Share your ROUTE v2.0 Experience
Note: The last day to take this ROUTE 300-101 exam is February 23, 2020. After this day you have to take new Enterprise exams to get new CCNP Enterprise certification. If you want to find out more about the new exams please visit here. |
The ROUTE 300-101 (ROUTE v2.0) exam has been used to replace the old ROUTE 642-902 exam so this article is devoted for candidates who took this exam sharing their experience.
Please tell with us what are your materials, the way you learned, your feeling and experience after taking the ROUTE v2.0 exam… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: Posting email is not allowed in the comment section.
Your posts are warmly welcome!
Same with me,lets hope i pass tomorrow then i am planning to give TShoot by May 15
Hey guys,
I made this DnD’s dumps from 477 and 557 with the correct answers.
please download and also check if there is any wrong answer then point out. or if anyone knows any other important DnD then share it, please.
https:// drive. google. com/open?id=1zPsB1wW8QtA8ThFgI_qKBhSXr8reOJKx
remove the spaces from the link
lol
probably will do the same, tshoot planned somewhere in may. If a pass route :-)
@prince, could you republish the labs in GNS3 again please or tell us in which page they are as I tried to find them in the last pages but could not find any??
@Jazzy
Looks good, only 234 ir wrong
Authentication:
+ supports a local database for device access
+ supports encryption
Authorization:
+ specifies a user’s specific access privileges
+ enforces time periods during which a user can access the device
Accounting:
+ not supported with local AAA
+ verifies network usage
@CCNP-route
I posted the page 2 hours ago ;-)
page 100 comment from Bob
@ Prince
ok, thanks. I already correct it.
Do you know any other important DnD which I missed?
@khamzada
congrats, but it’s not 300-115 thread
hello, is labs from digital tut enough to pass
Can anyone share the exhibit for Q442
hello, is labs from digital tut enough to pass ?
has someone a VCE PLAYER link for android?
i cannot play the 498q neither with 5.9.14 nor 5.5
thanks
Prince:
what software did u use to make the 91q vce?
passed today with 9xx/1000
chiness dumps still works.
got 5 DnD , EIGRP evaluation , OSPF evaluation, EIGRP stub.
1.frame relay
interface s0/0 <<
no ip address
encapsulation frame-relay <<
interface serial0/0.1 multipoint <<
ip address x.x.x.138 255.255.255.255
frame-relay map ip 192.168.1.1 102 br <<
2.GRE feature
IPsec : protocol used to secure tunnels.
Keepalive : used to keep other side if tunnel interface up with local side is up
mGRE : Protocol to connect multiple destinations
MSS : amount of data that a device can handle as unfragmented piece
tunnel key : used to authenticate connection
DLCI : A locally significant ID
FECN : An indicator of congestion on the network
LMI : A signalling mechanism for Frame Relay devices
PVC : A logical connection comprising two endpoints and a CIR
SVC : A circuit that provides temporary on-demand connections between DTEs
4.aaa authorization
group radius : It uses authorization information from a standards based server
group tacacs+ : It uses authorization information stored as attribute value pair in a Cisco proprietary server.
if-authenticated : It allows the user to perform the requested function once authenticated
krb5-instance : It uses a defined instance for authorization
local : It provides authorization for a limited set of functions only l
none : It instructs the network access server to proceed without requesting authorization information
Hi Peach congrats first of all,
Can you explain what is the Frame relay command question?? Was it a Lab that came for you?? Anyone else aware of this question,exam in 6 hours :)
I seen this frame relay somewhere before:
Think it’s something like this you have to fill the blanks:
++Frame-Relay++
interface —–Space Blank —— Serial0/3/1
banwith 56
space Blank —encapsulation frame-relay
space Blank—- ip address
no shutdown
Space BlanK —interface Serial0/3/1.2 point-to-point
Space BlanK –ip address 10.17.0.1 255.255.255.0
Space BlanK –frame-relay interface-dlci 100
clock rate 2000000
shutdown
Hi @Peach congrats first of all,
Can you share chiness dumps with me ? or anybody can share ?
Hello guys passed exam today was using 477q and 91q from Prince + labs from page.
Good luck! going to SWITCH now ;)
@Prince can u send me some email to you? Would like to communicate before tshoot :) if u want ofc
QUESTION 85
Which Cisco VPN technology can use multipoint tunnel, resulting in a single GRE tunnel interface on
the hub, to support multiple connections from multiple spoke devices?
