Share your ROUTE v2.0 Experience

I was hoping for PBR but ain’t both sim came

@anonymous. Thank you for the info. Did you use the 477 dump?

@makonem no i didn’t use them at all just focused on Prince 91 V3 and jazzy DND

I have Prince 91 not sure which version but I need jazzy DND if anyone can help please

exam next week

email : asmaa_ashour8 @ yahoo . com

it will be much appreciated

Thanks

https://www.freecram.com/question/Cisco.300-101.v2018-03-19.q230/refer-to-the-exhibit-exhibit-all-interfaces-on-each-router-are-participating-in-the-eigrp-100-process

this question came in different form configuration was given for show ip route table on HQ1 with 4 options and need to select the correct option

New drag and Drop – include frame relay configuration and refer to exhibit—– configuration qas given – you need to arrange them in order to configured DLCI for multi point interface by using Drag n drop option

A network engineer enables OSPF on a Frame Relay WAN connection to various remote sites, but no OSPF
adjacencies come up.
Which two actions are possible solutions for this issue? (Choose Two)
A. Change the network type to point-to-multipoint under WAN interface.
B. Enable virtual links.
C. Change the network type to nonbroadcast multipoint access.
D. Configure the neighbor command under OSPF process for each remote site.
E. Ensure that the OSPF process number matches among all remote sites

new question

hi please 563q is valid ?

I keep seeing people mention 91Q and Jazzy DnD, but not seeing anywhere to get them. My exam is coming up very soon. Can someone please help me out with those dumps?

bucknasty @ zoho (dot) com

Jazzy Material – Remove spaces

https:// drive.google.com /drive/folders/ 1zPsB1wW8QtA8ThFgI_qKBhSXr8reOJKx

Thanks Tera

You are the best :)

So, Redistribution sim is no longer in exam right?
therefore we just need to study sim for ospf and eigrp, ospf and eigrp eval?
also prince 91q is enough to pass, plus the DnD from Jazzy.
Am I correct?

MEHDI TAOUSS @SFR Business
Stop spamming on here

Yes on basis of last 100 comments no one has mention so far

– try logic memorize questions DND’s, 477 dump, 91 dump
– carefully read ip’s, interfaces, etc. on practices excesses …
– max. 4-5 new questions (for me)
– only 1 question from BGP, more IPV6, NAT64, NAT-PT

– What…show ip flow export?
– top talkers
– export interface config
– local status & statistics
* sent status & statistics

What … IPV6 Neighbor Discovery protocol replace of IPV4?
– CDP
* ARP
– ICMP
– IGMP

Router IOS connected Windows syslog server do not function. What is the reason?
* firewall is blocking … UDP port 514
– firewall is blocking … IP prot num 514
– firewall is blocking … TCP port 514
– firewall is blocking … UDP port 512

What … snmp-server enable traps & snmp-server host 192… traps version 2c public …?
* to allow …192.. to access syslog…
– to collect info about system network management
– to allow private communication between router & host
– to disable all SNMP info on the system

BGP topology and configuration: Why fails eBGP neighbor?
* config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config

pass with 8xx
Good luck!

@Padisson what labs did you get.

PBR, EIGRP stub, OSPF sim

helsoo

Please let me know where to find Prince 91 V3. I searched the comments, but could find V1 only.
Please help.

Hi passed today with 8xx

There are a new D&D and few question. and Prince 91 and jazz 477 and Digtut (Lab) still valid
Be careful answer will randomly need to you to be clear be choosing.

