Answer B 100% sure

It was a very easy question (CCNA basic) about EIGRP configuration.
Refer to exhibit:
Two EIGRP routers and NO adjacency -> different AS-numbers/Process-IDs

What is used in EIGRP metric calculation?

A. maximum bandwidth on the path
B. Option about bandwidth
C. average bandwidth on the path
D. minimum bandwidth on the path
Answer D

Reference https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/enhanced-interior-gateway-routing-protocol-eigrp/whitepaper_C11-720525.html
By default, EIGRP uses only the bandwidth & delay parameters to calculate the metric (metric = bandwidth + delay). In particular, EIGRP uses the slowest bandwidth of the outgoing interfaces of the route to calculate the metric as follows:

@doka bro congrats
I am so happy:)
my file is valid? isn’t it

Yes, it’s valid for about 870-880 points IMHO :)

@doka
Great bro :)
I will be help people about valid dump

@nneettwwoorrkkiinnggg

1.Which two statements are true about EVN ?

A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic
C. It can support up to 16 VNs
D. It uses rdistribution to share routers between VNs
E. It supports SSM only.

e and c are 100% wrong so I think

ANSWER = a,b

https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/layer-3-vpns-l3vpn/whitepaper_c11-638769.html

Network virtualization solution EVN:
• Provides a pure IP alternative to MPLS in enterprise networks for up to 32 VNs
• Uses existing enterprise design/architecture/protocols
• Uses existing technology to increase the effectiveness of VRFs
• Provides either an IGP (OSPF, EIGRP) only or IGP/EGP-based alternative Reintroduces familiar concepts for access and trunks to Layer 3
• Can be deployed with traditional MPLS VPNs or MPLS VPNs over mGRE
• Can coexist with Multi-VRF deployments
• Supports non-IP and IPv6 traffic through the EVN global table
• Supports PIM and IGMP with SM and SSM modes for mVPN
• Supports shared services using route replication
• Includes enhanced troubleshooting and usability tools

I think d is wrong because it uses route replication not route redistrribution

Test center is on maintenance today. Have to reschedule my exam tomorrow at 12:30 pm.

Good day fellow colleagues. I appreciate all of your help And support throughout this entire process. This was not an easy route but with the help of your support and me studying I was able to complete the CCMP Cisco exam, particularly the routing. Below are my comments and my opinions of the exam. I would highly suggest that you study the 470 questions and the new 16 questions that was posted on this and support throughout this entire process. This was not an easy route but with the help of your support and studying I was able to complete the CCMP Cisco exam, particularly the routing. Below are my comments and my opinions of the exam. I would highly suggest that you study the 470 questions and the new 16 questions that was posted on this forum a couple days ago. To be honest with you the dumps and the questions did help, but you really need to study the topics and master the questions on the dumps. Unfortunately Cisco has no official documentation or syllabus to say for studying exact topics that are on the exam. None of the Cisco route books that I read would be enough to pass this exam. You need to master the dump and master every topic that is on the dump. There was not a lot of IPv6 questions but to be honest with you the dumps and the questions did help, but you really need to study the topics and master the questions on the dumps. Unfortunately Cisco has no official documentation or syllabus to say for studying exact topics that are on the exam. None of the Cisco route books that I read would be enough to pass this exam. You need to master the dump and master every topic that is on the dump. There was not a lot of IPv6 questions but there were
A lot of IPV four questions. Mainly routings DHCP prefix list and ACL’s. I wish you all the best of luck I continue my journey and we shall meet. Again mastered it up master the questions and master the 15 or 16 questions that was audit added to this for him a few weeks ago then you shall succeed. Just a disclaimer I did fill the exam once and I retook it and mastered the questions and topics and I passed it. The hardest one to me A lot of IPV four questions. Mainly routings DHCP prefix list and ACL‘s. I wish you all the best of luck I continue my journey and we shall meet. Again mastered it up master the questions and master the 15 or 16 questions that was audit added to this for him a few weeks ago then you shall succeed. Just a disclaimer I did fill the exam once and I retook it and mastered the questions and topics and I passed it. The hardest one to me what is the EAGRP to OSPF redistribution.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book.pdf

1.Which two statements are true about EVN ?

A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic
C. It can support up to 16 VNs
D. It uses rdistribution to share routers between VNs
E. It supports SSM only.

