Share your ROUTE v2.0 Experience

Sensitive
is digitaltut and 477 q correct enough to pass

@ 1000

yes they are enough to pass

@Quest

congrats! ;)

can you remember which q-s you got from q91?
or from 477

thanks

In EIGRP Stub SIM, why are route (10.2.2.0/24 and 10.2.3.0/24) manually summarized to 10.2.0.0/16 instead of 10.2.2.0/23 ?? The correct summary route is 10.2.2.0/23, not 10.2.0.0/16.

10.2.2.0/23 covers both 10.2.2.0/24 and 10.2.3.0/24, and no other routes.

Thank you @airon.. Do you also have cbtnuggets vids or any training vids I could download?
Thanks again

Hi everyone, does anybody have a newer version of vce player? Some of the vce shared here needs a newer version. My current version is 1.0.2 … Thank you very much!

A network administrator is troubleshooting a redistribution of OSPF routes into EIGRP.
router eigrp 1
network 10.0.0.0
!
router ospf 1
network 172.10.0.0 0.0.255.255 area 0
redistribute eigrp 1
Given the exhibited commands, which statement is true?

A.
Redistributed routes will have an external type of 1 and a metric of 1.

B.
Redistributed routes will have an external type of 2 and a metric of 20.

C.
Redistributed routes will maintain their original OSPF routing metric.

D.
Redistributed routes will have a default metric of 0 and will be treated as reachable and
advertised.

E.
Redistributed routes will have a default metric of 0 but will be treated as unreachable and not
advertised.

In dumps, the answer is B, but I’m sure that the correct one is E.

y’all got anymore of them

Valid Dumps ???

Hi Guys,

Someone try to create VCE file from 477q PDF from prince?

@TheSilentLamb

thanks for answering my question about the route map.

hi all,

base on 477q correction from previous forum pages.
I make some comment in this pdf.
hope u see the comment with the correction and not duplicate the question.

https://drive.google.com/file/d/1poGndcCJ9rR6bteEY7pAJlEOPcyZYzuQ/view?usp=sharing

@TCP-Connect EIGRP 2 OSPF redistribution

OSPF defaults to E2 routes (seed cost 20) for redistribution if no cost was entered
(except for BGP – seed cost 1).

Regarding EIGRP stub: I suppose that you could use 10.2.2.0 /23. It’s more exact. I’m guessing the simulator accepts /16, too.

at the ospf and eigrp eval questions

can someone get full points without doing any show commands, just mark the correct answers?

Guys, is anyone updating the 447Q?

Which two options are limitations of stateful NAT64? (Choose two)
A. It supports DNS64 only.
B. IT is unable to route multicast traffic.
C. It supports FTP traffic only with an ALG.
D. It is unable to route VRF traffic.
E. Layer 4 supports TCP only

Some dumps say B and D
some dumps say B and E

anyone know the answer?

CCNP-Route
with what?

@rrr, updating it with new questions that are published by the people who take the test??

i think its not updated
search for q91 pdf, that has new questions from people who took the test.
dont ask to send it, in the last 5 pages u find it, its there :)

@rrr, thanks for reply. 91Q is updated by prince and now prince is not here because he already passed the exam.
we need to follow and find new questions , specially after May as CISCO put new questions almost every month.

@Dan_2_One

Which two options are limitations of stateful NAT64? (Choose two)
A. It supports DNS64 only.
B. IT is unable to route multicast traffic.
C. It supports FTP traffic only with an ALG.
D. It is unable to route VRF traffic.
E. Layer 4 supports TCP only
The correct answer is B and D

Restrictions for Configuring Stateful Network Address
Translation 64
• Applications without a corresponding application-level gateway (ALG) may not work properly with the
Stateful NAT64 translator.
• IP Multicast is not supported.
• The translation of IPv4 options, IPv6 routing headers, hop-by-hop extension headers, destination option
headers, and source routing headers is not supported.
• Virtual routing and forwarding (VRF)-aware NAT64 is not supported.
• When traffic flows from IPv6 to IPv4, the destination IP address that you have configured must match
a stateful prefix to prevent hairpinning loops. However, the source IP address (source address of the
IPv6 host) must not match the stateful prefix. If the source IPaddress matchesthe stateful prefix, packets
are dropped.
Hairpinning allows two endpoints inside Network Address Translation (NAT) to communicate with
each other, even when the endpoints use only each other’s external IP addresses and ports for
communication.
• Only TCP and UDP Layer 4 protocols are supported for header translation.
• Routemaps are not supported.
• Application-level gateways (ALGs) FTP and ICMP are not supported

Source:
www cisco com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/iadnat64-stateful.pdf

CCNP-Route

u are right

I have collected some q-s from the 477 which the people got in the exam, we should make vce of it, but when I copy from the pdf and paste it somewhere, it is a mess, grrr

can u try it? copy anything from it and paste into a word or txt

what do u get?

