Share your ROUTE v2.0 Experience

@God
I‘m aware of that. I also took cbt nuggets and Laz courses, besides official books.
I‘m having difficulties remembering more detailed info, thats why I take a look at dumps just to double check.

@Stoo
You did more studying than i did. I used CBT nuggets and pluralsight . No books.

Thats good as well.
I also did switch and tshoot without issues, it‘s just route that‘s giving me headache

@God
Do you mean Jazzy v3 and dnd are enough to pass?

@god the 91 or the 477 questions?

Just passed the exam few minutes ago.. My Advice is to follow full digitaltut Questions with Premuim Menbership. I didn’t follow any dump. Other than digitaltut. Specially check the newly updated questions categories.

.
.
.
.
@CiscoNinja YES. ABSOLUTELY. If you use Jazzy V3 and DNDs and fail, then you should not be a network professional.
.
.
.
.

@NSK1127 i had premium membership as well. To be honest the questions are not asked correctly and are confusing (Some dont make sense or are incomplete). Jazzy v3 has complete questions and (for the most part) accurate answers.

Premium is definitely worth it. Just for the labs IMO.

@God, are you really God? Do you exist?

Is Jazzy v3 alone enough for the Multiple Choice Questions? Or do we still need the 477q?

@Cheater Yes and no i dont exist. But i am judging you right now for cheating, cheater!

@CertPrep Nickname I used both. Dont be lazy, go over the 477 questions 3 times and you will be ok. Do 100 questions at a time else you will not remember shit.

@CertPrep Nickname Right now God is working on an updated Jazzy v4 that includes all 15 NEW questions that have made a few people fail costing them $$$$$. Stay tuned

#############################################################

COMMUNITY ANNOUNCEMENT

Right now God is working on an updated Jazzy v4 that includes all 15 NEW questions that have made a few people fail costing them $$$$$.

Dont respond to scammers asking you to send them emails. Information here should be free and if you have extra $$$ to spare donate to digital tut (button on the lower right corner)
.
.
.
.
.
.
.
.
###########################################################

Where is the donate button? Yo digital Tut, how can i donate?

F***k. Dogital Tut, i thought this site is like certprepare with a donate button. God was wrong. I will put my bitcoin wallet in the updated dump so you can buy me a beer instead. I take tithes

Great! Any idea when it will be released?

Hi guys

I passed the exam last Thursday.
%90 of questions from Jazzy’s.
Labs – EIGRP stub, PBR, EIGRP eval
DnDs – Same from Jazzy’s DnD file.
I saw some new question; they were also mention in previous pages here.

Good luck everybody.

Folks,

i’ve seen a lot of tips about Jazzy v3 and 477 but reading 477 it’s more like an study guide questions. The Jazzy v3 is more real questions. I was wondering, is it real necessary study by 477?

I’ve been studying since he begin of this year and I’m thinking about scheduling my exam for next week.

hello ,
who is Jazzy aznd how i can get his dumps
someone have new vaild dumps to study ?

@god you’re God!! I can’t wait for your Jazzy v4

please I need correct answer for Q213 below, in jazzy 477 mentioned answer “C:Route available in FIB ot it verifies a reverse patch via the fib to the source” but in digitaltut has giving another answer which is “A. it check the ingress access list” with references
So which one is correct, and some of answers is different between digitaltut and jazzy 47 an q91 so which one is correct. really i been confused. most of references can see it on digital!
but still I am confuse.
How people pass the exam and the digitaltut or jazzy and they passed on both! i used both for tow exams but I failed 1st i got 735 then 779. maybe the testing center in USA mach hard than other country. I am leaving in USA most of question is different compair to these material like digitaltut or Jazzy 477 or 91Q.
Good Lock for everyone

Hi @Mustafa

some info related on cisco topics:

When a packet is received at the interface where Unicast RPF and ACLs have been configured, the following actions occur:

Step 1 Input ACLs configured on the inbound interface are checked.

Step 2 Unicast RPF checks to see if the packet has arrived on the best return path to the source, which it does by doing a reverse lookup in the FIB table.