According to the link above,IPv6 is not supported except on vnet global and SSM is supported so I’m thinking E and either A (or D)

Hello all,

@Doka and @nneettwwoorrkkiinngg

Which EIGRP packets use unreliable delivery (not 100% accurate)
a.query
b.reply
c.request
d.hello
e.update

Ans: A,B
“Queries and replies are sent when destinations go into Active state. Queries are always multicast unless they are sent in response to a received query. In this case, it is unicast back to the successor that originated the query. Replies are always sent in response to queries to indicate to the originator that it does not need to go into Active state because it has feasible successors. Replies are unicast to the originator of the query. Both queries and replies are transmitted reliably. ”

//www .cisco.com/c/en/us /support/docs/ip /enhanced-interior-gateway-routing-protocol-eigrp/13669-1. html

@nneettwwoorrkkiinngg Please update as well the PDF, there are users (like my self) than can’t install the VCE player. (I don’t own a pc, I use a shared one)

@R’hllor

https://learningnetwork.cisco.com/thread/5833
“EIGRP query and reply packets are used to maintain the diffusing computation. Queries can be multicast or unicast, but reply will be always unicast.
Both always use RELIABLE delivery. Receiver of reply packet needs to send acknowledgement back to confirm the delivery of reply packet.”

Request = ACK
C,D are correct 100% sure

http://www.ciscopress.com/articles/article.asp?p=687478&seqNum=2

“EIGRP uses the following five types of packets:

Hello—Hello packets are used for neighbor discovery. They are sent as multicasts and do not require an acknowledgment. (They carry an acknowledgment number of 0.)
Update—Update packets contain route change information. An update is sent to communicate the routes that a particular router has used to converge; an update is sent only to affected routers. These updates are sent as multicasts when a new route is discovered, and when convergence is completed (when the route becomes passive). To synchronize topology tables, updates are sent as unicasts to neighbors during their EIGRP startup sequence. Updates are sent reliably.
Query—When a router is performing route computation and does not have a feasible successor, it sends a query packet to its neighbors, asking if they have a successor to the destination. Queries are normally multicast but can be retransmitted as unicast packets in certain cases; they are sent reliably.
Reply—A reply packet is sent in response to a query packet. Replies are unicast to the originator of the query and are sent reliably.
ACK—The ACK is used to acknowledge updates, queries, and replies. ACK packets are unicast hello packets and contain a nonzero acknowledgment number. (Note that hello and ACK packets do not require acknowledgment.)”

Sorry, @DOKA and @nneettwwoorrkkiinngg they are two different questions:

1. Which can an EIGRP router send when a route goes into the Active state ? (actually the wording was different but i got this question). You had to give 2 answers to this question.
a.query
b.reply
c.request
d.hello
e.update
Ans: A,B

Which EIGRP packets use unreliable delivery (not 100% accurate)
a.query
b.reply
c.request
d.hello
e.update

ANS D

“For example, on a multi-access network that has multicast
capabilities, such as Ethernet, it is not necessary to send HELLOs
reliably to all neighbors individually. EIGRP sends a single
multicast HELLO with an indication in the packet informing the
receivers that the packet need not be acknowledged. Other types of
packets, such as UPDATE packets, require acknowledgment and this is
indicated in the packet. The reliable transport has a provision to
send multicast packets quickly when there are unacknowledged packets
pending. This helps ensure that convergence time remains low in the
presence of varying speed links”

https:// datatracker.ietf.org /doc/rfc7868/ ?include_text=1

NOTE: Yea, now we have to read RFC to find some answers…..

Well that last @Anonymous
@doka You were right, if its two answers, that’s right!

@R’hllor
Yes bro :)

Which EIGRP packets use unreliable delivery (Choose two)
a.query
b.reply
c.request
d.hello
e.update
Answer C,D

@doka hi bro

you know true answer
upgrading the dump

1.Which two statements are true about EVN ?

A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic
C. It can support up to 16 VNs
D. It uses rdistribution to share routers between VNs
E. It supports SSM only.

Correct Answers : ? ?

Thanks all , I passed , some questions in Exam
https://drive.google.com/open?id=1U-KXJRbFT3yxCLSdKHcgJY-m3SZ3KPju

Hello,
@nneettwwrrookkiinnggg and @Doka

1.Which two statements are true about EVN ?

A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic (maybe, only in vnet global)
C. It can support up to 16 VNs (No. up to 32 VNets)
D. It uses redistribution to share routers between VNs (Might have a typo and is not share routers, maybe is share routes. So although it supports route redistribution, it does not relay only in that technique, it can replicate routes. so I will say this answer is incorrect.)
E. It supports SSM only. (No “Supports PIM and IGMP with SM and SSM modes for mVPN” )

Source for E
// www. cisco.com/c/en/us/products/collateral/ios-nx-os-software/layer-3-vpns-l3vpn/whitepaper_c11-638769.html
Source for C,D
//www.c isco.com/en /US /docs/ios-xml/ios/evn/configuration/15-1sg/evn-overview.html

Hello to everyone, passed today , all the new questions were there, study the new questions of the last 2-3 days from the comments, all these new questions were there, 60 questions in total , DD and labs all from this site with similar ip addresses, don’t forget the ‘distance eigrp 90 105’ for the eigrp ospf redistribute lab , thank you very much all , you are doing amazing job , finally time to go for sleep , good luck to all :)

@nneettwwrrookkiinnggg and @Doka

1.Which two statements are true about EVN ?

