Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
Where do I find CCNP Route v7 Lab Manual ?
Hi! does anyone have the latest VCE player installer.. VCE linked here needs a higher version.. Thank you very much.!
hi guys, im gonna enter the exam today .
wish me luck. i’ll write after the exam.
i studied 477 q before but in there everybody said dont.
i studied digitaltut new 94q and 91q ( both of them same ) and jazzy dnd. i wish i’ll pass.
Hello Team
Thanks to god, passed yesterday.
All questions were from the dumps
You can contact me via email : cooper saphir @ gmail . com to get the dumps
Good luck
A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF adjacencies come up Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface
B. Enable virtual links
C. Change the network type to nonbroadcast multipoint access
D. Configure the neighbor command under OSPF process for each remote site
E. Ensure that the OSPF process number matches among all remote sites
Please which one is correct A and C or A and E ?
took exam today, very accurate, 95% of questions from jazzy V3 91q/dnd/sim. some new questions but very easy. 9xx score.
Question 7
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
I think the answer is A&C
Digital say A&D…
which labs are there for the exams and which DND were asked pls reply if you remember them exam today..
I’m going to take the exam tomorrow, if ever this come out the exam.
how old is the type 4 lsa from router 3 for area 1 on router R5 based on the output you have examined. Can you please let me know what step should I take?
@stub
This was shared by another member yesterday:
1 Lab – EIGRP STUB
2 Sim- Eigrp Evaluation and Ospf evaluation
5 Drag and Drops- Adverse conditions, Ip DHCP Relay, ACL, Frame relay LMI and AAA authorisation command
Good luck and please update us!
@cisconinja thanx for your reply.
This was supposed to be the expiration day of my ccna. So i took the exam today. I have no other choice or else my ccna will expire. Passed the exam with 9xx score. I used all the materials here on digitaltut, reviewed every topic, researched every comments. Sometimes you just need some keywords. But still during my review. I’ve learned a lot of things on networking. Good luck to all! See you in tshoot!
What I mean is should I use no ip domain-lookup?
Can anyone tell me where to find the jazzy v3 link?
Thank you in advance.
@ppp
yes, I need jazzy v3 too. please, can anybody share?
Regards
@ppp
Tata has published the files few pages ago.
https:/ /drive.google.c om/drive/f olders/1zPsB1wW8Qt A8ThFgI_qKBhSXr8reOJKx
remove the spaces and say thanks to Tata
other user wiht nickname GOD, is working in jazzy v4, which will include 15 new questions.
@boyi
I think God has abandoned us! I got 3 days to go and no update
@cisconinja
lets pray to GOD!!!!!!!!!!!! hahahahaha
come on GOD, we need you!!!!! please, we beg you, share jazzy v4!!!
this link it’s not work
https:/ /drive.google.c om/drive/f olders/1zPsB1wW8Qt A8ThFgI_qKBhSXr8reOJKx
please share link work
@fleshgod remove the space on folders and QtA8 part
@boyi Thank you so much sir.
By the way I got Prince q91 v1 for a while ago, Is it still valid?
@student
Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result WHEN the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
I agree with you Ans. A,C (WHEN the relay agent is rebooted, not IF!!!!)
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/xe-3s/ipv6-xe-36s-book/ip6-dhcp.pdf
you dont need God V4, 91q is enough to pass as I read in the previous page. I am going to take exam tomorrow. I only study 91 q by prince and Jazzy dnd.
@ Lebron James
good luck ! and give us a feedback about the exam please :)
@Lebron James, ok, good luck.
please share your results tomorrow
Hi all, can someone take my hand and hug me cause im little scared about the exam?
hi guys , i passed the exam today 89X.
totally 53Q
Most of the questions 91q and also digitaltut questions . i studied 477q and 91 q . in exam there were 5 q i have never seen before.
3 labs ; EIGPR and OSPF sim and Eigrp Stub.
4 dnd; framerelay ( a new one ) , ACL , AAA , Framerelay
Good Luck to everyone
Hi,
I’ve passed my CCNP exam recently and struggling with creating a resume. Does anyone know where can i download a sample resume from ?
I appreciate your feedback.
@Khan – try googling for them, there’s plenty. That’s what I did.
PASSED TODAY :)
Contact me to get dumps (latest version)
drive.google.com/open?id=1n-zu63sfWOGmDPw45J-pxT0iwmsvip55RCinXDSHZzg
Bye
@mmtco
Did you use digitaltut premium? Or did you mean questions in the forum?
Hi Team,
I passed the exam today with a good marks (all questions were from the dumps)
You get in touch with me (via whatsaaap) to get the dumps
00212682627240
@mmtco..can u plz share the digitaltut questions plz…?
@mmtco
which frame relay new dnd did you have? Your comment will be appreciated.
Hi, whole lessons of CCNP route :
https://ipcisco.com/ccnp-route/
enjoy…
Passed today with 8xx, lab only eigrp stub, new frame relay question and 2 or 3 new question. I don’t know why its only 8xx when there is only 3 new question including frame relay drag and drop.
Hi suppotive friends.
