Share your ROUTE v2.0 Experience

@dzzz you are talking about this one??

A network engineer executes the commands logging host 172.16.200.225 and logging trap 5. Which action results when these two commands are executed
together?
A. Logging messages that have a debugging severity level are sent to the remote server 172.16.200.225.
B. Logged information is stored locally, showing the sources as 172.16.200.225
C. Logging messages that have any severity level are sent to the remote server 172.16.200.225
D. Logging messages that have a severity level of “notifications” and above (numerically lower) are sent to the remote server 172.16.200.225
Correct Answer: D

@A@W i am using kikavich all in one.you will find link in previous pages

or like this

The network engineer types the follow commands in a router:
logging host 172.16.10.12 logging trap 5
What do these commands do?
A. Export messages of notifications for an external server
B. Show notifications in CLI
C. Sends info to host 172.16.10.12 with notifications less than or equal to 5
D. Sends info to host 172.16.10.12 with notifications greater than or equal to 5
Correct Answer: C

@networker
Thanks for Replying :)

Please, to those that passed the exam, was this question asked:

Question about IPv6 EIGRP features? (Choose Two)
A. scaling
B. Windows Update
C. Unix Update
D. partials updates

Hi all, Passed last week with 87X/1000

The materials that I studied are
– kikavichv4 June
– ALL DRAG&DROP
– jazzy dumps v3
-jazzy DNDs
-question from page 153 onwards

10-15 new questions but not that hard.

5-6 DNDs not sure. I got two of Authentication, Authorization, Accounting, RADIUS, TACACS+ and the choices are TCP, UDP etc. (quite easy)
also the one with configuration of multipoint frame-relay in the ALL DRAG&DROP

3 Labs. Redistribution, OSPF Virtual-link, EIGRP stub

@DataRT

I didn’t saw this question in my exam.

Hi Guys,
Like i said last week, i went to retake the route exam on saturday and passed with 85x/1000. the kikavichv4 June is very valid. kindly get that along with the questions here at digitaltut.com. thank you so much guys for all the updates given here. the sims are still very valid. study them all. i have almost same questions as the first which i had 75x/1000. I am going to take some time to rest and head for my TSHOOT. i already had my Switch earlier this year. Once again thank you guys for all the updates and information here. Digitaltut.com a say a big thank you again. See you guys at the top.

I had 60 questions in all.

3 Labs —- OSPF and EIGRP redistribution, EIGRP Stub and OSPF Stub.
4 DND. AAA, Frame-relay new one, TACACS+, Adverse network conditions
Meanwhile, one of the labs accepted the copy running config startup config. so i will advice we always take this command and let it come up with the command not implemented before we move on to the next question.

@SogSAX@CCNP Congrats.any new question you have faced?

@SogSAX@CCNP Congrats.any new question you have faced?

@ networker, Thank you. can you forward your email. I will send you the kikavichv477 June pdf file that i have. with that and questions here on digitaltut.com, you are good to go.

@networker,

The questions below from the Jimmy which were also at the kikavick were all almost out. Though i have my reservation over the correct answer to some.

Q1.
which purpose of the AAA accounting feature is true when you use TACACS+ authentication ?
a. It prompts users to change their passwords when they expire
b. it saves a timestamped record of user activity
c. it controls the activities that the user is permitted to perform
d. it verifies the user identity.

Ans: B

Q2.
Which command configure a default authentication list that uses a local database and a case-insensitive username ?
a. aaa authentication exec CONSOLE group local-case if authenticated
b. aaa authentication login CONSOLE group local
c. aaa authentication login default group local
d. aaa authentication exec default group local-case

Ans: C

Q3.
Which task you perform to enable a point-to-point Frame Relay connection ?
a. Configure the encapsulation type
b. Disable inverse ARP
c. Enable inverse ARP
d. Configure static address mapping

Ans: A

Q4.
If device R1 has 1-Gigabit and 10-Gigabit Ethernet interfaces, which command do you enter so that it takes full advantage of OSPF costs ?
a. R1(config-router)#auto-cost reference-bandwidth 10000
b. R1(config-router)#auto-cost reference-bandwidth 10000000000
c. R1(config-if)# ip ospf cost 10000000000
d. R1(config-if)# ip ospf cost 10000
e. R1(config-route-map)#set metric 10000
f. R1(config-route-map)#set metric 10000000000

Ans: A

Q5.
In which two areas does OSPF send a summary route by default ?
a. NSSA
b. Backbone
c. Totally stubby
d. Stub
e. Normal

Ans: D, C

Q6.
Which LAN feature enables a default gateway to inform its end devices when a better path to a destination is available ?

