Share your ROUTE v2.0 Experience

@cisconinja
The OPTIONAL feature “asr-group” is a SOLUTION !!

Passed today!
53q, about 4-6 dnd, 3 labs (Eigrp stub, Eirpg eval, Ospf eval)
New questions about 6-8: frame relay config, frame relay, acl, random routing stuff
Studied 477+91, 91 Prince most helpful
*Thanks to all who contribute here, it really really helped, you all are the best!*

Refer to exhibit. Which two reasons for IP SLA tracking failure are likely true? (Choose two)
R1(config)#ip sla 1
R1(config-ip-sla)#icmp-echo 172.20.20.2 source-interface FastEthernet0/0
R1(config-ip-sla-echo)#timeout 5000
R1(config-ip-sla-echo)#frequency 10
R1(config-ip-sla-echo)#threshold 500
R1(config)#ip sla schedule 1 start-time now life forever
R1(config)#track 10 ip sla 1 reachability
R1(config)#ip route 0.0.0.0 0.0.0.0 172.20.20.2 track 10
R1(config)#no ip route 0.0.0.0 0.0.0.0 172.20.20.2
R1(config)#ip route 0.0.0.0 0.0.0.0 172.30.30.2 5

A. The source-interface is configured incorrectly
B. The destination must be 172.30.30.2 for icmp-echo
C. A route back to the R1 LAN network is missing in R2
D. The default route has wrong next hop IP address
E. The threshold value is wrong

Answer: C E

Also, what’s wrong with the 500 threshold value?
The correct answers are A,C

@doka

correct! no error with the threshold value. You’re right A C

I still think the VRRP is the answer tho on the Asymmetric routing question

@thankful
do u remember new questions? Will share them here please? Thanks

Would 477 dump
And 557 dump

Be enough to pass or do i need something else ?

What is the NHRP role in DMVPN? (Choose two)

A. Obtains the next-hop to be used for routing
B. Routes the packet through the tunnel
C. Identifies the PIM-SM RP used to route the packet
D. Can authenticate VPN endpoints
E. It requires each tunnel endpoint to have an unique network ID

your response will be highly appreciated.

Does anyone remember that new DND frame relay q?

AUTHENTICATION:
– Supports a local database for device access
– Supports Encryption

AUTHORIZATION:
– Enforces time periods during which a User can access the device
– Specifies a User’s access priviliges

ACCOUNTING:
– Verifies network usage
– Not supported with local AAA
.
.
Can anyone please confirm this is correct

@Routeontheway
Answer is A and D

i passed the exam today 8XX.
totally 53Q

3 labs ; EIGPR and PBR sim and Eigrp Stub. note:wr not work in my exam ever sim
4 dnd , frame relay ( a new one ) , ACL , AAA , DHCPv6
I confuse about(vrf & uRPF) so be careful.
new question about syslog(port+firewall+udp/tcp)
new question about bgp, redistribute.
Good Luck to everyone
jazz & 477q is helpful
thx all.

——————————————————————————
To All

https:// drive. google.com/file/d/12NThff_10v5feHru7MPjfr1uJSegiWF4/view?usp=sharing

This is my updated Jazzy version including all new questions which is already mention about

Hello

To All

——————————————————————————
To All

https:// drive. google. com/ file/d/12NThff_10v5feHru7MPjfr1uJSegiWF4/view?usp=sharing

Please remove the space into link

This is my updated Jazzy version including all new questions which is already mention about

I just want to help to other people

This is the best that I collected from anywhere

GOD BLESS YOU

@ digitaltut You can review this file and add all New Question which is missing from this blessed site

—————————————————————————————————-
To All

I would like to share and 477 Corrected plus all new questions not included in 477 plus D&D New

https:// drive. google. com/ file/d/1r_VYwkje2QN0UR3Rr6HN7zbi8OTLEsaK/view?usp=sharing

Please remove the space into link

——————————————————————————————————

—————————————————————————————————-
To All

I would like to share and 477 Corrected plus all new questions not included in 477 plus D&D New

https:// drive. google. com/ file/d/1r_VYwkje2QN0UR3Rr6HN7zbi8OTLEsaK/view?usp=sharing

Please remove the space into link

——————————————————————————————————

Hi Guys, ignore a guy name Cooper, he is a fraud. He will try sell dumps to you but is fraudulent.
God Bless you all!

@Someone17
Many thanks, but the D&Ds questions are not displayed correctly. Please correct it!

could somebody share 91q and 477. I have my exam in 10 days from now.

