Share your ROUTE v2.0 Experience

@ Mild_Fart
Yes.

@kir what is the dhcp dnd?

@timm & @Someone17
PMTUD & TCP MSS are NOT alternatives.
PMTUD deals with (IP packets) & works in L3, while TCP MSS deals with (TCP segments) & works in L4. Since the question is about fragmentation in (segments), the answer is going to be (D. TCP MSS).

Hi guys,

For EIGRP STUB SIM question;

Question 4
What is the advertised distance for the 192.168.46.0. network on R1?
A. 333056
B. 1938688
C. 1810944
D. 307456

dump saids “C” but not “A”
Please answer

Hi guys,

For EIGRP STUB SIM question;

Question 4
What is the advertised distance for the 192.168.46.0. network on R1?
A. 333056
B. 1938688
C. 1810944
D. 307456

dump saids “C” but I think “A”.
what do you think? please answer~

made vce file out of all pdf’s provided by Someone17
Please say thanks to him and Kikavich for all the hard work they have put in to compile that dump

www. dropbo x.com/s/oqd7 dept3tdg1vy/all%20in%20one.vce?dl=0

Just for Note Kikavich and Me are the same man :D just this is other my nickman

So To All I did this for all people and my couleges FOR FREE, because here is war with questions
Just I want to Thanks To JESSUS that give me the heart to do that.

GOD BLESS ALL OF YOU :)

@Chris
That will depend on the output of sh ip eigrp topology
In Eigrp Evaluation Sim on digitaltut it is indeed 333056 which is answer A

Thank you Someone17 :D much appreciated!

Good man Someone17, may Mild farts never float in your general direction

I need to vce file for 477Q Please

@p3dr0
THANKS MAN :)
Q20 about NTP is maybe wrong
“+” and all 377 -> schould be answer B: master is not synchronyzed but exchanging NTP packets successfully.

“*” overlook :)
The Q is correct

Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working , what is the reason of this problem? (Choose Two)
A. area Id match
B. authentication mismatch
C. process id of ospf not match
D. ospf timers not match
E. MTU mismatch
Correct Answer: DE

100% sure about that???
“1- EIGRP: MTU mismatch has nothing to do with EIGRP neighborship and these routers will become neighbor normally and transfer routes as well.

2- OSPF: MTU mismatch won’t prevent two OSPF router to become neighbor, however they couldn’t transfer routes (LSAs) successfully and finally the neighborship will be dropped, the neighbor state in this condition would change from Down up to ExStart and after couple of trying to send LSUs the state will fall to its steady state: Down.”
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13684-12.html#neighbors

There ia a similar question:

Using new backup router in spite of faulty one in ospf domain but relationship with neighbor in one interface only not working , what is the reason of this problem? (Choose 2)
A. area Id mismatch
B. authentication mismatch
C. process id of ospf not match
D. OSPF timers not match
Answers A,D

@Kikavich / @Someone17, thanks for the vce man, really appreciate :) Is it possible you could share a link to download the actual vce program aswell?. If not, dont stress and thanks for the links to the other goodies :)

I passed in the last few days 8xx
Kikavich v4 june.vce is sufficient for mcq
same drag and drops everyone had plus a dhcp one that threw me
eigrp stub,eigrp eval & PBR

Sage advice: Study SOME SORT of material along side using this site, these test are tricky and I cannot fault ppl for using it to get past wonky questions. HOWEVER if you do not have any practical knowledge on this material when you go for an interview you will be fawked. Good luck ppl

Hi All,
Plz, give your hands to me.

Which type of Netflow information is displayed when the show ip flow export command is executed?
A. top talkers
B. local status and statistics
C. sent status and statistics
D. export interface configurations
Correct Ans: C or D

just passed the route exam today. dumps still valid with few new questions and 1 new dnd.

@renew
DnD about what?
Can you recognize new question?

these are the choices but the options are different from what the options in jazzy DND

ip dhcp relay information option
ip dhcp relay information check
ip dhcp relay information policy
ip dhcp relay information subscriber-id
ip dhcp relay information

the one that crypto posted above came up to my exam as well, netflow information.

@renew
other than this?

ip dhcp relay information option –> add suboption and the remote ID suboption
ip dhcp relay information check –> Verify relay information option (in forwarded BOOTREPLY)
ip dhcp relay information policy –> Define reforwarding rules (for a DHCP relay agent)
ip dhcp relay information subscriber-id –> enable a service provider to add a unique ID
ip dhcp relay information –> configured in global configuration mode applies to all interface

@crypto
C is the answer
https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/oaggnf.html

Router# show ip flow export

Or

Router> attach slot-number
LC-Slot> show ip flow export

Displays statistics about the NetFlow data that has been exported. Enter the command in User EXEC mode to display NetFlow data from one line card, or in Privileged EXEC mode to display NetFlow data collected from all line cards.

@p3dr0
thanks, bro
To display the status and the statistics for NetFlow accounting data export, including the main cache and all other enabled caches, use the show ip flow export command in user EXEC or privileged EXEC mode.

