Share your ROUTE v2.0 Experience

@Tipsy,

You mean jazzy 91 is 90% can help for taking exam?

Correction for eigrp stub lab

The correct summary route was supposed to be 10.2.0.0/20 but the actual lab did not summarize the routes so i used 10.2.0.0/16 and ALAS, IT WORKED! :)

@KA

Yes, without a doubt.
BUT… you have to check the forum here as some answers from 91q and 477q are different from digitut and our helpful friends here are just kind to provide valid explanation. Just backtrack.

For 91q, i think maybe 5questions have answers different from digitut and several. Example: Q23, Q28, Q40, Q58, to name a few. But the material is very good and informative. Dont worry.

For the 477q, there are also wrong and different answers so be careful.

For the labs, just take note that the IPs provided can be different (which happened to me). The scenarios are the same. I suggest to study pbr, eigrp sim&eval and ospf sim&eval. If you know the logic and concepts, you’ll getby.

Hello everybody. Today I passed it.

Only 53 questions. 3 laboratory: eigrp sim, eigrp stub, pbr and 5 dnd. Was preparing for dumps from @ prince. 477 and 91. DND and laboratory just like on the site tut.

Hello everybody. Today I passed it.
There were 4-5 questions that I did not see in any dump. 1 new dnd.

477 and 91 from the prince + laboratory and dnd from the site tut enough to successfully pass.

I wish everyone good luck!!!

@tipsy,
Thanks for kind advise

hi every one,

is this document valid and inough to study for the exam ?
ROUTE_Jan_2018.pdf

thank you all for sharing!

in ospf evaluation sim,
Question # 2
Which of the following statements is true about the serial links that terminate in R3?
A. The R1-R3 link needs the neighbor command for the adjacency to stay up
B. The R2-R3 link OSPF timer values are 30, 120, 120
C. The R1-R3 link OSPF timer values should be 10,40,40
D. R3 is responsible for flooding LSUs to all the routers on the network.

answer is A or B? both are true..

@hallfawi

Go for prince91q or jazzy91qv3 for the MCQ. Route_jan2018 is a good material but it is not updated for new questions.

@ Tipsy
Thanks for all your help so far. Please how do i get the prince 91q or jazzy 91qvs as you have said it is very helpful. I only have Route_jan2018 for the MCQ. Please help

Hi,
tomorrow I’ll go to the exam. I’ll share my experience.
@Tipsy
I didn’t find the “Adverse Network condition” in any dump. Can you specify more details?

I’m preparing with 477qV31 and Jazzy DND
thanks to all

@ Tipsy
Went through your comment again and saw that the link was posted on the 3rd of May. thank you so much. Downloaded already

@Timur,

Adverse nerwork condition DnD (Asymmetric Routing, Excessive unicast flodding..etc) is at Jazzyv3 91q also. Please backtrack to May3 and look for the link posted by Jazzy himself. :)

@Ican22,

Thanks for the correction! Good luck on your study and exam!

@Tipsy

Thanks!

is the aaa dnd in jazzy v3 correct?

@Tipsy@

Please 91Q the link for download in PDF.Please

@Tipsy thank you for your explanation!!!

hi all, Please
which statement about satateless and stateful are tre?
A-both should have additional setup
B-stateless not require but statful require.

Tnhanks in advance

@Timur

good luck man!

Hello,Can any one send me the latest pdf dumps?
Exam code:300-101
Email ID: {email not allowed}
Thank you.

Hello,Can any one send me the latest pdf dumps?
Exam code:300-101
Email ID: djosswill@gmailm .com
Thank you.

Exam passed!
Dumps v31corrected and jazzy are ok. Labs were the dame.
Only 3 new question

@Timur

Is the Jazzy v3 (91q) enough to get through the MCQ?

I edited the jazzy dnd .vce to make it an actual dnd format….if anyone wants to give me access to upload to there dropbox or google docs

@Fart

Please shared with us!

guys, where can i find prince91q or jazzy91qv3 for the MCQ.

ihave been looking for them with no success :(

@Fart, please share it with us here

dears
.
.
.
for jazzy materials

https:// drive. google.com/drive/folders/1zPsB1wW8QtA8ThFgI_qKBhSXr8reOJKx?usp=sharing

it is in page #123

any one can confirm the validation of this materials?
.
.
pls

@Fart

kindly send it to me and will share it through my dropbox to every one here.

s_hallfawi @ hotmail . com

@@ FART

@@Hallfawi

Please sharing with me 91Q VCE OR PDF .Please

Please sent to my email 91Q vce and PDF please

xtian2474 @ gmail . com

Hi, the questions premium member is valid?

@Fart please send me the vce file at nazeerf7 @ yahoodotcom

Thanks

In case someone gets confused about this:

For Jazzy 477qv31 Question 53 answer is C, however the question is incorrectly stated as the configuration only applies for VTY 4 and not to VTYs 0 – 4

Which traffic does the following configuration allow? ipv6 access-list cisco permit ipv6 host 2001:DB8:0:4::32 any eq ssh line vty 4 ipv6 access-class cisco in

Also, in order to use ports on ACLs, statement must start with “permit TCP/UDP”

Hey!
About this question “Based on the output, which option is the next hop to get to the 130.0.1.0/24 network?”
Can someone please explain why the answer is 10.20.20.1, when clearly the next hop for this network is 10.10.10.1???? Pretty please?

hi all, Please
which statement about satateless and stateful are tre?
A-both should have additional setup
B-stateless not require but statful require.

Tnhanks in advance

@Tata

Question 449 in Jazzy 477qv31

This is the BGP table (not the routing table). The * means that the route is valid and that BGP is able to use it, however the > symbol means that this is the best route and will be installed into the routing table.

If you do show ip route bgp you will see the route with next hop 10.20.20.1

@Tata, I think the router doesn’t know router to next-hop 10.10.0.1, therefore it cannot install this router in the FIB. In this case the route will use a default route via 10.20.20.1.

*I mean ‘doesn’t know routE’ and ‘the routeR will use’ ;)
There is just a typo in my previous message. )

Just took the exam this morning and passed. Prince and jazzy are valid dnd are all the same. EIGRPstub and eigrp and ospf sims. Thanks off to switch.

@404eno
Thanks for sharing and congrats!
do you remember any new questions?..

@404eno did the questions came from 91q or 477q
Thanks

I would say 90% came from 91q and like 2 or 3 came from 477

@otv6 Thanks a lot for the explanation – that was really helpful! =]

@ Marcus, also thanks for the detailed explanation – makes sense! :D

We there a lot of IPv6 questions

Are there a lot of IPv6 questions on exam?

Hi Guys, I want to ask, that if in OSPF evaluation lab in exam, you do not enter the commands on routers but your answers are correct ; then will you be awarded marks for your selection or not ??

Passed last May 10th. Jazzyv3, 477q corrected by Prince, work knowledge is all you need.
Labs: OSPF eval, EIGRP eval, OSPF sim, EIGRP stub sim

8-10 new Questions which can be answered if you really study, one question needs the actual “show ip route” of a EIGRP stub topology (choices are output of whole routing table and quite the same) so you need actual experience in routers.

Godbless to those who will take the exam. Don’t panic on Lab because most commands are not available so be resourceful in getting / workaround the desired output.

Breezy, what’s you score?
and do you remember any “new” questions?

can anybody tell me please!!!
from where i get MSCS 2012 dumps?
thanks in advance.