Share your ROUTE v2.0 Experience

please share exams email is sinegugumk@gmail (dot )com

Is IPV6 Ospf sim appearing in the exam labs?

cleared the ccnp exam with the dumps
http://www.3cy.cn/ccie.html

@swalmeh where can i get 470q file, can you send me pls?

bayucandra03 at gmail dot com

@swalmeh can you send me 470q file too?
ethereal-dev at inbox dot ru

For OSPF Evaluation Sim, do we still need to configure the neighbor command? when it is on non-broadcast state?

@Nick when did u write the exam?

Hi,

which vce is valid ?

477Q v1.5 (procyber)
484Q v4
470Q

NICK is fake one he never passed that exam
he is a scammer
try to catch the customers , will always give a shit
ask the person about gaurantee .
He will definetly give you some others information

Hi all,

I’ve read the official cert guide from the first page to the last, then I read the foundation learning guide. I’ve created a big lab regarding all topics from both books. I’ve mastered the lab…

I started to go through the dumps a few days ago… Oh my goodness, why this guides are full of useless bullshit?..

Sorry for this noise, guys. I’m just disappointed. ((
I’m going to finish my CCNP (ROUTE+TSHOOT) and not to pay CISCO any more. Screw it!..

Passed today with XXX A big shoutout to @swalmeh, thank you, @your-buddy, Irrelevant, anybody that helped, assisted, thanks Digitaltut…..You guys are awesome!

No need to mention what was present as this has already been covered….Look at Procyber 1.5 vce, drag & drops same, be careful of process ID’s, areas, IP, interface numbers.

Moving on to the last one now, TSHOOT….

Its been real!

Peace out, see you guys in TSHOOT

@CCNP_SOON
congratulations
do you have a Procyber PDF version ?
thank you

Passed today with great result, many thanks for everyone. no new question.

Hi! can you send me updated questions 300-101 please?

disante.simone @ gmail . com

anybody has gns3 sims? can you kindly send me updated once? or vce :D
bakalbote058 @ g m a i l . c o m

Hi all
Please send me dump valid TT.TT
email d12vt7 @ gmail . com
Thanks,

Hi all
can you send me update question 300-101 please?

Thanks,

{email not allowed}

Hi all
can you send me update question 300-101 please?
Thanks,
nantuko984 @ gmail.com

scroll up a little. there’s a link for the latest vce.

Hi all
can you send me update question 300-101 please?
Thanks,
jaffnaxps1 @ gmail.com

I am still unsure over the MTU values on the EIGRP OSPF Redistribution lab.

In the practise lab the bandwidth is 10 000 and delay is 1000usec then, u just convert delay to 100usec. But 10000kbits is ethernet link and not fastEthernet?

In exam, if they state bandwidth 100 000 (which is fastethernet), delay 100usec, then we put values down as is?

Please, could anyone clarify this for me

@members
Does anyone have PDF version of this VCE “300-101-ROUTEv1.5 (updated by procyber 01.11.2017)” if yes, can you send me to to mmmexpert at yahoo dot com
thanks
MMMexpert

Dear All ,
Please can any one send to me the latest dump for CCNP route?? (mircea dot tdr @ gmail.com)
Thanks

THE below Qs i got it in my exam today:

Question 1
Which two statements about NHRP in a DMVPN environment are true? (Choose two)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic
answer: D and E
———————————————
Question 2
Which two commands do you need to implement on the CALLING router to support the pppoe client ? (choose Two)
A. peer default ip address pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
answer: B and E
———————————————
Question 3
what is supported radius server (choose two)
A) telnet
B) authentication
C) accounting
D) authorization
E) SSH

Answare:BD
———————————————–
Question 4

What from the following can cause an issue for URPF? (this could be single answer or multiple choice)
OR
Reasons why urpf may fail:
A.Assymetric routing
B.Cef not enabled
C.Urpf not applied to the traffic source
D.If it is used as ingress filtering

Answer:A
————————————————
Question 5

In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP

Answer: D
———————————————
Question 6

Refer to the exhibit. How can you configure a second export destination for IP address 192.168.10.1?
A. Specify a different TCP port
B. Specify a different UDP port
C. Specify a VRF
D. Configure a version 5 flow-export to the same destination
E. Specify a different flow ID

Answer: C
————————————–
Question 7

Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of?

A. static NAT
B. something about the ACL
C. PAT
D. dynamic NAT

Answer: C
————————————-
Question 8

Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations

Answer: C F

———————————–
Question 9

The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6 sources. Which three elements can you use
to identify an IPv6 packet via its header, in order to filter future attacks? (Choose three)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset

Answer: A C D
————————————
Question 10

Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation.
Which two outcomes will result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.

