Share your ROUTE v2.0 Experience

Another one

Question 1
When OSPF is forming an adjacency, in which state, the actual exchange of information in the link?
A. INIT
B. loading
C. exstart
D. exchange
Answer: C

Loading: Should the local router require complete LSA information from its neighbor, it transitions to the Loading state and begins to send link-state request packets.

ExStart: In the ExStart state, the local router and its neighbor establish which router is in charge of the database synchronization process. The higher router ID of the two neighbors controls which router becomes the master.

Do we have answer for this anyone???

On Premium Questions Quiz, for OSPF:
When OSPF is forming an adjacency, in which state, the actual exchange of information in the link?
A. INIT
B. loading
C. exstart
D. exchange
Premium Questions Quiz says: C. exstart

But Procyber V1.5
It says the answer is B. loading

Which one of these correct, does anyone know? Bit confusing.
Per Cisco “Loading”
“In this state, the actual exchange of link state information occurs”

@koki I reckon its B “LOADING”

Guys i found this here https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html

“Loading

In this state, the actual exchange of link state information occurs. Based on the information provided by the DBDs, routers send link-state request packets. The neighbor then provides the requested link-state information in link-state update packets. During the adjacency, if a router receives an outdated or missing LSA, it requests that LSA by sending a link-state request packet. All link-state update packets are acknowledged.”

any one can share the dumps for 300-101 exam
meme19792017(@)gmail,com

As for actual exchange of information in OSPF. You can find pretty much confusing information on cisco.com…

Exstart
Once the DR and BDR are elected, the actual process of exchanging link state information can start between the routers and their DR and BDR.

Loading
In this state, the actual exchange of link state information occurs.

What is the correct answer? I don’t know… I would chose Exstart.

Just passed today (barely but I’ll take it!). the PL 489Q version is valid. I focused too much on remembering labs and simulations so struggled and forgot about the standard multiple choice questions.

I had 48 questions and the ones I remember are…
1. OSPF lab (Seattle, Chicago, NY)
2. PBR lab
3. EIGRP/OSPF Redistribution lab
4. evaluate EIGRP network
5. evaluate OSPF network
6. DnD – OSPF router types (internal router, ABR, ASBR, backbone routers)
7. DnD – EIGRP functionality (bandwidth mgmt, stubs, authentication, redistribution)
8. DnD – BGP attributes (MED, Local pref, weight)
9. DnD – NAT64,NPTv6 charactiertics
10. DnD – OSPF header (area ID, checksum, router ID, data, etc)
11. DnD – authentication/accounting/authorization
12. DnD – CHAP/PAP
13. DnD – IPv6 (NPTv6, NAT64, well-known stateful, network-specific)
14. DnD – GRE feature (IPSEc, keepalive, mGRE, MSS, tunnel key). PL question 357
15. DnD – loose mode/strict mode
16. DnD – Frame relay components (DLCI, FECN, LMI, PVC, SVC)
17. DnD – IPv6 Traffic filtering/access classes
Multiple choice questions I do remember:
18. What is the NHRP role in DMVPN?
19. What 3 characterisitics are shared by subinterfaces and associated EVNs?
20. Which 3 TCP enhancments can be used with TCP selective acknowledgments
21. Which 3 problems results from application mixing of UDP and TCP streams within a network with no QoS?
22. Which 3 benefits doe the Cisco Easy Virtual network provide to an enterprise network?
23. Which 3 items can you track when you use 2 time stamps with IP SLAs?
24. What is the purpose fo the route-target command
25. Passive-interface question with a diagram where you need to pick which options prevents routing updates from being sent to access layer switches
26. show ip ospf database display and you select what type of OSPF router is router A (ABR is answer)
27. Which 3 IP SLA perfmance metrics can you use to monitor enterprise-class networks
28. Which 2 OSPF network types can operate without a DR/BDR relationship
29. What types of informaiton are displayed when executing “show ip cache flow” command
30. An administrator needs to setup an NTP client to provide updates to local without synchrinizing to server
31. What command is needed to get the ip address assigned form the PPPOE server?
32. In which scenario can assymmetric routing occur?
33. How to setup IP SLA to monitor bandwidth between certain limits
34. Congestion in network. What is the effect on UDP?
35. Which 2 statements about GRE tunnel interface are true
36. After reviewing the EVN configuraiton, a network administrator notices that a predefined EVN, which is known as the “vnet global” was configured. What is the purpose of this EVN?
37. Which 2 protocols can be affected by MPP
38. Which 2 protocols can cause TCP starvation
39. What does a cisco router use as default username for CHAP authentication?
40. Which netflow verison supports MPLS?

Sorry not 48 but this is all I can remember. Good luck to everyone!

@Just Passed
Thank you very much for sharing Q

The DnD doesnt work in the vce file posted a few pages back, you cant show the correct answer.
Nothing happends when you press “show answer”

@JustPassed

Thank you for sharing!

