Share your ROUTE v2.0 Experience
| Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
@ Jil
answer to your question is “C”
https://www.cisco.com/c/en/us/support/docs/ip/interior-gateway-routing-protocol-igrp/9105-34.html
can someone please explain this
To enable BGP tunneling over an IPv4 backbone, the IPv4 address 192.168.30.1 is converted into a valid IPv6 address. Which three IPv6 addresses are acceptable formats for the IPv4 address? (Choose three)
A. 192.168.30.1:0:0:0:0:0:0
B. 0:0:0:0:0:0:192.168.30.1
C. ::192.168.30.1
D. C0A8:1E01::
E. 192.168.30.1::
F. ::C0A8:1E01
Io SNMP v3, which security level privides eocryptio if the data?
A. authMember
B. oiAuthNiPriv
C. authNiPriv
D.authpriv
ANSWERS B or D ?????
please answer me
@MALI it is D (authPriv) which is authentication and privacy and this security level offers HMAC, MD5 or SHA-1 authentication (but this is not what we need), and provides privacy through encryption (what you are asked) with the help of DES, 3DES or AES.
@@ SILVA
THANKS
can someone please explain this
To enable BGP tunneling over an IPv4 backbone, the IPv4 address 192.168.30.1 is converted into a valid IPv6 address. Which three IPv6 addresses are acceptable formats for the IPv4 address? (Choose three)
A. 192.168.30.1:0:0:0:0:0:0
B. 0:0:0:0:0:0:192.168.30.1
C. ::192.168.30.1
D. C0A8:1E01::
E. 192.168.30.1::
F. ::C0A8:1E01
Guys Where can i find Jazzy 477 , 91 and prince q91 ?
Passed using the 91Q and the 477 DD. Same as everyone else with 53Q
who have valid pls contract to me
@Blizzard, so it’s enough to pass using 91 Q?
For those that passed, is the eigrp stub lab subnet still 255.255.255.240?
For those that passed, is the eigrp stub lab subnet still 255.255.255.240 for route summarisation?
Link for Prince 91Q…
https://www.dropbox.com/s/pt3fhldl3apvxdr/300-101-91q-Prince-v1.pdf?dl=0
@blah……Am hopping that to be true.
Let me throw the question to this forum again, it might get answered by the experienced fellas this time……..this will help those coming next for route exam, too!
“Read Prince 91v1 for MCQs and Jazzy 477q for DnDs/ Sims”
Have I got above correctly ?
hello please on which page is Jazzy 477 , 91 and prince q91 ? thank you
Passed with 8xx – 53 Questions
* Studied from Prince 91, Jazzy DNDs and used Digitaltut
* NEW Drag and Drop about Frame Relay Config, Other Drag and Drop were from jazzy DNDs
* 2 Simlets – EIGRP & OSPF same as Digitaltut
* 1 Sim – EIGRP Stub same as digitaltut
* 90% questions from Prince 91 some reworded
* got about 5 new questions about ipv6, Frame Relay and DHCP
Thanks digitaltut, prince, jazzy and all who are contributing – get premium membership its worth it and no brainer.
@Lebron James. In my opinion I think its enough to pass with the 91Q. You will need the simulations and DD from the 477. Get those down and you should be good to go. I had not trouble getting through it with this strategy
@@APEX
WHAT ARE 5 new questions about ipv6, Frame Relay and DHCP ??????
hello can someone send me valid dumps?
mail: kutayulubas at gmail dot com
Ty all
Passed 8xx/1000
Exam is easy.I forgot my exam date :) so I study immediatley dump of 91 q only one day.ı guess 4 and 5 question is new but easy sorry ı dont remember them.
91q and 477 is enough to pass I guess Guys
@Blizzard pls Can u send me dumps ?
kutayulubas at gmail dot com
Ty
for all those new comers, click below link for Jazzy 477(DnDs/Sims) and Prince 91(MCQs)
https://drive.google.com/drive/folders/1fKVLXnpMrjLgxMna8wkazos1YV09XzVZ
above is all you need to pass route exam, based on previous comments!
Happy Ramadaan!
@@APEX
WHAT ARE 5 new questions about ipv6, Frame Relay and DHCP ?????? I really do not remember else I would have posted it however, I did find the new DnD question about Frame Relay, If you look at Q3 on the below link, this question was a Drag and Drop question, it asked to put the correct command syntax in the order to complete the config for Frame Realy connectivity.
https://www.digitaltut.com/frame-relay-questions
For those who want the link to 300-101-91q-Prince-v1.pdf and DND – jazzy DNDs.pdf see below link, it also contains 300-101 – 477q – correctedv31.pdf
https://drive.google.com/drive/folders/1DOkX-G-of5KRgdrfBLkEw8Ud9Nj0iJzQ
Good Luck…
Where can I find 477q vce ?