Which ospf area prevent LSA type 4, LSA type 5? (Choose two)
A. not so stubby
B. total stubby
C. stubby area
D. Totally not so stubby area

answers on dumps are all different

@dan_2_one

I would say B & D are the right answers. you could confirm it in GNS3

Is there any body who has valid latest dump?

@Dan_2_One
Which ospf area prevent LSA type 4, LSA type 5? (Choose two)
A. not so stubby
B. total stubby
C. stubby area
D. Totally not so stubby area

I would go with B and C, because its what a i like to call “a cisco question” is what they want you to answer, the NSSA and Totally NSSA are valid too, but in this case you could say that Stub and Totally Stubby are more valid because they permit less LSA, and also they dont mention anything about type 7 LSA

Area Type Permited LSA´s
Stub Area 1,2,3
NSSA 1,2,3,7
Backbone Area. 1,2,3,4,5
Totally NSSA 1,2,7
Totally Stubby 1,2

Hey Guys

Question 17 on the 91q has the answer C.

However, on the 577q dump, the answer is D…

Anyone know whats up?

A network engineer wants to baseline the network to determine suitability for rea|-time voice
applications. Which IP SLA operation is best suited for this task?
A. ICMP-echo
B. ICMP-jitter
C. UDP-connect
D. UDP-jitter
E. TCP-connect
F. UDP-echo

q91 says D but all the other dumps say its F.

does anyone know the answer?

@Dan_2_One
Question 17. Prince 91q
Answer is C. Because the router BR1 configures stub eigrp (makes it unable to receive queries). So the querie packet only goes to the HQ R1 router.

Dan_2_One April 30th, 2018
A network engineer wants to baseline the network to determine suitability for rea|-time voice
applications. Which IP SLA operation is best suited for this task?
A. ICMP-echo
B. ICMP-jitter
C. UDP-connect
D. UDP-jitter
E. TCP-connect
F. UDP-echo

Answer is D
Restrictions for IP SLAs UDP Jitter Operations for VoIP
This feature uses UDP traffic to generate approximate Voice over IP scores. It does not provide support for the Real-Time Transport Protocol (RTP)

Source
www cisco com/c/en/us/td/docs/ios-xml/ios/ipsla/configuration/15-mt/sla-15-mt-book/sla_udp_jitter_voip.html#GUID-00BA9FCF-71BE-46E3-9949-12C1D3804B00

@thesilentlamb

Thanks a lot. Very much appreciated.

Can you tell me which answers are wrong in Princes corrected q91 or q477?

does anyone have a list of the current errors of the 477q corrected by Prince?

jazzy dumps v2

MCQs = 94

DnDs = 18

Sims = 5

https:// drive .google.com/drive/folders/1zPsB1wW8QtA8ThFgI_qKBhSXr8reOJKx?usp=sharing

remove the spaces from link.

@Jazzy are these the most random that has been taken so far?

@18_chi

jazzy dumps v2 is enough to pass your CCNP route exam.

but I also recommend 477 updated to study before attending the exam!

Please, can you someone send me new dump or Q477 i will be much appreciated to
spiderman _ roof at yahoo dot com
Many Thanks

ok thank you.

@Jazzy thank you for your effort. I’ll check this dump.

@rrr
I did not try to convert it to vce,,I am still busy studying and trying to see if there is any new question published by the test takers

@Jazzy @Prince

Guys can anyone of you pls provide me link for valid ccnp route dumps , i will be very thankful to you people.. Most of the people talking here about Q477 dumps but i don’t know why people don’t share with each other.. Guys by helping or sharing your knowledge with other is not gona make you down.. So it my request to all members in this forum to pls cooperate.

If someone have valid dumps, kindly share here…many thanks

@Sara, if you actually read the forum, you would find the dumps. They are shared on previous pages. Thats why people are ignoring you

@Dan_2_One

I have read on page 108 and even downloaded that pdf, but my question is just to make sure that whether the changes being made by @prince in that document is correct or still there are more changes required..

@Dan_2_One

I have just a simple request that if someone have valid dumps so pls share that..

Guys, I translated Prince and Jazzy dumps in VCE but I cannot post URL here, I tried to add spaces in URL but I still cannot post here. My post simplesly don’t appear

@Lordinchains

You may use some space between URL.

@jazzy, im trying to recreate the redistribution lab in GNS but im not able to… is there something missing in the routers?

@Lordinchains please can you share with me at jose_amo_2 @ gmail.com

@Lordinchains please can you share with me at jose_amo_2 @ hotmail.com withous spaces.
Please.
thank you in advance

kindly share the drive link of 477q i need

Happy Labor Day !!

Guys is Jazzy enough to pass?

Anonymous,

Nobody knows it. Alas, nobody left any feedback since the last Saturday

@Dan_2_one

There is nothing missing in the route configuration. Just try to configure it again. Hopefully it will work fine.