Did you happen to look over any of procybers questions?

@Young Cisco

It looks like D should be the answer!

d. it tags traffic with a virtual network tag at the trunk interface

thanks @Just Passed for questions

Hello Guys,
I just apassed with 9**.
Its me V1.4 is valid. All the questions were from it. Some of them were from the discussion on this page.
Labs were the same as on this website.
I got Eigrp Stub, OSPF EIGRP Redistribute and PBR.
Ospf Evaluation and Eigrp Evaluation were exactly as it is here.

I have vce file and the labs in pdf format too. If anyone needs help leave their id where i can send the stuff from which i studied.
And thanks to everyone on this group who helped.

PS. This is the best time to give CCNP route exam to be honest. Nit a single question outside the dumps.

@Just Passed are you for real all 12 DND showed up in your Exam 99% of the people who took the exam responded with no more than 4 or 3 DnD: Like AAA/ FRAME RELAY / LOOSE-STRICT/ IPv6 TRAFFIC FILTER @ Passed did you encounter these many DND in your exam?

6. DnD – OSPF router types (internal router, ABR, ASBR, backbone routers)
7. DnD – EIGRP functionality (bandwidth mgmt, stubs, authentication, redistribution)
8. DnD – BGP attributes (MED, Local pref, weight)
9. DnD – NAT64,NPTv6 charactiertics
10. DnD – OSPF header (area ID, checksum, router ID, data, etc)
11. DnD – authentication/accounting/authorization
12. DnD – CHAP/PAP
13. DnD – IPv6 (NPTv6, NAT64, well-known stateful, network-specific)
14. DnD – GRE feature (IPSEc, keepalive, mGRE, MSS, tunnel key). PL question 357
15. DnD – loose mode/strict mode
16. DnD – Frame relay components (DLCI, FECN, LMI, PVC, SVC)
17. DnD – IPv6 Traffic filtering/access classes

@Passed @all in OSPF & EIGRP Redistribution Lab when you have Ethernet connection between R2 & R3. please correct me if I am wrong. you still need to use S0/0 on R2 that is link to R4 in OSPF area to do the distribution & F0/0 between R3 & R4 to do the redistribution and then for the packet to choose Ethernet path we include Distance Eigrp 90 105 on R2 so the Ethernet patch can be choosen over the serial path. I am right?

I read Someones comment before was mentioning you need to get the metric for f0/1 facing R3 & get metric of F0/0 on R3 facing R4 I know I need to get the metric of interface linked with R4 but I don’t think we need to do metric redistribution according to the interface on R2 facing R3. can someone please who took the exam can confirm. Thanks

@Passed & @all Please correct me if I am wrong please regarding Distribution Lab in the exam

config for Ethernet connection. Did you do this? of course the process ID is gong to be different it is used as an example here. I am correct?

R2(config)# router ospf 1
R2(config-router)# redistribute eigrp 100 metric-type 1 subnets
R2(config-router)#exit
R2(config-router)#router eigrp 100
R2(config-router)#redistribute ospf 1 metric 1544 2000 255 1 1500 —-> metric of the Serial link to R4 S0/0
R2(config-router)#distance eigrp 90 105
R3(config)#router ospf 1
R3(config-router)#redistribute eigrp 100 metric-type 1 subnets
R3(config)#exit
R3(config-router)#router eigrp 100
R3(config-router)#redistribute ospf 1 metric 10000 100 255 1 1500 —> metric on the Ethernet F0/0 link to R4

Please send me some vce or pdf question regarding 210-255 exam, cyberops.
peptea69 (@) yahoo com

Passed today!

The 1.5v is still valid!
Only one new question:

Which two features RADIUS combine(choose 2)?
A.telnet
B.SSH
C.Authenticaion
D.Authorization
E.Accounting

not sure of the correct answer

The simlets:
EIGRP
OSPF

The simulations:
PBR – the IP was 10.1.100.2, but I added “route-map pbr permit 20”
Redistribution – the ospf id was 1 and the eigrp was 100
OSPF – the process id was 8 and the area was 14

Good luck to all!

can someoen send me V1.4 or V1.5 please ?

id-bejjany at hotmail dot com

please for all how took the exam what are the DND that you faced because this dump have 62 DND included

@KKK Congrats
Please correct me if I am wrong please regarding OSPF EIGRP Redistribution Lab in the exam
config for Ethernet connection. Did you do this?