@Cihan
Are you stupid? cant you read? It’s above your comment. Even more.
@stoo those people will get ccnp too :DDD
I WOULD LIKE TO SHARE MY CORRECTED 477 + DRAG & DROP NEW + NEW QUESTIONS WHICH IS NOT IN 477 AND POOL FROM JAZZY/PRINCE/NEW QUESTIONS
THIS IS THE VCE FILE
https:// drive. google. com/file/d/1vFPAeISR8KFv_wwvXt6W41tnmvU7ZrkK/view?usp=sharing
I WOULD LIKE TO SHARE WHAT SCORE CAN YOU PROVIDE WITH THIS ALL IN ONE
I CLEAR ALL DOUBTS ABOUT SOME PROBLEMATIC QUESTIONS WITH EXPLINATION
@cedric91 check pages 110 – 120 for the downloads. They should be posted somewhere between there. You can easily search this site for them
@timm
Yes they will, but they can only wipe their ass with it. practically no brains and skills.
About question 84 477Qv31 Jazzy:
The enterprise network WAN link has been receiving several denial of service attacks from both IPv4 and IPv6 sources. Which three elements can you use to identify an IPv6 packet via its header, in order to filter future attacks? (Choose three.)
It says the answers are: BCE (Source Address, Flow Label, Destination Address). However, if there is an attack, IP addresses can be changed and the fragment offset is just an indication of a fragmented packet. Answers are (ACD):
Traffic class
Flow Label
Hop Limit
What is the correct answer on this?
Which command do you enter to filter only routing updates that are sent through interface GigabitEthernet0/O?
A. Rl(config-if)#passive-interface GigabitEthernetO/O.
B. Rl(config-router)#no passive-interface GigabitEthernet0/0
C. Rl(config-router)#passive-interface GigabitEthernetO/O
D. Rl(config-router)passive-interface default
E. Rl(config-if)#passive-interface default
F. Rl(config-router)#distribute-list 1 GigabitEthernetO/O out
Answer: C
What is true in this?
Which command do you enter to filter only routing updates that are sent through interface
GigabitEthernet0/0?
A. R1(config-if)#passive-interface GigabitEthernet0/0.
B. R1(config-router)#no passive-interface GigabitEthernet0/0
C. R1(config-router)#passive-interface GigabitEthernet0/0
D. R1(config-router)passive-interface default
E. R1(config-if)#passive-interface default
F. R1(config-router)#distribute-list 1 GigabitEthernet0/0 out
@Lebron James, I passed the exam. I only study Jazzy v3 and the question that you posted came out the exam. I am not sure also the answer. but I choose F.
what did you do in this kind of question? did you check the router etc or did you memorize the question?
EXAMPLE:
You have been asked to evaluate how EIGRP is functioning in a customer network.?
What percent of R1’s interfaces bandwidth is EIGRP allowed to use?
Hey guys, do anyone know if 477q is a must or 91q is enough?
@Enjeru, 91q from Jazzy is enough to pass the exam. I only study 91q.
@Lebron James
seems like
F. R1(config-router)#distribute-list 1 GigabitEthernet0/0 out
and access-list 1 should contain anything
access-list 1 deny 10.0.0.0 0.0.0.7
permit any
Cause distribute-list limits exactly updates, not queries or updates
@timm, you have a point. thank you
Hey stoo,
Cihan is rigt there is no vce available so far for 477 questions dump.
Passed yesterday 8xx/1000
exam is very easy.İn my opinion 477 and 91q is enough for pass to exam. 4 or 5 new question I had.I couldnt remember them but its easy.I forgot my exam date so I worked Just one day and I passed.
I had eigrp stup,ospf sim,eigrp sim
Good luck for everyone
Passed the exam today. Just review the 477q and jazzy files then you’ll be good to go.
Sim: PBR, EIGRP Eval and EIGRP Stub
Best of luck to all!
@POGI
YOUR SCORE ???
Passed exam with score 9xx. Use only Jazzy and Prince
Can someone send me 91Q to my email
spiderman _ roof at yahoo dot com
Many Thanks
@Rst7, congratulations
@stoo
I guess you’re stupid. I’m looking for vce format. Carefully look at the pdf format :)
@timm
careless people like you do not understand how to be CCNP :) :)
@Rst7, what specific Jazzy and prince you are using?
@Lebron . I don’t understand your question. I’m use only Jazzy and Prince PDF dump