So, right >> status and statistics
but, with LOCAL or SENT word?

guys i need all in one vce form

pls share me link ty all

Hello all! Can someone hug me because i’m stressed about taking exam?

I have good advice for all people who don’t know the right answer on exam, just pray for allah and You’ll pass! It’s 100% legit solution!

@greg yes, other than that. that is not the options in the exam

@crypto
My guess is SENT as command states export

@p3dr0

thank bro.

Just passed – 911
All you need DnD from Kikavich – ALL DRAG_DROP.pdf – good one
and Prince 91q – is good.
EIGRP stub, and OSPF Eval.
Good luck!

@Timmmmm cong.

@cedric91 thanks!
____________________
Forgot EIGRP stub SIM, and OSPF Eval AND EIGRP EVAL

Congratulations!
Can you please share Kikavich pdf file.?

What is the advertised distance for the 192.168.46.0 network on R1?
A. 333056
B. 1938688
C. 1810944
D. 307456

what will be right answer above on EIGRP Evaluation sim please ? (1810944 OR 333056)

Hi Guys, Just let you know I passed with 912. sorry i was celebrate yesterday to update you.
Many thanks for Digitaltut.com and 477Q also 91Q with big thank for Kikavich ( last 2 days before the exam I got it) study the book more than 4 month last 10 days 10 hr study
Fox on Drag and Drop it is same as resources that I mentioned but ( make sure the change terms
on Question and answers the delete some words on DnD) even on the Questions they change answres to be hard to find it, so don’t fox one words in the question , you have to make sure to understand the Qs well then understand the answer as well.
most of Question on Kickavich special last 100 Q in the PDF.
Oh I found another Questions on Digitaltut ( Member user) many of you maybe didn’t see it before because it is not showing with list which is on right but it is on the server or somewhere on there old folder for 3 or 4 years ago but it will help you to open your knowledge, there is like around 200 Q or less for ( EIGRP, OSPF, Redistribution and IP SLA) here the way how to find it is very simple ( Just type the subject for example “OSPF” on search the hist search it will show
you each “OSPF” as ( OSPF Questions 1 until Ospf Question 9 or 10).

Good Luck for everyone my account still active I will keep update if you need any help as I can

Hi, I have important question about the procedures, can I masturbate during the exam?

please share latest update dumps CCNP ROUTE

Just passed 300-101 today. with 790. 91q is good, but don’t rely on it too much. should study 503 or 400+q. had Eigrp sim, then Pbr and Eigrp stub lab. Don’t forget to study all the lab, you just never know what you are gonna get. one lab may be able to help you to save your $300.

looking for someone with CCNA in helsinki finland for an urgent role.. kelvin @ skysys dot co dot ke

reach out to me asap

Hi Guys, Just let you know I passed with 912. sorry i was celebrate yesterday to update you.
Many thanks for Digitaltut.com and 477Q also 91Q with big thank for Kikavich ( last 2 days before the exam I got it) study the book more than 4 month last 10 days 10 hr study
Fox on Drag and Drop it is same as resources that I mentioned but ( make sure the change terms
on Question and answers the delete some words on DnD) even on the Questions they change answres to be hard to find it, so don’t fox one words in the question , you have to make sure to understand the Qs well then understand the answer as well.
most of Question on Kickavich special last 100 Q in the PDF.
Oh I found another Questions on Digitaltut ( Member user) many of you maybe didn’t see it before because it is not showing with list which is on right but it is on the server or somewhere on there old folder for 3 or 4 years ago but it will help you to open your knowledge, there is like around 200 Q or less for ( EIGRP, OSPF, Redistribution and IP SLA) here the way how to find it is very simple ( Just type the subject for example “OSPF” on search the hist search it will show
you each “OSPF” as ( OSPF Questions 1 until Ospf Question 9 or 10).

Good Luck for everyone my account still active I will keep update if you need any help as I can

What are two limitations when in use of NPTv6 for lPV6 vs lPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaces NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations
Answer: CE
Is the answer correct as on another dump for the limitations a got CF

@mike
I think about this question on this way – they are asking about limitation… so… lack of overloading is limitation, mismatched prefix allocation is a limitation but 1-to-1 prefix rewrite is just a feature…
I hate cisco for this kind of questions.

Hi,
Kindly anyone can share the Kikavich pdf file.
I have been requesting here for the last 3 days but i don’t know why anyone not share the link of Kikavich pdf file.

Please kindly share it.!

Thanks to all!
i got the ikavich pdf file.:)

Hi guys, could you share please dumps? Planning to exam next week. Kindly send to my email
ccnp(dot)fpi@gmail(dot)com. Appreciate your help. Thank you and Good Luck! God Bless!

@ Can Route, could you also share also to me the ikavich pdf file? ccnp(dot)fpi@gmail(dot)com
thank you so much! God Bless!

@Mustafa, congrats! Could you share please 477Q and 91Q you use for a reference? I’m planning to take exam next week and it would be a great help. Thank you and God Bless! here’s my link
ccnp(dot)fpi@gmail(dot)com

@ccnp fpi, I send you already the files

Good Luck