@someone

question 84, Answer is D
it checks the ACL first then the source IP address

@someone I meant Q184

@cisconinja the answer is correct no where in description on this question is not mention that ACL is configured so this is the correct answer

@b.land
which is new frame relay dnd? Will u please share it here . Thx

@someone
Question 202. LSA type 8

I think the correct answer is link-local

https://www.cisco.com/c/en/us/support/docs/ip/ip-version-6-ipv6/212828-link-lsa-lsa-type-8-and-intra-area-pr.html

@someone
Question 203. I think the answer is serve

The serve keyword enables the device to receive time requests and NTP control queries from the servers specified in the access list but not to synchronize itself to the specified servers.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_3ntp.html

what are the valid dumps and questions for exam. plz share link. i joined a group previously but dont know what to do next. plz guide. i have to attempt exam in 2 days and panic now.

Didn’t pass today! While I’ve seen some questions from the 91q, there were LOTS of new questions that I haven’t seen anywhere. I guess June exam is out, at this point all current dumps are no longer valid, only use them for review till new dumbs are out.

Don’t waste your money on paid dumbs either, they’re pretty much the same

@someone
question 389. the correct answer is B

If you want to configure both instances of the command to use the same destination IP address, you must use unique udp-port numbers. You receive a warning message when you configure the two instances of the command with the same IP address. The warning message is %Warning: Second destination address is the same as previous address .

https://www.cisco.com/en/US/docs/ios/12_3t/netflow/command/reference/nfl_a1gt_ps5207_TSD_Products_Command_Reference_Chapter.html

@Tomas Harris
Many thanks

@cisconinja, thank you. I only study prince 91 and jazzy v3 and DND. I only found out 3 new question including frame relay. the frame relay drag and drop is the step how to configure frame relay.

@cisconinja

question 389 I know this explination but if we configure 2 same ip address with different udp ports then we get ERROR MESSAGE so this is not correct answer for me the other acceptable answer is to use VRF

Note Do not enter the same ip address twice. However, entering two different ip addresses with the same udp port number is configurable.

https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/12s_mdnf.html

VRF Destinations for Exporting NetFlow Data
Before Cisco IOS Releases 12.4(4)T and 12.2(18)SXH, only one routing option existed for NetFlow export data packets. NetFlow sent all export data packets to the global routing table for routing to the export destinations you specified.
Cisco IOS 12.4(4)T, 12.2(18)SXH, and later releases provide an additional routing option for NetFlow export data packets. You can send NetFlow data export packets to a Virtual Private Network (VPN) routing/forwarding instance (VRF) for routing to the destinations that you specify.
To send NetFlow data export packets to a VRF for routing to a destination, you enter the optional vrf vrf-name keyword and argument with the ip flow-export destination ip-address port command. To configure the global routing table option, enter this command without the optional vrf vrf-name keyword and argument.

@someone17

Just fyi, I tried it on the gear (its a warning not an error), below is a part of the running config

!
ip forward-protocol nd
!
ip flow-export destination 10.10.10.10 111
ip flow-export destination 10.10.10.10 222
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 10.10.10.2 track 10

@Lebron James

Congrats man!! Thanks for the update

Yes Warning However for me VFR is Correct Answer because this option is acceptable and when configuring two same ip address with different udp port is not configurable acceptable for cisco, so this is a correct anser for me. If You want in real exam go for udp port Your choose.

@Lebron James
You passed exam on 2nd of June. And ExamChanged attempted exam today. So doesn’t his update more latest than you?

@Ghauri

unfortunately yes, but we better wait for more people to verify the exam has changed.

@eng

AUTHENTICATION:
– Supports a local database for device access
– Supports Encryption

AUTHORIZATION:
– Enforces time periods during which a User can access the device
– Specifies a User’s access priviliges

ACCOUNTING:
– Verifies network usage
– Not supported with local AAA
is correct

Just from the exam and I have passed. The exam has not changed yet. Most of the questions are in 91q and All in one by Kakavich the new section area
Thanks guys

@Ghauri
Which country did you take your exam in?

Congratulations!!!

Just came back from the exam center in India.

Luckily passed the 300-101 exam with a good score of 9XX!!!

There were few new questions that guys have reviewed here.

And, questions are mainly from the latest Pass Leader 300-101 dumps (!!!New Version Please!!!), PL is stable and valid enough for passing now.

Next for my 300-115 and 300-135 exams, good luck, all!!!

@RockerFeller

what you mean by new section area pls ?

@Someone17 your link is not working. error 404

@networking

it is working, put more effort in ch34ting.

anyone please send my dumps at ss1stjan @ gmail. com ..thanks in advance

passed today good score
some new questions but dumps still valid prince 91 q important u should know difference bet passive interface and distribute list
1 new question about distribute list wi same topology of passive interface
asking about (config-if , config ,in , out )
labs pbr , eigrp stub ,eigrp sim
at last take care choices are not regular
hop success to all of u

@ eng
congratulations , but did not you do d & d? but you are sure?
can you give me explanation please? thanks

@1w4n
haven’t taken yet.