I am new in CCNP – Route.
Can any body send me latest dumps for CCNP Route-300-101 exam on
tariqbodla at hotmail dot com
congrats @Lebron James, thanks for the heads up
@lebron
do u remember any of new question
would u plz clarify frame relay D&D
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
what is the answer
Just made jazzy v3 vce. Enjoy and good luck with the exam
https:// http://www.dropbox.com/s/q57jxy 36t3iyv6v/Jazzy-p3dr0%20v3.vce?dl=0
where can i find prince 91q that everybosy is mentioning?
@STUDENT
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
The correct answer is A 100% sure
Explanion:
It’s asks about “In which scenario can asymmetric routing OCCUR?”
Asymmetric routing is in most cases a PROBLEM. Other words in which scenario can this problem occur?
For insant:
https://supportforums.cisco.com/t5/security-documents/asa-asymmetric-routing-troubleshooting-and-mitigation/ta-p/3117045
“When a packet leaves the client destined for http://www.cisco.com, it arrives at its default gateway of the inside interface of ContextA. ContextA then forwards it on toward the Internet where it reaches the server. Then, the server sends its reply back toward the client. When the response arrives at the Router, it is routed to the outside interface of ContextB, rather than ContextA where the original request came from. Because ContextB never saw the initial request and does not have an existing entry its connection table, the packet is dropped and thus the client is not able to establish a connection with the server. Packet captures on the firewall contexts will clearly illustrate the asymmetry, while the client will simply see no response from the server.”
The solutions mention here:
http://www.ciscopress.com/articles/article.asp?p=174313&seqNum=5
“Consider L2 Redundancy as a Workaround
With the careful introduction of L2 redundancy as opposed to L3, technologies such as Virtual Router Redundancy Protocol (VRRP) or Hot Standby Router Protocol (HSRP) can allow traffic to flow through a single location while still providing redundancy. This option works best on high-speed connections where the use of only one path instead of two or more does not affect network performance.”
Also D. redundant routers running VRRP would be a solution <– NOT correct
PS Sorry for my bad english:)
I can see the answer only. can anybody please share the link or pdf document of the ccnp route questions?
@STUDENT
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
The correct answer is A 100% sure
Explanion:
It’s asks about “In which scenario can asymmetric routing OCCUR?”
Asymmetric routing is in most cases a PROBLEM. Other words in which scenario can this problem occur?
For insant:
*https*:*//*supportforums*.*cisco*.*com*/t5/security-documents/asa-asymmetric-routing-troubleshooting-and-mitigation/ta-p/3117045
“When a packet leaves the client destined for http://www.cisco.com, it arrives at its default gateway of the inside interface of ContextA. ContextA then forwards it on toward the Internet where it reaches the server. Then, the server sends its reply back toward the client. When the response arrives at the Router, it is routed to the outside interface of ContextB, rather than ContextA where the original request came from. Because ContextB never saw the initial request and does not have an existing entry its connection table, the packet is dropped and thus the client is not able to establish a connection with the server. Packet captures on the firewall contexts will clearly illustrate the asymmetry, while the client will simply see no response from the server.”
The solutions mention here:
*http*:*//*www*.*ciscopress*.*com*/articles/article.asp?p=174313&seqNum=5
“Consider L2 Redundancy as a Workaround
With the careful introduction of L2 redundancy as opposed to L3, technologies such as Virtual Router Redundancy Protocol (VRRP) or Hot Standby Router Protocol (HSRP) can allow traffic to flow through a single location while still providing redundancy. This option works best on high-speed connections where the use of only one path instead of two or more does not affect network performance.”
Also D. redundant routers running VRRP would be a solution <– NOT correct
PS Sorry for my bad english:)
@doka,
I think you’re wrong. HSRP and VRRP cause asymmetric routing and that’s why you need to set the ARP time less than the CAM table timer.
The Asymmetric routing (ASR) feature is supported in both the FWSM 3.x and ASA 7.x code releases, and can be leveraged in the firewalls in active/standby and active/active modes. This feature aligns the firewalls with the Layer-3 network to avoid asymmetric routing issues.
https://www.cisco.com/web/services/news/ts_newsletter/tech/chalktalk/archives/200903.html
@lebron
Congrats!! the score doesn’t matter, its a pass or fail exams.
3 new questions from Jazzy v3 91 questions or 422 questions?
Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key rollover to work correctly?
A. SMTP
B. SNMP
C. Passwords
D. Time
Please i need answer for this question. make me confused between ( Time and Password)?
Hi all,
I dont find the archive of user GOD with the news 15 questions.
In which page there is ???
Thanks.
@cisconinja
“The Asymmetric routing (ASR) feature is supported in both the FWSM 3.x and ASA 7.x code releases, and can be leveraged in the firewalls in active/standby and active/active modes. This feature aligns the firewalls with the Layer-3 network to avoid asymmetric routing issues.”
Yes, but the optional feature “asr-group” is a SOLUTION
Please read carefully this document:
http://www.ciscopress.com/articles/article.asp?p=174313&seqNum=5