Step 3 CEF table (FIB) lookup is carried out for packet forwarding.

Step 4 Output ACLs are checked on the outbound interface.

Step 5 The packet is forwarded.

That’s it! Looks like answer is A and jazzy had some mistakes

All interfaces on each router are participating in the EIGRP 100 process. Interface Loopback 2 on HQ-R2 is currently in shutdown mode. An engineer issues the eigrp stub command on router BR1. Which statements about the query messages sent from router HQ-R2 for a route to reach the 12.12.12.12/32 network is true?

A. Router HQ-R2 sends a query message to the feasible successor for a route to
12.12.12.12/32 network.
B. BR1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
C. Router HQ-R1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.
D. Router HQ-R1 and BR1 receives query messages from HQ-R2 for a route to
12.12.12/32 network.

Answer: C / D ??

I think it depends on version of code that is deployed on the HQ-R2, I saw someone state this based on cisco document:

If an older version of code is deployed on the hub router, it will ignore the stub TLV and continue to send QUERY packets to the stub router. However, the stub router will immediately reply “inaccessible” to any QUERY packets, and will not continue to propagate them.

In the newer code the Hub sees the spoke flag and says, ‘well, i’m not even going to bother asking/querying’

my question is, which one deployed on HQ-R2?

JAzzy V3 is enough to pass the exam. i didn’t even study 477 -lots of question

@Anonymous
Thank you

@astalavista
You’re in a wrong way. Don’t think specifically, think in generally.

Also, Prince/Jazzy 91Qs + 19 Jazzy DnDs (Attention: REWORDING) + Qs mention in previous pages here+ check the newly updated questions categories in digitaltut.

Logging Console7
Which option is one of the effects entering this command on a Cisco IOS router, with no additional
logging configuration?
A. Debug messages can be seen on the console by enabling “terminal monitor.
B. Debug messages are logged only on active console connections.
C. A user that is connected via SSH sees level 7 messages
D. The router can experience high CPU utilization

prince 91 say B. but I think is D

anyone can help?

QUESTION 41
Which technology is required on an EVN trunk interface?
A. 802.1q
B. NAT
C. VRF-Lite
D. IS-IS
Answer: A

I think is C

https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/117974-configure-evn-00.html

sorry please ignore my question 41, I think is A.

If You’ve just arrived You should read at least 5 or 10 previous pages, there are a lot of comments about questions like ‘Logging Console7’.

Logging Console7
Which option is one of the effects entering this command on a Cisco IOS router, with no additional
logging configuration?
A. Debug messages can be seen on the console by enabling “terminal monitor.
B. Debug messages are logged only on active console connections.
C. A user that is connected via SSH sees level 7 messages
D. The router can experience high CPU utilization

Yeeaa, a tricky question :)
Tested with GNS3 and hardware C1841.
I think the answer D is correct.

(config)#logging console 7
–> Debug messages are logged on active console (yes) AND in the RAM (buffer) –>#sh logging

thanks doka for your input

When OSPF is forming an adjacency, in which state, the actual exchange of information in the link?
A. INIT B. loading C. exstart D. exchange

answer B or C ?

can anyone kind enough to tell me where to find jazzy v3?
tomorrow is my exam, I just want to go through it.
please help me, I am lack of time to go through the forum page by page.

@doka

Logging Console7 is default on cisco routers/switches.

It indicates that messages like debug will be displayed on Console but You need to start some debug to see it on the console terminal. For me it’s letter B.

You’re going to have debug issues if You start ‘debbug all’ for exemplo.