Answer: A C
———————————–
Question 10
Which command prevents routers from sending routing updates through a router interface?
A. default-metric 0
B. distribute-list in
C. passive-interface
D. distribute-list out

Answer: C
———————————–
Question 11

Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key rollover to work correctly?
A. SMTP
B. SNMP
C. Passwords
D. Time

Answer: D
———————————-
Question 12

If you configure one router in your network with the auto-cost reference-bandwidth 100 command, which effect on the data path is true?
A. The data path remains the same for all links
B. The data path changes for 10Mbps links only
C. The data path changes for all links
D. The data path changes for 10Gbps links only

Answer: A

FOR Laps 1- EIGRP-OSPF redistribution || 2- Policy Based Routing || 3- OSPF SIM || 4- EIGRP Evaluation || OSPF Evaluation

FOR 1- EIGRP-OSPF redistribution the interface Fast-Ethernet so i used distance eigrp 90 105

NOTE: for OSPF Evaluation the Q (Check the serial links connected to R3. Which statements are correct?) in dump the answer is (B. The OSPF timer values of R2-R3 link are 30, 120, 120) which is wrong the timer values not match in exam,

@Khaled, what did u do with the delay of MTU values in EIGRP-OSPF redistribution?

delay is 1000 usec, I just convert delay to 100

Thanks to Almighty today I have passed my Route exam with 921 marks especial thanks for the creator of Vce1.5 and thanks to @swalmeh and 9tut whole members who contributed for this site
same labs as swalmeh mentioned
DnD: AAA/ FRAME RELAY / LOOSE-STRICT/ IPv6 TRAFFIC FILTER
LABS: OSPG EVA/ EIGRP EVA/ PBR / OSPF EIGRP REDISTRIBYTION

all K-value for routers R2, R3 same for both interfaces fa0/0 & fa0/1

So on R2 you redistributed the serial link still and on R3, u redistribute the Fa0/0

@Khaled congratulations on your passing of ROUTE exam.
What material you studied and diid you get 9xx range.
Can you send any PDF material if you have to mmmexpert at yahoo dot com.
MMMexpert

Hello guys,
do you have the PDF of procyber procyber procyber VCE?

Thanks a lot.

@Dirk the link between R2 & R3 will be preferred to the serial link between R2 & R4. so you should used on R2 Fa1/0 not S0/0/0 (ONLY in case of Fast-Ethernet)

@MMMexpert I don’t have PDF material, for me i studied both procyber Vce1.5 and Premium Member tut.

@khalid bro can you guide me the Premium member tut if yes will provide you my email come to private

@Khaled, so in that case u redistribute Fa 0/0 and 0/1?

@Khaled, thanks and congrats again.

hello, there are updated pdf books for CCNP 300-101? On the Internet I have read that there are no arguments in the official books. What do you recommend me? Can you give me some free links?

Hi Khaled,

I just want to be sure about below question. Can you inform us about it ?

Question 5
In which scenario can asymmetric routing occur?
A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP
Answer: D (I supposed answer is A)
———————————————
Question 8
Two limitations when use NPTv6 for IPV6 to IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaceas NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations
Answer: C F(I supposed answer is C&E)
———————————–
Question 12
If you configure one router in your network with the auto-cost reference-bandwidth 100 command, which effect on the data path is true?
A. The data path remains the same for all links
B. The data path changes for 10Mbps links only
C. The data path changes for all links
D. The data path changes for 10Gbps links only
Answer: A(I supposed answer is C)

zfr.tigli at g mail com

Dear All ,
Please can any one send to me the latest dump for CCNP route?? (zafer dot tigli @ gmail.com)
Thanks

hello to all, what materials are used to study?

@John-Ahna yes sure i will
@Dirk yes F0/0 for R3 and F1/0 on R2
@Zaferbjk your answers is correct, sorry i will re post its my Mistake

