Share your ROUTE v2.0 Experience

Can anyone advise if Dumps v1.5 (Procyber) is still valid?

@endstep
you don’t need Dump in Tshoot. all you need to do is get a premium membership and you will have all the tickets to practice and pass the test.

Is Dumps 1.5 (Procyber/Its Me) still valid?

Hi Please can anyone provide me with the digitaltut lab dumps. I have searched but i can’t seem to find a link to it. Please help

Link for VCE simulator: https://drive.google.com/open?id=0B4BwhRrx99T4RVdLSTBKR0pmRTQ

Link for CCNP R&S latest dumps v1.5 (Procyber): https://drive.google.com/open?id=1oTeYLtadZ-RqMK0dDV5aYGLIgUlG9_-5

Just download the VCE player and VCE file then load it. Good luck on our CCNP journey!

I want to buy a dump in the EXAMCOLLECTION. Since there are only 189 cases of problems, I wonder why the number of Twitter files here is about 490. And I’ll share the dump site dump, so please save the CRACK 2.3.4 CRACK file.

Mail address
ocd01002 at naver.com

I want to buy a dump in the EXAMCOLLECTION.

There are only 189 cases of problems.
That is why I doubt it. At digitaltut.com the VCE file is more than 490 questions, but is it acceptable to pass with 189 questions?

And I’ll share the dump site dump, so please save the CRACK 2.3.4 CRACK file.

Mail address
Electronic 01002 at naver.com

I want to buy a dump in the EXAMCOLLECTION.

There are only 189 cases of problems.
That is why I doubt it. At digitaltut.com the VCE file is more than 490 questions, but is it acceptable to pass with 189 questions?

And I’ll share the dump site dump, so please save the CRACK 2.3.4 CRACK file.

Mail address
ocd01002 at naver.com

Hi all,
I pass my exam today with 921/1000.
Dump procyber1.5 is valid 100%
Lab same on the site: OSPF eva, EIGRP eva, PBR, Redistribute, OSPF Sim, EIGRP SIM
Note: EIGRP-OSPF Redistribuition R2-R3 was using fastethernet so I’ve used distance eigrp 90 105 command.
DnD: AAA/ FRAME RELAY / LOOSE-STRICT/ IPv6 TRAFFIC FILTER
Thanks @Khaled, @soso, @digitaltut

HI,

Can anyone please share the latest vce file and dumps for the route exam. Am planning to give the exam next week.

{email not allowed}

Narnia

HI,

Can anyone please share the latest vce file and dumps for the route exam. Am planning to give the exam next week.

narniam9121(@)gmail.com

Narnia

Thanks Anonymous; so all the questions were basically from the CyberPro 1.5? Can you confirm thanks again and good luck

@ CCNP Helper Thanks a lot for link

@helpme: If you study on procyber1.5, u have least >900 score. I believe that.
I study on procyber about 3 days, i remember all answer, kaka
Sorry my english not good.

hi all

please share the link to route dumps at below :

maphil9090(@)gmail.com

.

Hi Guys

I sat for exam today , unfortunately i didn’t pass , because i was stupid .

I will make clear here , the Dumps still valid and everything from there however the only issue ihad with exam was i couldn’t implement ” copy run start ” that were spent almost all my time on and made me worry .

Opened case with Cisco and inform me it isn’t important to write it and it will be still counted .

so don’t worry when you are not able to save config ….. Good Luck .

Hi People
i Want to tell you that i today i’m not Pass the exam, i don`t know why ???? although I got the questions same like in the dump but i don’t know why i got 760 from 1000, Have you an idea why ??
too i can not save the configration on the router ?? I tried the comand #copy running-config startup-config or write memory but it does not work, pleas mybe you can help me i will tray again next week,

Pleas i want to know this questions,,

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key rolleover to work correctly?

A. SMTP

B. SNMP

C. Passwords

D. Time

Answer: ???

In which scenario can asymmetric routing occur?
A. active/active firewall setup

B. single path in and out of the network.

C. active/standby firewall setup

D. redundant routers running VRRP

Answer: ??

How does an EVN provide end-to-end virtualization

a. It tags traffic with an 802.1q at the edge interface

b. it tags traffic with an 802.1q at the trunk interface

c. it tags traffic with a virtual network tag at the edge interface

d. it tags traffic with a virtual network tag at the trunk interface

Answer :???

Pleas Answer me,

thank you in advance

@Sofinom

I believe the answers are the following:
Q1 -> D. Time
Q2 ->D. Redundant routers running VRRP
Q3 ->D. It tags traffic with the virtual network tag at the trunk interface

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key rolleover to work correctly?

D. Time

Answer: D. Time

In which scenario can asymmetric routing occur?