Thanks all guy. I move to switch next

Which protocols support DMVPN?
A.EIGRP B.RIP2 C.OSPF D.BGP E.ISIS
Answer ABC

BGP supports DMVPN so D is also corect

What … IPV6 Neighbor Discovery protocol replace of IPV4?
– CDP
* ARP
– ICMP
– IGMP

its actually icmp v6 that replaces arp

What … snmp-server enable traps & snmp-server host 192… traps version 2c public …?
* to allow …192.. to access syslog…
– to collect info about system network management
– to allow private communication between router & host
– to disable all SNMP info on the system

also believe the correct answer is – to collect info about system network management although worded it wrong

I will do my exam in 4 fours…
I am just studyng 91q, specificly 6 DNDs: DHCP, adverse network conditions, AAA, Frame-relay component LMI, TACACS+ACL, and Labs for PBR, EIGRP Stub, and EIGRP eval.
I hope to pass.
Please tell me any update.

taousselmehdi this guy makes you pay the dumps FAKE

Please read the explanation below @The boy and Paddison

What … IPV6 Neighbor Discovery protocol replace of IPV4?
– CDP
* ARP
– ICMP
– IGMP

Neighbor Discovery — or ND — is the protocol used by IPv6 to determine neighboring hosts, and will replace ARP which was used in IPv4. It will perform similar tasks of the Address Resolution Protocol (ARP) and ICMP Router Discovery Protocol. It’s purpose remains to get the MAC/Link Layer addresses of available hosts, and the connection information of available routers in the network.
(https://ma.ttias.be/neighbor-discovery-nd-to-replace-arp-in-ipv6/)

Please read above regarding IPV6 Neighbour Discovery Protocol

Do you think that should I study just DnD posted ?
DnDs
1. ACL types
2. Adverse Network condition
3. uRPF (lOOSE and Strict mode)
4. Tacacs+ Authentication
5. Methods supported with AAA Authorization commnd
6. Frame Relay LMI (Address registration. global addressing, etc)
7. Frame Relay Component (DLCI, PVC, SVC, etc)
8. DHCP-relay information

router(config)# ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
Which statement about the command is true?
A. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:80 is
translated to 172.16.10.8:8080.
B. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:8080 is
translated to 172.16.10.8:80.
C. The router accepts only a TCP connection from port 8080 and port 80 on IP address 172.16.10.8
D. Any packet that is received in the inside interface with a source IP address of 172.16.10.8 is redirected to
port 8080 or port 80.
this question recently added in exam

the boy thats what im saying the person saying its arp is wrong.

and MEHDI TAOUSS is the guy hard selling his ‘dump’ if u email him.
I rather give money to dexter btc wallet: 1Evkdw5GpeBX9X5Bm54nBdt7onm8vpW3VR

router(config)# ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80
Which statement about the command is true?
A. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:80 is
translated to 172.16.10.8:8080.
B. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:8080 is
translated to 172.16.10.8:80.
C. The router accepts only a TCP connection from port 8080 and port 80 on IP address 172.16.10.8
D. Any packet that is received in the inside interface with a source IP address of 172.16.10.8 is redirected to
port 8080 or port 80.
this question is in digital tut
ans B

https://www.freecram.com/question/Cisco.300-101.v2018-03-19.q230/refer-to-the-exhibit-exhibit-all-interfaces-on-each-router-are-participating-in-the-eigrp-100-process
All interfaces on each router are participating in the EIGRP 100 process. Interface Loopback 2 on HQ-R2 is currently in shutdown mode. An engineer issues the eigrp stub command on router BR1. Which statements about the query messages sent from router HQ-R2 for a route to reach the 12.12.12.12/32 network is true?

A. Router HQ-R2 sends a query message to the feasible successor for a route to
12.12.12.12/32 network.

B. BR1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.

C. Router HQ-R1 receives query messages from HQ-R2 for a route to 12.12.12.12/32 network.

D. Router HQ-R1 and BR1 receives query messages from HQ-R2 for a route to
12.12.12/32 network

answer should be C right?
anyone have any idea?

BGP topology and configuration: Why fails eBGP neighbor?
* config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config

why A?
topology is regarding eBGP neighbor, so how update-source can help?

@Armi Goodluck! Please update us after your exam.

@Paddison
what do you mean by ospf sim? do you mean by ospf evaluation sim? please clarify. thanks.