A. DMVPN
B. GETVPN
C. Cisco Easy VPN
D. FlexVPN
Congrats Serphen, I m preparing 91q right now :) was it useful for you..Prince did an amazing job with it.
Naveed Again with Voucher + paid Dumps free
CISCO
CCNA R&S 325$……………..28000 pkr
CCNP (300-XXX) 300$…………29000 pkr
VMware
VCA 102$ ………… 9000 pkr
VCP 205$…………….18000 pkr
VCAP 325$……………. 32000 pkr
Amazon associate 150$………….14000
Amazon professional 300$……….28000
IBM
100$ exam price 9000 pkr
others voucher also available
Contact me 0092 321 467 0123
Which command do you enter to filter only routing updates that are sent through interface
GigabitEthernet0/0?
A. R1(config-if)#passive-interface GigabitEthernet0/0.
B. R1(config-router)#no passive-interface GigabitEthernet0/0
C. R1(config-router)#passive-interface GigabitEthernet0/0
D. R1(config-router)passive-interface default
E. R1(config-if)#passive-interface default
F. R1(config-router)#distribute-list 1 GigabitEthernet0/0 out
@prince the 477q says C while 91q says F
Yeah,
That’ s a tricky one. Both are correct. But I think that C is more correct so I probably go for in the answer in the 477q dump.
At the time I made the 91q I was at F but I changed my mined
thank you @Prince and @RouterHSN
waiting for a feedback from those who take the exam !
question 85
A DMVPN
91q was very usefull overall i get 3LAB, 4DNDs and a lot of frame relay questions
Hello, @Prince @Serphen
I’m gonna take the exam this Saturday. Can you please share valid dumps with me? Please.
fonsekasandun0 at g mail com
@Serphen,Do u remember the DnD u got ??
and Labs?
@serphen can you share 91q.vce for me..? I hope that… T.T
pds4982 a naver com please….
I just passed the exam.
Short info.
91q is almost valid, think 4 or 5 questions needs to add.
lab/sim eval eigrp – eval ospf – eigrp stub
dnd same as posted above.
When I’m home will put more info
Hi Prince way to go!! Congratulations man!!! Please share those 4-5q if u rememeber them, Exam in 4 hours or me!!
@Prince thank you soooooo much ! how much did you took ? XXXX/1000
waiting for a feedback also from you @RouterHSN
@prince
are saying that most off the exam came from the 91q that you created?
@funghet
Got 905 points
Gonna try to look for the 4 the question numbers from the 477q
Prince- congratulation
please can you share your stuff?
and what is about frame relay ,is there lab or what ?
q171
q182
q186 = but different questions – i chose the answer with track is missing in default route
q192
q237
q259
q268
q395
And from q434 tot q477 (not every one but alot)
From the questions above a lot are in q91
And this one
Features of Netflow version 9? (Choose two)
A. IEEE standard
B. IETF standard
C. ingress
D. egress
E. ingress/egress
F. Cisco proprietary
The frame relay is and DnD
You have to choose from 6 Blocks to put in 4 blanks
1.frame relay
interface s0/0 << this is the first
no ip address
encapsulation frame-relay << the second
interface serial0/0.1 multipoint << the third
ip address x.x.x.138 255.255.255.255
frame-relay map ip 192.168.1.1 102 br << the fourth
prince
please is digital tut enogh?
i just have priemum member in gigital tut
i studied all question and labs here,ist it enough
please answer me
prince
i just have priemum member in gigital tut
i studied all question and labs here,ist it enough
please answer me,
@1000 if u know overall concept which cover questions you will be OK but only questions and answers are not everything
Features of Netflow version 9? (Choose two)
A. IEEE standard
B. IETF standard
C. ingress
D. egress
E. ingress/egress
F. Cisco proprietary
Answer B and F right
@Prince
thank you in advance…
you said: 91q is almost valid, think 4 or 5 questions needs to add.
i don’t understand if you found the 4-5 questions that you told :)
@RouterHSN did you take the exam?
Serphen
can you tell me what i must study more than digital tut?
May I know where I can download the 477q? thanks
@funghet it will start 2:30PM EST
@RouterHSN
B & E
Hi all can you share the link where can I download the 477 questions Thanks!