Share your ROUTE v2.0 Experience

Which two areas does OSPF send a summary route by default ? (Choose two)

A. NSSA
B. Backbone
C. Totally stubby
D. Stub
E. Normal

According this document
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13692-21.html
are answer C,D correct
“In stub and totally stub areas, the ABR to the stub area generates a summary LSA with the link-state ID 0.0.0.0. This is true even if the ABR doesn’t have a default route of its own. In this case, you don’t need to use the default-information originate command.”

Come on, the command to make Totally stubby is literally NO-SUMMARY, why on earth would it send a summary route

Hi team, anyone with idea which easier exam to do just to re-certify ccnp. I would appreciate if you can provide latest valid dumps for the exam.

@Bonsai
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/6208-nssa.html
Default Summary Route

By defining an area as a NSSA totally stub area, the NSSA ABR generates a default summary route. As mentioned, if the NSSA area were not defined as totally stub, then a default summary route is not generated by NSSA ABR. This configuration generates a default summary route for a NSSA totally stub area.

@wnet all the best !!

hello,

which dump is valid?

Can anyone provide a link to the 440q dumbs which are supposed to be valid ? I have tried to find it on google search for about 30 minutes without success.

Hi Guys,

failed exam the other day by 40 points! :-( had a lot of ipv6 questions, DHCP, framerelay, COPP MPP DND’s + 3-4 other DND’s, 3 labs EIGRP STUB, OSPF/EIGRP Redistribute SIM, OSPF IPV6 virtual link. my tip would be know the concept of the route blueprint topics, don’t rely on these dumps use them as a guide, as cisco can use a pool of 1000’s of questions. labs are valid on here (practise them all so you can do them in your sleep) all you guys who put the effort in to creating dumps I take my hat off to you SIR’s!! I used official cisco books, INE Vid’s, Jazzy dumps (most of my questions came from this) and kikavich oing to re group and try again in a few weeks……. good luck all

Hi Guys,
I had 2 questions on concept below . Which is on CEF XOR, or . I could not be able to memorize entire que.
https://www.cisco.com/c/en/us/support/docs/ip/express-forwarding-cef/116376-technote-cef-00.html

Hi Guys, passed with 9xx ))) . 5-6 new questions (i cant remember : one about authentication with local aaa : 2 choices : limited nbre of user or occur before requiring radius and tacacs+ or occur only when there is no server to authenticat )
Dump in pages (160 -165) and networker dump are valid)
Labs are still valid : OSPF with anly new process id , eigrp stub, ospf/eigrp redistribute with (distance eigrp 90 105)
dnd still valid: LMI address registration .. ACL , urf (strict and loose mode)

Questions i can remember
There is no COPP and MPP
2 qs about Enable secret (from dumps)
Port blocked GRE tunnel
Port ripng
Ospf in fr
Type lsa when redistribute eigrp in ospf
Invalide option when redistribute eigrp in ospf
Ospfv3 lsa
Configure dhcp relay in vlan
Dmvpn phases spoke to spoke
DHCP offer , ack , discover request
CEF
EVN : simplified L3 etc
SNMPv3 : encryp
Route target vrf-lite (manage import expor ..)
Vrf definition customer
How does an EVN provide end-to-end virtualization and separation of data traffic from multiple networks?
A. It tags traffic with an 802.1q tag at the edge interface.
B. It tags traffic with an 802.1q tag at trunk interface.
C. It tags traffic with a virtual network tag at the trunk interface.–> correct answer
D. It tags traffic with a virtual network tag at the edge interface

Good Luck to everyone !!!

@route 300-101
congrats !

Hello!

Last week I took an exam from route. It was passed.
I used the official guide to learn the material. Some topic is missing from this guide such as IPv6 NAT, GRE and frame relay. I suggest you to learn these topic also, because a lot of questions come from this topic.
I used these dumps: kikavich477, jazzy dumps V3, jazzy DNDs.
There are not enough to the exam because some new questions appeared. You can find these around on page 156.