a. HSRP
b. ICMP unreachable messages
c. ICMP redirects
d. Proxy ARP

Ans: C

—————————————————————
1.Which three methods can a network engineer use to fix a metric based routing loop in the network.
a. Implement offset lists at network boundaries
b. Filter routes manually using distribute lists
c. Filter routes manually using prefix lists
d. Implement proper network summarisation on key routing points
e. Filter routes based on tags
f. Utilise root database filters
Ans: A, B, E

2.Which two features ara added in MSCHAP Version 2
a. Backwards-compatibility with MSCHAP version 1
b. Using the MD5 hash for stronger security
c. Ability to change an expired password
d. using 3 way handshakes for authentication
e. mutual authentication between peers
Ans: C, E

4.What is the default authentication in RIPv2 when authentication is enabled
a. SHA1 authentication
b. Enable password authentication
c. Plaintext authentication
d. MD5 authentication
Ans: C
—————————————————————
1. Where must a network engineer configure the ip helper-address command on a router
a. On the interface that will receive the broadcasts
b. On the DHCP configuration
c. the interface that is closed to the destination DHCP server
d. on the global configuration mode
Ans: A

2. Which feature can be used to reduce the number of ICMP unreachable message egressing a router
a. uRPF
b. ICMP rate-limiting(upendra)
c. ip unreachables command
d. Asymmetric routing
Ans: B

3.What happens when a router receives a route with an administrative distance of 255
a. The router installs the route as the most preferred path in the routing table.
b. The router installs the route as the least preferred path in the routing table
c. The router becomes the feasible successor for the route
d. The router is unable to install the route into the routing table
Ans: D

4. A network access serve using TACACAS+ for AAA operations receives an error message from the TACACS+ server. which action does the network access server take next ?
a. It attempts to authenticate the user against RADIUS
b. It restarts and attempts to reconnect to the TACACS+ server
c. It rejects the user access request the
d. It checks the method list for an additional AAA option
Ans: C

1. multicast application must be accessible between sites, but not be accessible outside of the organisation. Based on the scoping requirements, the multicast group address for the application will be allocated out of which range ?
a. FF00::/16
b. FF08::/16
c. FF02::/16
d. FF0E::/16
Ans: B

2. Which routing protocol searches for a better route through other autonomous systems to achieve convergence ?
a. Link-state
b. Hybrid
c. Path vector
d. Distance vector
Ans: C

3. What are the two benefits of BGP peer groups
a. support groups of paths
b. A configuration change can be applied simultaneously to all peers in the peer group
c. optimize backdoor routes
d. updated via multicast
e. each neighbour in a peer group can have different inbound BGP Policies
f. they use soft updates to minimize bandwidth consumption
Ans: B, F

4. true statement about conditional debugging
a. limited to Ethernet, serial, and multilink interfaces
b. generates debug messages only for packets entering the router
c. limit the output to a specific interface
d. support only one condition at a time
Ans: C

5. VPN support for IPv4 and IPv6 address families. Which command enables a VRF that supports these requirements?
a. Router(config-vrf)#route-target 004:006
a. Router(config)#ip vrf CUSTOMER
a. Router(config)#vrf definition CUSTOMER
a. Router(config-vrf)#rd 004:006
Ans: C

6. what are the two correct statements about enable secret and enable password command
a. the enable password command has a strong encryption algorithm than enable secret
b. if both commands are missing from the global configuration, vty lines use the console password
c. the enable secret command is backwards compatible with more versions of IOS
d. the enable secret and enable password commands must be used together
e. the enable secret command overrides enable password
Ans: C, E

7. Which feature is supported with stateful NAT64 ?
a. IP multicast
b. NAT44 and NAT64 on the same interface
c. VFR
d. FTP and ICMP on an application layer gateway
Ans: C

8. which of the following situations results in a routing loop ?
a. when you have a single point of redistribution
b. when you use NAT translation on the edge of your network
c. when you implement contiguous IP routing blocks
d. when you implement noncontiguous IP routing blocks
e. when you have multiple points of redistribution
Ans: E

1
Which two tasks must you perform to configure a BGP peer group ?
a. Configure the soft-update value
b. Set the advertisement interval
c. Assign neighbours to the peer group
d. Activate each neighbour
e. Activate the default route
Ans: C, D

2
which DHCP option enable to permit static routes in a DHCP environment ?
a. option 33
b. option 67
c. option 13
d. option 66
Ans: A

3
which condition prevents the establishment of a DMPVN tunnel between two spokes ?
a. HSRP is enabled on the spoke devices
b. IPsec is enabled on the spoke devices
c. the two spokes are behind different PAT devices
d. the two spokes have different tunnel keepalive settings.
Ans: C

a question for RIPv2 how long a static route remains if the point to point interface is down.
a 30s
b 60s
c 180s
d 240s
Answer: D (flush time)

In which state do DR and BDR establish adjacency with each OSPF router in the network?
A. Init State
B. Exstart State
C. Exchange State
D. Loading State
ANS: B

1. HOW DEFAULT route config?
a- IP ROUTE command directs to next hop
b- IP ROUTE command directs to next hop and interface
options c and d

ANS: A ?