Question 1
What from the following can cause an issue for URPF?
Reasons why urpf may fail:
A. Assymetric routing
B. Cef not enabled
C. Urpf not applied to the traffic source
D. If it is used as ingress filtering
Answer: A
————————————————
Question 2
Configuration snippet that looks similar to this:
ip access-list 1 permit xx xx
ip nat inside source list 1 int fa0/0 overload
What is this an example of ?
A. static NAT
B. NAT64
C. PAT
D. dynamic NAT
E. NPTv6
Answer: C
——————————————————–
Question 3
Which two routers can do OSPF route summarization? (Choose Two)
A. ABR
B. ASBR
C. Summary router
D. internal router
E. Backbone router
Answer: A & B
—————————————————–
Question 4
What is supported radius server (choose two)
A) telnet
B) authentication
C) accounting
D) authorization
E) SSH
Answer: B & D
—————————————————————–
Question 5
Which two commands do you need to implement on a router to support pppoe client ?
A. peer default ip address pool
B. mtu
C. bba-group pppoe
D. pppoe enable group
E. pppoe-client dialer-pool-number
Aswers: B and E
——————————————————-
Question 6
What does a Cisco router use as default username for CHAP authentication?
A. its own hostname
B. chap
C. cisco
D. ppp
Correct: A
———————————————————–
Question 7
What is the NHRP role in DMVPN? (Choose 2)
A. obtains the next-hop to be used for routing
B. routes the packet through the tunnel
C. identifies the PIM-SM RP used to route the packet
D. can authenticate VPN endpoints
E. It requires each tunnel endpoint to have a unique network ID
Answers: A and D
—————————————————————
Question 8
Which three NTP operating modes must the trusted-key command be configured on for authentication to operate properly? (Choose three)
A. interface
B. client
C. peer
D. server
E. broadcast
Answer: B C E
—————————————————————
Question 9
What’s uRPF checking first when the packet enters the interface?
A. It checks the ingress access list
B. It checks the egress access list
C. Route available in FIB or it verifies a reverse patch via the FIB to the source
D. It verifies that the source has a valid CEF adjacency
Ans C
———————————————————-
Question 10
The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6 sources. Which three elements can you use
to identify an IPv6 packet via its header, in order to filter future attacks? (Choose three)
A. Traffic Class
B. Source address
C. Flow Label
D. Hop Limit
E. Destination Address
F. Fragment Offset
Answer: A C D
—————————————————————
Question 11
Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key rollover to work correctly?
A. SMTP
B. SNMP
C. Passwords
D. Time
Answer: C
——————–
Question 12
Which command prevents routers from sending routing updates through a router interface?
A. default-metric 0
B. distribute-list in
C. passive-interface
D. distribute-list out
Answer: C
———————–
Question 13
Consider this scenario. TCP traffic is blocked on port 547 between a DHCPv6 relay agent and a DHCPv6 server that is configured for prefix delegation.
Which two outcomes will result when the relay agent is rebooted? (Choose two)
A. Routers will not obtain DHCPv6 prefixes.
B. DHCPv6 clients will be unreachable.
C. Hosts will not obtain DHCPv6 addresses.
D. The DHCPv6 relay agent will resume distributing addresses.
E. DHCPv6 address conflicts will occur on downstream clients.
Answer: A C
———————————–
Question 13
Which problem can be caused by latency on a UDP stream?
A. The device that sends the stream is forced to hold data in the buffer for a longer period of time.
B. The overall throughput of the stream is decreased.
C. The device that receives the stream is forced to hold data in the buffer for a longer period of time.
D. The devices at each end of the stream are forced to negotiate a smaller window size.
Answer: C
——————————-
Question 14

A route map was configured and it was distributing OSPF external routes.
A. Distributing E1 only
B. Distributing E1 and E2 using prefix list
C. Distributing E1 and E2 using access list
D. Distributing E2 routes

Answer: B
—————————————
Question 15

Which type of OSPF router can be aggregated? (Choose two)
A. the ABR
B. the ASBR
C. Backbone Router
D. Intra Router

Answer: A B
————————————-
Question 16

Which three TCP enhancements can be used with TCP selective acknowledgments? (Choose three)
A. header compression
B. explicit congestion notification
C. keepalive
D. time stamps
E. TCP path discovery
F. MTU window

Answer: B C D
————————————–
Question 17

Which three items can you track when you use two time stamps with IP SLAs? (Choose three)
A. delay
B. jitter
C. packet loss
D. load
E. throughput
F. path

Answer: A B C
———————————————–

I got also this Q but there is anw MC (F) i answer like dump

Which three problems result from application mixing of UDP and TCP streams within a network with no QoS? (Choose three)
A. starvation
B. jitter
C. latency
D. windowing
E. lower throughput
F. UDP Starvation
Answer: A C E

All above Q’s was in my exam today which i can remember

this also:
Question 7

Which command is used to check IP SLA when an interface is suspected to receive lots of traffic with options?
A. show track
B. show threshold
C. show timer
D. show delay

Answer: A

this two Q
What is the NHRP role in DMVPN? (Choose 2)
a. It requires each endpoint to have a unique network ID
b. It routes traffic through the tunnel
c. It can identify PIM-SM RPs over a tunnel
d. It can authenticate VPN endpoints
e. It provides address resolution to route traffic
Answer DE
—————————————-
Which option is the minimum logging level that displays a log message when an ACL drops an incoming packet?
a. level 3
b. level 6
c. level 7
d. level 5
answer: B

Hi all
can you send me update question 300-101 please?
Thanks,
{email not allowed}

Hi all
can you send me update question 300-101 please?
Thanks,

{email not allowed}

@Valid
the most vce file valid is
466Q v1.5 (procyber)