A. active/active firewall setup

Answer: A. active/active firewall setup

How does an EVN provide end-to-end virtualization ?

A. It tags traffic with an 802.1q at the edge interface

Answer: A. It tags traffic with an 802.1q at the edge interface

I will recant the active/active FW and agree on the VRRP

In which scenario can asymmetric routing occur?

D. Redundant routers running VRRP

Answer: D. Redundant routers running VRRP

On the EVN I hold fast to (A. It tags traffic with an 802.1q at the edge interface)

The VNET tag is a global value and thus VNs on each EVN device should be provisioned with the same tag value. The valid tag value range is from 2 to 4094. EVN is supported on any interface that supports 802.1q encapsulation, for example, an Ethernet interface. Instead of adding a new field to carry the VNET tag in a packet, the VLAN ID field in 802.1q is repurposed to carry a VNET tag. The VNET tag uses the same position in the packet as a VLAN ID. On a trunk interface, the packet gets re-encapsulated with a VNET tag. Untagged packets carrying the VLAN ID are not EVN packets and could be transported over the same trunk interfaces.

But the traffic is tagged on the trunk interface not the edge one.
As specified by Cisco, the traffic over the edge interface is untagged.

https://www.cisco.com/en/US/docs/ios-xml/ios/evn/configuration/15-1sg/evn-overview.html

An edge interface connects a user device to the EVN and in effect defines the boundary of the EVN. Edge interfaces connect end devices such as hosts and servers that are not VRF-aware. Traffic carried over the edge interface is untagged. The edge interface classifies which EVN the received traffic belongs to. Each edge interface is configured to belong to only one EVN.

An EVN trunk interface connects VRF-aware routers together and provides the core with a means to transport traffic for multiple EVNs. Trunk interfaces carry tagged traffic. The tag is used to de-multiplex the packet into the corresponding EVN. A trunk interface has one subinterface for each EVN. An interface is defined as an EVN trunk interface by the vnet trunk command.

Hi, I passed today with 895. No new questions. In the lab
Of Pbr the copy run start command is not implemented.
In the redistribution lab copy run start command is working.
In the ospf stub lab copy run start command is not implemented.
Be carefull to ospf area e process id numbers.
Exam focuses on frame relay, ipv6, vpn technologies, aaa, loose/,strivt e ip sla.
Simlet eigrp e ospf. Sofino your questions were present in my exam. I answered q1: D, q2:A, q3: D

@NICK – Could U be more specific that what you think went wrong?

@Sofino – Maybe you messed something up in labs? Some different number mismatch or something? Sometimes, as far as I understand, you have to use “show” commands so that it counts as part of the troubleshoot / verification. Not sure but maybe that’s the thing you missed.

You are talking the VNET tagging and 802.1q tagging. 802.1 is on The edge and VNET tagging is on the trunk interface.

These forum is infested with blood sucking marketers that are selling dumps that can be acquired for free. Anybody who provides a link to a purchase is a scam. Only go through links that has a dropbox to the materials. Pathetic how these people cannot make honest money by themselves. Trash people these days

@Anonymous: yes, but then there are two possible options, as Traffic is tagged with 802.1q on the edge and it is also tagged with vnet on the trunk… maybe I’m not understading the question really well.. it’s a bit confusing.

tao pay pay, send me Sameer Hassan Linked In. He’ll recieve an unwanting surprise if he continues this.

@Marr22 I agree, I am not sure I am really understanding what the question is asking either. Unless it’s a (Choose Two) question.

@Marr22 Alas with all that being said, without 802.1q on the edge none of it, to include the VNET trunk is going to work.

@Anonymous
wich area or wich ospf id did you use today ?

How does an EVN provide end-to-end virtualization ?

Answer: C – it tags traffic with a virtual network tag at the edge interface

Refer below:

Traffic Separation in EVN

Path isolation can be achieved by using a unique tag for each VN. This tag is called the VNET tag. Each VN carries over a virtual network the same tag value that was assigned by a network administrator. An EVN device in the virtual path uses the tags to provide traffic separation among different VNs. This removes the dependency on physical/logical interfaces to provide traffic separation. As illustrated in Figure 2, only a single trunk interface is required to connect a pair of EVN devices. A trunk interface provides connectivity between a pair of EVN devices and transports multiple VN traffic, whereas edge interfaces connect to specific VN users. An edge interface is mapped to a specific VN and is the point in the network where the VNET tag is applied to incoming traffic from VN users. Traffic traversing from an EVN device to VN users is untagged. Midpoint EVN devices do not remove, add, or swap tags.

