Share your ROUTE v2.0 Experience

@Naz,is the PBR sim part of the exam also?
how many DNDs were in the exam?

Refer to the exhibit.

router eigrp 65535
no auto-summary
network 10.0.0.0 0.0.0.255
router ospf 1
network 192.168.5.0 0.0.0.255 area 0
passive-interface loopback0
redistribute eigrp 65535
If this configuration is applied to a device that redistributes EIGRP routes into OSPF. which two statements about the behavior of the device are true? (Choose two)

A. EIGRP routes appear in the routing table as E2 OSPF routes
B. The device router ID is set to Loopback0 automatically
C. The device redistributes all EIGRP networks into OSPF
D. EIGRP routes appears in the routing table as N2 OSPF routes
E. The device redistributes only classful EIGRP networks into OSPF
F. EIGRP routes appears as type 3 LSAs in the OSPF database

this Q above confused me , on digitaltut is C and E, but on Jazzy and 91 has another answer which is A and E
so which one is correct?

Which technology is required on an EVN trunk interface?
A. 802.1q
B. NAT
*C. VRF-Lite
D. IS-IS

C is correct answer ?

@ Routeontheway
this Q on digitaltut is giving wrong answer which is C, but it should be ” A” according Jazzy 477 also follow up this link below,

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/evn/configuration/xe-3s/evn-xe-3s-book/evn-overview.html

If an EVN trunk is configured on an interface, you cannot configure VRF-Lite on the same interface

In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP

In Digitaltut correct answer is D, but in Jazzy 477 and 91Q is A
So which one is correct?

@MMI-Route
i got around 5 DND in the Exam.

Answer to your question for PBR, YES it is part of exam
although it didnt came for me, but i was well prepared for all of them.

so make sure u Master all of the sims (+concept) on this site for the Exam

Good luck.

@ Mustafa i had the same questions in the exam, i chose A.
Asymmetric happens when there is ACTIVE ACTIVE firewall.

@Routeontheway
A:802.1q is the correct answer.
You need 802.1q to work on EVN Trunk.

VRf-lite Extends EVN.

Hi All so to confirm do we need to study only:

1) jazzy 91q or prince 91q?
2) digital tut premium?

No need to review the Jazzy v3? Its a lot of questions i heard that they might not even be right?

I only have 1 month to take the exam so need to make the best of my time here. Thanks all for the input

Hi All so to confirm do we need to study only:

1) jazzy 91q or prince 91q?
2) digital tut premium?

I only have 1 month to take the exam so need to make the best of my time here. Thanks all for the input

Passed! Thanks for everyone contributing on this site for their help!

Study Jazzy/Prince 91Q dumps. Really that is all you need so don’t over think it.

The DNDs and Sims were the same as on Jazzy. New DND was a frame relay configuration where they give you part of the frame relay config and you drag and drop the missing parts. They give you 6 items to choose but only 4 are correct and have to be in the correct order.

Also had some new questions as well.

One was:
How do you configure a ipv6 dhcp relay on a vlan interface?
Option 1. Enter global config mode, turn on ipv6 dhcp relay, add ipv6 relay host
OPtion 2. Enter global config mode, add ipv6 relay host
Option 3. Enter vlan interface config, add ipv6 relay host
Option 4. Enter vlan interface config, turn on ipv6 dhcp relay, add ipv6 relay host

Second one was already on this forum but not in Jazzy so study it:

Features of Netflow version 9? (Choose two)

A. IEEE standard
B. IETF standard
C. ingress
D. egress
E. ingress/egress
F. Cisco proprietary

Another new question was

1. ITKE(Config)# service timestamps log datetime msec

What does this command do?
A.
B.
C.
D.

Thnx 007 and Anonymous for replies!

What is jazzy and prince? Are these available here on digital tut?

Thanks @Naz btw Congrats ..!

any sites to share ccie written exam.. just going to renew my ccnp.

Hey guys,

I’m not seeing many BGP questions in the dumb. For people who took the exam, are there not many BGP questions?

Thanks

hello

scam UP^ don’t waste your time with any post asking you to email them for the dump

Question 8

Refer in the exhibit. A packet capture indicates that the router is not forwarding the DHCP packets that it receives on interface FastEthernet0/0. Which command needs to be entered in global configuration mode to resolve this issue?

A. ip helper-address
B. ip DHCP relay
C. service DHCP
D. ip forward-protoco

Need help for this question

hi guy

exam 100% valid CCNP Exam questions

dumps
pro
dot
com

Hi! does anyone have the latest VCE player installer.. VCE linked here needs a higher version.. Thank you very much!