2. how ospfv3 make neighbourship ?
a- ipv6 neighbourship along with ipv4 router-id (something like that…)
b- ipv6 neighbourship under interface command.
Can’t remember option c & d.
ANS: A, B ???

@SogSAX@CCNP (engr dot husni at gmail dot com)

@SogSAX send me also please studyroom1 @ gmail com

@SogSAX send me also please fasto123 @ yahoo com

Thanks for posting!!!

Please kinldy share the premium version of Pass Leader 300-101 dumps, new version please!!!

Thanks in advance!!!

@ networker, raja and fasto,

please confirm you already have all the questions from digitaltut.com so i can filter it.

i am in the office now but you will get it on or before COB guys. i am collating them.

@SogSAX@CCNP thanks dear.I have kikavich all in one(564q) and kikavich v4(135q).can you please go through questions and filter out questions for us.It will be a humble help.

Guys I have a question,

I want to do my practise in GNS3 with CISCO VIRL (https :// learningnetworkstore . cisco . com /virtual-internet-routing-lab-virl/cisco-personal-edition-pe-20-nodes-virl-20). Is that possible? I have already installed GNS3 VM in VMware, what kind of image do I need. If someone has the links to download the images and a full tutorial it would be great.

I have manage download some files that has the following extention:
vIOS-15.4(2)T1-26-Jun-14.vmdk
vIOS-15.4(2)T1-26-Jun-14.vmsd
vIOS-15.4(2)T1-26-Jun-14.vmx
vIOS-15.4(2)T1-26-Jun-14.vmxf

vIOS-L2.vmdk
vIOS-L2.vmsd
vIOS-L2.vmx
vIOS-L2.vmxf

asav952-204.qcow2
csr1000v-universalk9.03.17.00.S.156-1.S-ext.qcow2
csr1000v-universalk9.16.2.2-ext.qcow2
iosxrv-k9-demo-6.0.1.qcow2
titanium-final.7.3.0.D1.1.qcow2
vios_l2-adventerprisek9-m.vmdk.SSA.152-4.0.55.E
vios-adventerprisek9-m.vmdk.SPA.156-2.T
xrv9k-fullk9-x.qcow2-6.0.1

I am stuck and I want to use it to do the practical part of the course in PluralSight.
Plz help me and in case you don’t know anything about it I encourage you to check the topic, is quite interesting.

Today I passed my CCNP route exam with 845. 60 questions. A few on OSPFv3, Frame Relay, and EVN that I haven’t seen covered here or in dumps. The premium membership here is worth it for the SIMs alone. See you in Troubleshoot.

@SogSAX@CCNP sorry for late reply, I think its because of different timezones, I have kikavich on all in one only.

Hi @Sogsax,

Please send relevant material for route exam.

Abdinasir _ 94 @ hot mail . co . UK

Thanks!!

Pl tell which one is correct. after few hour I will write exam

Q1.
which purpose of the AAA accounting feature is true when you use TACACS+ authentication ?
a. It prompts users to change their passwords when they expire
b. it saves a timestamped record of user activity
c. it controls the activities that the user is permitted to perform
d. it verifies the user identity.

Answer:D or B

Q.2 Which routing protocol searches for a better route through other autonomous systems
to achieve convergence ?
a. Link-state
b. Hybrid
c. Path vector
d. Distance vector

Ans :C or A

@urgent i will go for Q1:b and Q2:C

@urgent please update us after exams and try to remember unseen questions

@SogSAX send me also please jjlawrency01 @ gmail com

@SogSAX can I have it as well ril_christian @ hotmail com

can anyone please share the new kikavich dumps ?

SogSAX@CCNP can you please share the dumps at adhirathlrkapoor @ gmail .com

@SogSAX@CCNP can you please share the dumps at adhirathlrkapoor @ gmail .com

Last day i passed an exam 83*/ . Exam is not difficult as i thought but need to study 477 q , update new question, pass Leader and kikavich dumps questions. Then i saw dnd new questions two, ( Frame relay LMI i never see before and unseen about ten questions) . However, all of sim labs are still valid ,

* 60 Questions
* 4 dnds ( unseen two)
* three sim labs ( eigrp to ospf redistribution , eigrp stub , ospf lab)
Thanks buddha ,

Everyone good luck for your exam.

hi, anyone here with a vce file for the dumps?