R2(config)# router ospf 1
R2(config-router)# redistribute eigrp 100 metric-type 1 subnets
R2(config-router)#exit
R2(config-router)#router eigrp 100
R2(config-router)#redistribute ospf 1 metric 1544 2000 255 1 1500 —-> metric of the Serial link to R4 S0/0
R2(config-router)#distance eigrp 90 105
R3(config)#router ospf 1
R3(config-router)#redistribute eigrp 100 metric-type 1 subnets
R3(config)#exit
R3(config-router)#router eigrp 100
R3(config-router)#redistribute ospf 1 metric 10000 100 255 1 1500 —> metric on the Ethernet F0/0 link to R4

@kkk Did you use the metric from Serial interface on R2 link connected to R4 for the redistribution and Fa0/0 metric on R3 the link that is connected to R4 or you used the metric of the interface Fa0/1 on R2 the link to R3 instead of using the metric of Serial S0/0 interface.

Please send me a latest valid CCNP(Route) Dumps on {email not allowed}

i have updated dumps which was valid on may , 2017. Can any one advice how many question changed since May?

Hello if anyone has ROUTEv1.5 in PDF version plz send on nitish3008(@)gmail(dot)com

Will the DnD question’s options also be shuffled in the exam or come similar to Dumps.

Your response will be appreciated. :)

@Anonymous
the ‘distance eigrp 90 105’ goes to the R3 confing

the metrics of the interfaces going to R4 – S0/0/0 on R2 and F0/0 on R3

@Passed please send the info to “maximmbox-in @ yahoo com” – no spaces

Can someone please please provide the link to procyber vce or valid sumps

@kkk Thanks for your help!

Authentication and Authorization

RADIUS combines authentication and authorization. The access-accept packets sent by the RADIUS server to the client contain authorization information. This makes it difficult to decouple authentication and authorization.

For VCE Procyber Check here

https://drive.google.com/open?id=1uetIqDkl8shjUR6yruZtmPWNyAR64m1q

Digitut mbana (thanks)oh, Wrote the exam yesterday the Vce shared by itsme still 100% valid
Labs/Sims:
– OSPF sim
– Route-map sim
– EIGRP sim
– Redistribution
DnDs: Frame-relay, NAT-PT/NAT64/Network specific/Well-known, Access-lists, Authentication/Authorization/Accounting, mGRE/IPSec/Keepalive/TunnelKey, uRPF loose/strict, IPv6 traffic filter/access filter.

Just pass this exam few hours ago, completely relying on digitaltut. There are about 6-8 questions that I have never seen before, but others (SIM and other questions) are identical with digitaltut. Passed with 868/1000.

@CCNP Certified Can you please tell me what are those new questions?

@CCNPcertified— Congrats
Which questions u referred which is digitaltut or procyber 1.5 VCE ? plz reply i have my exam scheduled on this saturday thanks.

!!!

Ado ponna wanniyaka tho srilanka kiyala dannava ponnaya. ubta business karanna onanam pare karapang… uba mehe digital tut eke thiyana ewa arang uba vikunanna epa.

vikunanawanam thoge geniya vikunapang ponnaya. tho kurunegala .

can one please share the latest dumps of 300-101 at suffianmanzoor @ gmail com

Thanks in advance.

Hi, just wanted to thank you for contribution, this site really helped me to pass my exam. I got real good score, no big surprises, just be careful with OSPF evaluation lab cause it can happen that interface numeration does not match with router configuration. Good luck

Passed – Thanks a lot to ProCyber, It’s me and whoever contributed :)

Both simlets present (Under OSPF simlet I had to put neighbor as an answer and not the timers) + PBR, Redistribution and OSPF SIM

Score 9xx – VPN questions are the one which needs to be reworked the most and to correct answers there.

pls whats the correct answer here-q233 passleader

A network engineer enables OSPF on a frame relay Wan connection to various remote sites, but no OSPF adjacencies came up.Which two actions are possible solution for these issue. choose two

A.change the network type to point to multi point under Wan interface
B.Enable Virtual links
C.Change the network type to non-broadcast multi-point access
D.Configure the neighbor command under OSPF process for each site
E.Ensure that OSPF number matches among all remote sites

@elslimmy the answer is A and D

In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP

Please confirm the answer?

@nick Answer is A

which one i can completely rely on ? Passleader 470 questions or Procyber itsme 1.5 vce or questions in Digitaltut Premium membership ?

Plz reply i have exam scheduled tomorrow……….

because i am seeing for some of the questions answers are different in all 3 of this.

@nick
I would chose option A.

Digitaltut has an explanation of option D but it’s a bit sophisticated from my point of view. Please find it below.

R1 and R2 are the two routers in the local internal LAN network that are running VRRP. R1 is the master router and R2 is the backup router.
These two routers are connected to an ISP gateway router, by using BGP. This topology provides two possible outgoing and incoming paths for the traffic.
Suppose the outgoing traffic is sent through R1 but VRRP failover occurs, R2 becomes the new master router -> traffic passing through R2 instead -> asymmetric routing occurs.

plz reply…………….

If there is no simulation in vce file, please let me know where you can see it.

If you send simulation information to my e-mail address, I will give 0.001btc.

ocd01002 (at) naver.com