@Student

The Correct Answer for me is C service DHCP without this command in global no DHCP or dhcp agent , the answer B is not correct because this option is related to DHCP snooping option 82 so this is not correct answer. Answer D is appropriate but is more acceptable and logic is C

dhcp server is by default enabled but is for some reason the administrator is off this command for troubleshooting or something else must enabled to support DHCP so the correct answer would be for ME “C”

Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result when the relay agent is rebooted? (Choose two)

A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
I think the answer is A&C
Digital say A&D…

Lab ?? or Sim.. ?

I don’t have GNS3 .. how can I study them ?? any suggestions please???

Passed today 8xx
Ospf eval
Eirgp stub
Frame relay
New questions that I can’t rmember but very different from last week, though I was going to fail
New dnd for frame relay, ipv6

Anybody who did the exam today?

I have a question about the TS tickets… after you select what you think the issue is… is there a way to verify it actually fixed the issue? Or are you pretty much just hoping you got it right and move on to the next question?

,Taking the exam today.Will give you guys feedback

whats the difference between labs sim for free users and premium membership of digital tut?

for everybody who has passed the exam, are the labs and the questions of OSPF eval and EIGRP eval correct?

thanks

I hope June to all us will not have surprise about some new changes as so on because if at June we having this Fu..kcing Surprise then I will be very mad.

Question 31

Which feature can mitigate fragmentation issues within network segments that are between GRE endpoints?

A. PMTUD
B. ICMP DF bit
C. TCP Flow Control
D. TCP MSS

Answer: D (In fact A is correct too)

Please I need correct answer for above Q Please Please

Hi All !!
I have just passed the exam with a goOOod mask (960)
All the questions were from the dumps
You can contact me via what is up : Two one two six eight two six two seven two four zero
So i can send to you the dumps

Good luck

@Anonymous
How naive do you think this community is @Anonymous ?!?!?
You want members of this community to contact you so you can peddle your product to us in hopes that we buy things from you?!?!

Tell you what @Anonymous if I would spend my $ I would spend it @digitaltut

If you want my $ @Anonymous why don’t you contact me via what is up:800 Go F*!@# Yourself

Members of this community share… they don’t sell!

I wish digitaltut would allow us to report posts so they get deleted. those guys trying to seel dumbs are pathetic!!

Hi Guys i passed the exam 30/May/2018 with 9** points
I had 53 questions.

1 Lab – EIGRP STUB
2 Sim- Eigrp Evaluation and Ospf evaluation
3 Drag and Drops- Adverse conditions, Ip DHCP Relay, ACL
About 6 new questions. Like 3 of them were questions from the 91 dump that were asked in a different way.
The Prince 91 dump very valid. 90% of exam was from there. no need to read the 477 jazzy questions
Thanks guys an godlike to everyone

Sorry i had 5 drag and drops. 3 above plus Frame relay LMI and AAA authorisation command

@vee

any BGP questions? I don’t see many in the 91 dump.

@cisconinja
Re BGP questions

There are no many questions on exam for BGP,only very basic
It was so dissapointing for me as i work day in-out with bgp,
But ull just get a question like is this private or public AS.

Cisco rather pushes and loves Eigrp instead.

HI All,
Can some share CCNP Route v7 lab manual pdf ?

Thanks
Saji

Taking exam on Saturday, I only study 91q. and jazzy DND. wish me good luck.

@Lebron James

Wishing you all the best.
Kindly update as once you are finished :)

@RockerFeller, Yes I will get back here win or lose.hehehe

Hi Guys, I backed read and I found out that there is different answer in AAA. Can you please confirm if it’s right?

Authentication
supports a local database for device access
supports encryption

Accounting
Specifies a user’s specific access privileges
enforces time periods during which a user can access the device

Authorization
Verifies Network Usage
Not supported with the local AAA

in the EIGRP Eval, did you check the router or did you memorize the answer? I need your feedback please, I am taking the exam this coming Saturday.

@cisconinja there was no BGP Question in my exam

@lebron james – you have to be at least somewhat comfortable with cisco routers and know your way around in order to pass, because they might change any of the values or IP addresses so the answers are not the same, what is the same is the way to get the answer, so understand the concept, not the answer itself.

Hay Guyzz…

Is there any way to get the CCNP Route v7 lab manual pdf?

thanks

Which command do you enter to filter only routing updates that are sent through interface GigabitEthernet0/0?
A. R1(config-if)#passive-interface GigabitEthernet0/0.
B. R1(config-router)#no passive-interface GigabitEthernet0/0
C. R1(config-router)#passive-interface GigabitEthernet0/0
D. R1(config-router)passive-interface default
E. R1(config-if)#passive-interface default
F. R1(config-router)#distribute-list 1 GigabitEthernet0/0 out

Answer: C

but i think “F” is correct please make sure this question .

Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation. Which two outcomes will result when the relay agent is rebooted? (Choose two)

A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
I think the answer is A&C
Digital say A&D…

Can someone share with me CCNP Route v7 lab manual ?

Thanks in Advance,
Sajtih