=============
—-Utilizing GNS3—
=============
R6#sh logg
Console logging: level debugging, 19 messages logged, xml disabled,

R6#show processes cpu sorted 5s | ex 0.0
CPU utilization for five seconds: 1%/0%; one minute: 1%; five minutes: 2%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
140 12476 3883913 3 1.11% 1.08% 1.06% 0 HQF Shaper Backg

R6#debug all
This may severely impact network performance. Continue? (yes/[no]): yes
All possible debugging has been turned on

R6#show processes cpu sorted 5s | ex 0.0
CPU utilization for five seconds: 7%/100%; one minute: 5%; five minutes: 2%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
190 6508 1034 6294 4.31% 1.43% 0.52% 0 Exec
140 12224 3805459 3 0.95% 1.05% 1.07% 0 HQF Shaper Backg
41 1200 15270 78 0.79% 0.93% 0.26% 0 TTY Background
31 464 88 5272 0.63% 0.47% 0.13% 0 EEM ED Syslog

=============
—-Utilizing GNS3—
=============

sh logging

*May 27 22:21:56.127: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down
*May 27 22:21:56.871: %LINK-5-CHANGED: Interface Ethernet1/0, changed state to administratively down
*May 27 22:21:56.879: %LINK-5-CHANGED: Interface Ethernet1/1, changed state to administratively down
*May 27 22:21:56.887: %LINK-5-CHANGED: Interface Ethernet1/2, changed state to administratively down
*May 27 22:21:56.899: %LINK-5-CHANGED: Interface Ethernet1/3, changed state to administratively down
*May 27 22:35:25.955: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to down
*May 27 22:35:34.451: %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to administratively down
*May 27 22:35:42.075: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to down
*May 27 22:37:00.923: %SYS-5-CONFIG_I: Configured from console by console

B. Debug messages are logged ONLY on active console connections
But it’s logged also to the RAM buffer.

http://blog.router-switch.com/2013/12/configure-logging-in-cisco-ios/
“The router does not check if a user is logged into the console port or a device is attached to it; if console logging is enabled, messages are always sent to the console port that can cause CPU load.”

@route police

When OSPF is forming an adjacency, in which state, the actual exchange of information in the link?
A. INIT B. loading C. exstart D. exchange <<< B! Actual exchange of info (LSRs and LSUs) happens during Loading state.

And here are jazzy's files:

https:/ /drive.google.c om/drive/f olders/1zPsB1wW8Qt A8ThFgI_qKBhSXr8reOJKx
Remember to remove the spaces!

In a point-to-multipoint Frame Relay topology, which two methods ensure that all routing updates are received
by all EIGRP routers within the Frame Relay network? (Choose Two)
A. Use statically defined EIGRP neighbors on the hub site.
B. Create separate address families.
C. Disable split horizon.
D. Use subinterfaces.
E. Disable EIGRP auto summary.
Correct Answer: CD

I think D is wrong -> In a point-to-multipoint Frame Relay topology, sub-interfaces won’t make sense.

E could be a better option. Your thoughts?

@kir?

so what is your answer? I ask because there is two different answer from dump that I read. I do think the answer is C, hub router would not send any queries to stub router.

But i tested on gns3, hub is sending queries to stub router when I shutdown the loopback on hub

Many Thanks Timofmax@ , so that is mean all answers of Digitattut trust and correct than Jazzy 477 and 91Q!

Anyone cleared the exam today?

I’m due today and will report later in the day.
If anyone else clears please leave feedback here.

hi Tata,

thanks for your answer confirm on loading.
I unable to download jazzy.
its ok, I had study digital tut and dexter.

I will update u guys later after my exam
cheers

hmmph..passleader have different answer with

Which Cisco Express Forwarding table or tables hold forwarding information?
A. FIB table only
B. adjacency tables only
C. FIB and adjacency tables only
D. F|B,RIB, and adjacency tables

B or C

Nodes in the network are said to be adjacent if they can reach each other with a single hop across a link layer. In addition to the FIB, CEF uses adjacency tables to prepend Layer 2 addressing information. The adjacency table maintains Layer 2 next-hop addresses for all FIB entries.

https://www.cisco.com/c/en/us/td/docs/ios/12_2/switch/configuration/guide/fswtch_c/xcfcef.html

@stoo good luck!!

@route police
“In this state, the actual exchange of link state information occurs. Based on the information provided by the DBDs, routers send link-state request packets. The neighbor then provides the requested link-state information in link-state update packets. During the adjacency, if a router receives an outdated or missing LSA, it requests that LSA by sending a link-state request packet. All link-state update packets are acknowledged.”
Answer B

Loading