I wish you the best!

Hello,

route300-101 congratz!

May you send me d u m ps ?

k2far4me at hotmail.com

thank you

I cant paste the links

Link of nneettwwrrookkiinnggg (most valide) July 16th, 2018 (page 167)
links of NP July 16th, 2018 page 166

@route300-101
explain me what is mean OSPF with anly new process id ?

@Route 300-101:

Congrats!

Did you get a question about types of OSPFv3 LSA types? Type 8 and 9?

@Zam2u, I believe the 30Qs you added can be seen on the Qs 101-200 of the jazzy477, but I can see some questions that have different answers from the previous set. If these questions have been discussed here I’ll take the answers from your version as they were more updated. All other questions have same answers as the questions found on the jazzy477 one.

these are the questions you brought up that have different answers to the previous one:

Q52. A network engineer recently deployed Easy Virtual Networking in the enterprise network. Which feature improves shared services support?
A. route replication
B. edge interfacing
C. tunnel feedback.
D. route distinguishers
Correct Answer: A

Q62. In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Correct Answer: D

Q36. Which BGP option is required when load sharing over multiple equal-bandwidth parallel from a single CE router to a single ISP router over eBGP?
A. eBGP Multipath
B. eBGP Multihop
C. BGP Synchronization
D. Public AS numbers

Answer: A

^ which I will be adding to the current vce file i’ve been using. i’ll also be adding Qs 64 (HOW DEFAULT route config?) and 66 (CoPP DnD)

also, can someone help me and verify this vce i’ve created? some are saying they can’t open the vce file on their end. I’ve tried it on mobile too and its also not opening. But I can play it here on the laptop where i created it.

here’s the link for the vce file i’m using:
mega.nz/#!JNAEACBC!Eu61ViveUuT99JjDUtzCuCb1eMpSjKptkrJsyWGUdZ0

PS some Qs (about 3-4) can’t be seen on 101-200 of Jazzy477 but still scattered on the remaining 201-464Qs of the same file. (i’m referring to the jazzy 477_formatted.vce)

The link for the GNS3 labs, can be used in the latest version of GNS3

https://drive.google.com/open?id=17Gr5LKiDsSu2_pWn-xb7iMQxTVWnN0m6

same addresses they changed only the id process number of area stub. the question about lsa ospfv3 ask the type of lsa local link giving the choices lsa3 lsa4 lsa8

@route300-101
do you mean changed area number or ip address ?

@route300-101, which dnd are there where can i get these LMI address registration .. ACL , urf (strict and loose mode).

i think route300-101 is referring to area ID on ospf lab. End game = always know what area ID the routes are configured, not just memorize everything digitaltut has provided us. show commands should be available.

LSA type 8 is used for OSPFV3 local links, similar to LSA type 1 for IPV4 OSPF.

yes area id. the show commande are available instead of copy running-config start

copy running-config start is available in one lab (ospf )

@route300-101, which dnd are there where can i get these LMI address registration .. ACL , urf (strict and loose mode).

Please post will be starting in a few minutes

@route300-101
Thanks

@route300- 101:

Did you get any question(s) on CEF load-balancing feature X-OR?

dnd https:// drive . google.com/drive/folders/1UyTdhAq3k2qn-pOwZ41Bpv-FmA7rmKgu
q 1 q 16 q 20

@route300-101, thank you a lot.

I get the question show ip cef –>cef cannot switch packet for this route and passes it to the next Best switching methode

You’re welcome
good luck for All!!

route300- 101 must be referring to this question on jazzy477:

Question: 188
What is indicated by the show ip cef command for an address?
A. CEF is unable to get routing information for this route.
B. CEF cannot switch packet for this route and passes it to the next best switching method.
C. A valid entry and is pointed to hardware based forwarding.
D. CEF cannot switch packet for this route and drops it.
Answer: B

>If you still have time before your exam, please scan Jazzy477. Besides the 40 real new Qs that has been collated the past few days, you will see all others in its old section. Even 90% of Kikavich 135q(june) has already been introduced on the 477 dumps.