A. A configuration can be based on an existing VRF configuration
B. it supports IPv6 traffic (maybe, only in vnet global)
C. It can support up to 16 VNs (No. up to 32 VNets)
D. It uses redistribution to share routers between VNs (Might have a typo and is not share routers, maybe is share routes. So although it supports route redistribution, it does not relay only in that technique, it can replicate routes. so I will say this answer is incorrect.)
E. It supports SSM only. (No “Supports PIM and IGMP with SM and SSM modes for mVPN” )

ANS A B

@R’hllor
I agree with you.
A, B are IMHO correct.
In the exam i have chosen A,D, but according my score for this section… ;)

Hi all,

Several Dumps has this answer, but looking for an explanation I found this post of student in may of this year. Do you have a proper explanation of why it should be AB?

Which two statements about Frame Relay Point-to-Point connections are true? (Choose Two)

A. Changing a point-to-point sub interface to a different type requires the device to be reloaded.
B. They use two DLCIs to communicate with multiple endpoints over the Frame Relay cloud.
C. The device can establish a point-to-point connection to the cloud without a DLCI.
D. They can operate normally without a DLCI map.
E. Each physical interface that extends to the Frame Relay cloud can support a single SVC.

my answer is AD

Source

On point-to-point subinterfaces, you do not need to use the frame-relay map command to perform static address mapping, because it is always assumed that the end point of the point-to-point connection automatically resides on the same subnet as the start point. It is also not required to enable or disable Inverse ARP, because there is only a single remote destination on a point-to-point PVC and discovery is not necessary.

Hello all,

Another question over here:

From @nneettwwrrookkiinnggg dump QUESTION 480

Using new backup router in spite of faulty one in ospf domain but the relationship with a neighbour in one interface only not working, what is the reason of this problem? (Choose Two)
A. area Id match
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
E. MTU mismatch

ANS DE

The problem here is that authentication can be done per-interface basis, so that means that a mismatch only in that neighbour can fail.

The other thing that bothers me is that MTU mismatch doesn’t necessarily block an adjacency to form. I understand that it might reach even the state of Exstart where they start exchanging DBD. In that state, one package can have an MTU bigger than the configured in the other router so it gets discarded and they get stuck in that state.

ANS should be BD.

@doka
Congrats. For the 5-7 that were reworded, was it the questions that were reworded of the answers. Thank you

@doka
Congrats. For the 5-7 that were reworded, was it the questions that were reworded OR the answers. Thank you

the above was an advertisement which might be fake

@nneettwwrrookkiinnggg
Que 568 needs to be corrected.

Passed today 878. Just studied networking dumps

Lab – IPV6, eigrp stub, Portland/Amani (same labs here)
Some new questions but easy. You need to study somehow not study the dumps. Good luck guys. I’m off to last topic. TSHOOT

Which order is correct? Please help.
Question 6
A drag and drop question about Access-List types
Answer: Digital Tut has following order:
reflexive – must be named
standard – range 1300-1399
extended – telnet …
time-based– access to device at certain times
dynamic – closest to device

nneettwwoorrkkiinngg has following order I am writing only points which are different than above:

ACL that uses Telnet for authentication —-> Dynamic
ACL type that should be places closest to the traffic source——> extended

Check for extended and dynamic and let me know which two are correct. thanks

+ Dynamic: ACL that uses Telnet for Authentication
+ Extended: ACL type that should be placed closest to the traffic source
+ Reflexive: ACL that must be defined with a named ACL
+ Standard: ACL numbered from 1300 through 1999
+ Time-based: ACL that applied to traffic only during specifically defined periods

So, kikavich and nneettwwoorrkkiinngg dnd is ok.

Thanks doka

@sakote
congratulations :)
I am happy to hear

@R’hllor
hi bro
I found the answer for the Question

http: // freecram.com/question/Cisco.300-101.v2018-03-12.q260/using-new-backup-router-in-spite-of-faulty-one-in-ospf-domain-but-relationship-with-neighbour-in-one

@R’hllor
I agree with you
Fixed the answer

@CCNP-Exam
hi bro You say Answer C is not correct?

QUESTION 568
One new question about best place to position a netflow server
A. Core edge
B. Access edge
C. WAN edge
D. Distribution edge
E. User edge
Correct Answer: C

Which three NTP features can be deduced on the router? (choose three)
A. only accepts time requests from 192.168.1.1
B. only handle four requests at a time
C. only is in stratum 4
D. only updates its time from 192.168.1.1
E. only accepts time requests from 192.168.1.4
F. only updates its time from 192.168.1.4
Correct Answer: ACE
Section: nneettwwoorrkkiinngg Questions
In .vce answer is ACE instead of ACF

The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6 sources. Which three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks? (Choose three.)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset
what is the Correct Answer ?