Hi!!
I have PASSED!!! yeah!!! 922 marks.
Labs: EIGRP STUB, EIGRP EVAL, PBR.
New DnD about Frame Relay LMI.
MCQ:
– What…show ip flow export?
– top talkers
– export interface config
– local status & statistics
* sent status & statistics

What … IPV6 Neighbor Discovery protocol replace of IPV4?
– CDP
* ARP
– ICMP
– IGMP

Router IOS connected Windows syslog server do not function. What is the reason?
* firewall is blocking … UDP port 514
– firewall is blocking … IP prot num 514
– firewall is blocking … TCP port 514
– firewall is blocking … UDP port 512

What … snmp-server enable traps & snmp-server host 192… traps version 2c public …?
* to allow …192.. to access syslog…
– to collect info about system network management
– to allow private communication between router & host
– to disable all SNMP info on the system

BGP topology and configuration: Why fails eBGP neighbor?
* config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config

I will go for some beers hehehe yeah!!!
thank you to all of you! See you soon at Tshoot!!

@Armi,

what do you mean by Frame relay LMI new DND. I think Jazzy DNDs have it. Isn’t it?

@Armi

– What…show ip flow export?
– top talkers
– export interface config
– local status & statistics

* sent status & statistics or the right answer is “Local status and statistics” ??

I passed today. 9xx

Here is what you need to know:

1) Dont be a dumbass and just memorize Jazzy and Prince. You will fail. Questions have been rephrased and ip addresses are different.
2) Yes, Jazzy V3 91q and prince are valid. Download bluestacks and A+ (google it if you dont know) and practice the vce from the google drive link.
3) There are a few new questions. They are all mentioned here (browse backward 7 pages and read what others have said. VRF Yellow is there and it will get you.
4) Dont waste your time with the redistribution or vrf labs. Do EIGRP Stub, PBR, OSPF and all the EVALS. I had PBR, EIGRP Sub and EIGRP eval. In the Eval all questioins and answers are the same. In STub and PBR, ip addresses were different.

I meant vrf pink **

…..
.
.
.
5) In the labs you can get help using ? (If you know what to look for) I was stuck with summarizing syntax and ? helped
6) Wr Mem does not work so does copy-run start
7)Use GNS3 to practice the labs as suggested in Jazzy V3 91Q. It helps to remember the syntax
8)DNDs are the same. They are rephrased but if you know what the answers mean, you wont get fooled.

Thanks for sharing everyone. Can someone confirm which dnd are currently there?

Tnanks @God. Keep it up!

@ Stoo
These
New DnD about Frame Relay LMI.
MCQ:
– What…show ip flow export?
– top talkers
– export interface config
– local status & statistics
* sent status & statistics

What … IPV6 Neighbor Discovery protocol replace of IPV4?
– CDP
* ARP
– ICMP
– IGMP

Router IOS connected Windows syslog server do not function. What is the reason?
* firewall is blocking … UDP port 514
– firewall is blocking … IP prot num 514
– firewall is blocking … TCP port 514
– firewall is blocking … UDP port 512

What … snmp-server enable traps & snmp-server host 192… traps version 2c public …?
* to allow …192.. to access syslog…
– to collect info about system network management
– to allow private communication between router & host
– to disable all SNMP info on the system

BGP topology and configuration: Why fails eBGP neighbor?
* config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config

@Stoo

You are better off knowing all 19 DND from Jazzy

I know i didnt research this one and i got it wrong
BGP topology and configuration: Why fails eBGP neighbor?
* config update-source…
– change ebgp-multihop value to 1
– replace maximum-paths eibgp 4 … with maximum-paths ibgp 4 import 2
– add no syncronization statement at the end of the config

@God
Thanks a lot. I‘m due on monday and will update here after the exam. Already failed once and taking it for a second time now.

.
.
.
.
.
If you know everything in Jazzy v3 you will pass. New questions wont matter
.
.
.
.
.
Cisco also puts in extra evaluation questions that do not count towards your score, so dont worry.
.
.
.

@Stoo best of luck. This time with Jazzy v3 you will pass. (as you probably have seen) most questions are there (answers though might be wrong)