Muraji can shard the dump??

i know its not the best platform to ask but has anyone have valid CCSA(checkpoint) dumbs please ?

Hello! I am new on this site. In the last few pages I read about the dumps, but no link for download. Could someone help me with the downloading link? Thank you!

passed with 93X.

same labs and drag drops(no new)

approx 7 new mcq

I have tried to remember some unseen questions

1.
OSPF has R1 router ID 172.18.1.1 . What happens when R1 configure with a new loopback interface IP address 172.17.1.1 ?
a. OSPF chooses 172.17.1.1 as new router ID when R1 is rebooted.
b. OSPF chooses 192.168.21.0 as new router ID when apply new configuration.
c. OSPF chooses 172.17.1.1 as new router ID when apply new configuration.
d. OSPF retains 172.18.1.1 as router ID until interface on which is configured goes down

2.
Which feature eliminates the need for Cisco Express Forwarding to maintain a route cache ?
a. Adjacency table
b. RIB
c. FIB
d. MAC address table

3.
Which condition must be met before two EVN devices can connect ?
a. One VLAN interface must be configured between devices.
b. An EtherChannel configured with at least 2 interfaces connected between the devices.
c. A trunk interface must be configured between devices

4.
Which correct three causes of unicast flooding ?
a. forwarding table overflow
b. changes in STP topology
c. excess space in the forwarding table
d. consistent STP topology
e. asymmetric routing
f. symmetric routing

Today I passed with 94X. Got 6 to 8 new mcq. same labs and same drag and drops.

Above new mcqs are posted by Anonymous, also came in my exam.

Thanks to all

@Anonymous and @urgent Congrats dear.Thumb up…

1.
OSPF has R1 router ID 172.18.1.1 . What happens when R1 configure with a new loopback interface IP address 172.17.1.1 ?
a. OSPF chooses 172.17.1.1 as new router ID when R1 is rebooted.
b. OSPF chooses 192.168.21.0 as new router ID when apply new configuration.
c. OSPF chooses 172.17.1.1 as new router ID when apply new configuration.
d. OSPF retains 172.18.1.1 as router ID until interface on which is configured goes down

The question is not clear. Maybe “refer to exhibit”??
“router ID 172.18.1.1” with the command router-id configured, a loopback interface or a physical interface??
If “router ID 172.18.1.1” is the ip address from a physical inteface, than is answer A correct.

@SogSAX can you please share the dumps at kometavr @ gmail. com

Please my test is 12/08 !!!

2.
Which feature eliminates the need for Cisco Express Forwarding to maintain a route cache ?
a. Adjacency table
b. RIB
c. FIB
d. MAC address table
Answer C
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipswitch_cef/configuration/xe-3se/5700/isw-cef-xe-3se-5700-book/ipswitch_cisco_express_forwarding.pdf

Can anyone share link for latest latest dumps???
Thanks in advance.

Which correct three causes of unicast flooding ?
a. forwarding table overflow
b. changes in STP topology
c. excess space in the forwarding table
d. consistent STP topology
e. asymmetric routing
f. symmetric routing

Ans:abe

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6000-series-switches/23563-143.html

@Doka, did you find an answer for that OSPF question, I feel like it might be D?

https://networklessons.com/ospf/ospf-router-id/

@ Doka

answer to question #4 = A,B,E

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6000-series-switches/23563-143.html

Question #3=C

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book/evn-confg.html

Hello Everyone,
Sorry, I left town for a few days. I passed the Route exam last week. I used the questions that were part of the All in One .VCE and I also used the Bluestacks free .VCE player instead of having to pay for the other software.
There were about 15 new questions I haven’t seen before, but even with nailing all of the Sims and answering the questions I did know correctly, I still passed with 840 score.

Sim: EIGRP Redistribution, EIGRP Stub Sim, Virtual Link
DnD: A few from the All in One, and then 3 brand new that I haven’t seen.

Questions that I haven’t seen before, Copp MPP, and DnD about Copp and MPP

I also created the lab sims in the latest version of GNS3 so I don’t have to install an older version. If interested let me know.

@Big Papi, pls can i get the gns3 u recreated, thanks. give me your mail id

@Big Papi, can you please share the dumps at kometavr @ gmail. com

Please my test is 12/08 !!!