The VNET tag is a global value and thus VNs on each EVN device should be provisioned with the same tag value. The valid tag value range is from 2 to 4094. EVN is supported on any interface that supports 802.1q encapsulation, for example, an Ethernet interface. Instead of adding a new field to carry the VNET tag in a packet, the VLAN ID field in 802.1q is repurposed to carry a VNET tag. The VNET tag uses the same position in the packet as a VLAN ID. On a trunk interface, the packet gets re-encapsulated with a VNET tag. Untagged packets carrying the VLAN ID are not EVN packets and could be transported over the same trunk interfaces.

https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/layer-3-vpns-l3vpn/whitepaper_c11-638769.html

@Anonymous

Could you provide an explanation to why you recanted your original answer foe active/active FW and agree on the VRRP?

Because I agree with the Active/Active Answer

Designs Options for Support of Asymmetric Routing in Firewalls

1. Symmetric routing flow through the firewall

Keep the traffic flow symmetric through the firewall infrastructure. Here, the packet flow from one security domain to another will be through a single firewall. Redundancy for the flow is achieved via firewall redundancy (failover configuration).

2. Support of the Asymmetric routing feature

The Asymmetric routing (ASR) feature is supported in both the FWSM 3.x and ASA 7.x code releases, and can be leveraged in the firewalls in active/standby and active/active modes. This feature aligns the firewalls with the Layer-3 network to avoid asymmetric routing issues.

Passed today with 9xx, all the questions from pro cyber1.5. Thanks to all who have contributed to it.

No new questions seen.

Thanks to digitaltut.

@Scammers be gone! I recanted due to the fact that most Active/Active FW scenarios have session infinity. Plus after reviewing the question more “In which scenario can asymmetric routing occur?” It can occur when my VIP for VRRP is active on one interface but the return traffic arrives on the other interface.

Hi guys please i need a verification of the question below:

A network Engineer enables OSPF on a frame relay WAN connection to various remote sites, but no OSPF adjacencies come up. Which two are possible solutions for this issue (Choose two)

A. Change the network type to point-to-multipoint under WAN interface
B. Enable virtual links
C. Change the network type to nonbroadcast multipoint Access
D. Configure the neighbour command under OSPF process for each remote site
E. Ensure the OSPF process number matches among all remote sites

It’s me v1.5 procyber says the answer is A and D but i am not so sure of D. Please help somebody. whats the correct answer

just cleaned the exam with latest 455Q dumps

it is the 455Q dumps link:
http://www.fpje.com/ccie.html

@Scammers be gone!

this is the link that Sameer Hassan is using:

https://drive.google.com/open?id=1CR1HoQKeP-NyZLuP3dsYP7rV-RNfx2pj

he blocked me, it was a link where you go directly to a whatsup group where there are around 25 people.

he asked for 16$ and promised to give me the lasted dumb and the labs on GNS3 up and running.

at the end he gave me a dump where the D&D were incomplete and he was not able to install GNS, he said he did his job on me, and he did not give me my money back.

keep in mind he is changing his name many times, he is using USA names lately.

Regards,

He posts this link every day with a different name and saying he passed with 9xx.

he is destroying this community in my opinion, but it was my bad to open this link.

is there a ccna security site like this?

Please tell me the correct answer for this question with some explanation. (At least the answer pls)

How to set up IP SLA to monitor Bandwidth between the certain limits?
A. Timer
B. Frequency
C. Threshold
D. Queue-limit

Thanks

Passed today the route exam. The 484 questions are still ok. Maybe one or two new questions. The labs and sims are from this site.

Someone asked if the price was ok. I payed almost 300 euro for the exam.

Scored 9xx, used dumps from IT-Libraries. You can find them on the net for free or in the comments here.

Dose anyone have the full version for this dumps? https://drive.google.com/open?id=0B5mAFqgydmCzQUh0SUxOdE03VGc

Does anyone know where can I find/download CBT nuggets videos for CCNP for free ? Please send me link to costler222gmail.com

Hello everyone, curious about this one here…

How does an EVN provide end-to-end virtualization
a. It tags traffic with an 802.1q at the edge interface
b. it tags traffic with an 802.1q at the trunk interface
c. it tags traffic with a virtual network tag at the edge interface
d. it tags traffic with a virtual network tag at the trunk interface
Answer : ???

Proposed answer was A BUT according to this edge interfaces dont tag traffic. Please provide reference for justification

An edge interface connects a user device to the EVN and in effect defines the boundary of the EVN. Edge interfaces connect end devices such as hosts and servers that are not VRF-aware. Traffic carried over the edge interface is untagged. The edge interface classifies which EVN the received traffic belongs to. Each edge interface is configured to belong to only one EVN.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book/evn-overview.html

Link for above explanation

Passed today! No new questions, everything was from this site and “it’s me v1.5” VCE. Good luck to everyone!