>If you have been cramming you can proceed to Zam2u’s “TUT New Question-Corrected” which has been posted on p169 since it has the latest set of questions from old dumps that has been sighted by previous exam takers. it’s a quick 66q which was not included on Kikavich all in one by the beginning of this month.

>DnDs should still be valid based on feedbacks from previous takers, CoPP and MPP has been added on Zam2u’s file.

goodluck fellow test takers.

Where can we find the 440q dumps ?

@route300- 101

Excellent news! How many DnDs did you get?

here’s a quick download link of the files i’ve been studying so far (includes both .vce and .pdf / .doc files)

//mega.nz/#F!cIRHFahT!fHHOYa_N4Qx3eHDM0cjmnw

but the materials where most of the questions are:
-jazzy 477.pdf
-jazzy 477_formatted.vce
-all in one.vce
> 87q section (Only new Q not included in 477)
> 135q section (Kikavich v4 June)
> 67q (Digital tut and Dexter)
> 31 DnD
-Collated July.vce
-TUT New Question-Corrected.docx
-jazzy DNDs.pdf
-ALL DRAG&DROP.pdf

take note most questions from 87q and 135q will also be found on 477, but there will be some trick questions where they add a certain keyword to have a choice altered to a different one so keep an eye on those questions. if you can compare as much as possible please do so. also please use references posted by contributors on this thread. but most updated answers are found on 87q and 135q and Zam2u’s

@Nick 3 dnd: LMI address registration .. ACL , urf (strict and loose mode).

hi all

updated ALL IN ONE v1.1 vce an pdf files (18.07.2018)
I created D&D sames real exam!!!!!

1. QUESTION 442
2. NEW QUESTION 133
3. DRAG & DROP – 30
4. EIGRP & OSPF Simlets – 8
ALL IN ONE_v1.1

drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

@doka where are you bro

I created new vce and pdf files

@everbody
please we need just a dump file
if you know new qaustions please sent my mail
nneettwwoorrkkiinngg @ gmail.com

@nneettwwrrookkiinnggg

tyvm for the update.

@raden you are welcome

bu I don’t know COPP MPP D&D true answers
if you know answers please say me

look at in drive
482.jpg

@nneettwwrrookkiinnggg Zam2u provided the answer to copp mpp dnd at
htt p s : //drive . google . com / file / d / 1t6ss4Vjzc12WVtUcDASAzGX5TX5yRotU
it’s the actual dnd pic, if it can help you to update the dnd section on the all-in-one dumps.

@raden ok updated D&D :)
thank you very mutch
when wil you take the exam?

Hi,what DnDs have come up in the exam?

this friday, trying to gather much resource and new ones as possible.

I’ve scanned ur file this week and seen that i have also covered most of the questions. but an updated consolidated file will help most of the newcomers here. gj on updating the all in one file.

@raden

I had spend a lot of time when i create the vce file
i hope you will take it
if you pass I will be happy:)

my mail is nneettwwoorrkkiinngg @ gmail.com

@peter

last dump is
drive.google.com/drive/folders/1Cf4MHTm8Qt5-_jYzJt6PXNy6b6YOBEx1

v1.1 inclued D&D Questions.

Q38. Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key role over to work correctly?
A. SMTP
B. SNMP
C. Password
D. Time

Answer: D

A configured time (NTP) and a working EIGRP configuration need to be available for EIGRP authentication to work.
https://www.cisco.com/c/en/us/support/docs/ip/enhanced-interior-gateway-routing-protocol-eigrp/82110-eigrp-authentication.html

@DataRT
I agree with you :)
true answer in new vce file