Share your ROUTE v2.0 Experience

i love how people ask for dumps and

“pls where dumps need pass urgent”

and so on

these make me smile. sometimes cry, but it’s alright :D

@Prince:

do you have an unlocked 477 pdf that I could transform into a vce?
exam formatter gives me fcked up characters when I paste the corrected pdf in it

any idea guys?

@rrr

The 477Q PDF fonts are screwed so copy paste doesn’t work, it’s not protected. I used a OCR tool to copy past from the PDF to make an VCE file.

@Prince

ah I see

to get this clear, is this your vce?
is this made from the corrected 477 pdf?

“300-101_08-04-18.byDCD_Q498.vce”

@ HSNRouter

I’m a Mac user and it just works fine for me…

@Simo

Yes I did pass my CCNP Switch, Only trick to pass any exam is to know the concept how it works and lab up the labs a month of hard work will get you a good result.

Is there any Juniper preparation website like digitaltut ? Looking for JNCIA preparation ?

@Urgent to pass
What I did is I studied q477 and then I got premium to study other materials
Both are almost same but if you don’t know the concept it’s really hard to memorize the question
Because we don’t know how the question will be asked

I found an interesting nuance in Q345/Q347. Look carefully at the picture. What are these numbers means? It is NOT the distance between routers, it is distance between a router and a route (subnet X) – Feasible Distance. See Official Cert Guide for definitions of FD/RD. Thus, this showed scenario is impossible in real world, because you never can got FD=10 between C and NetX and the same FD=10 between E and NetX via the same direction. However, if we assume that this is still real, we get another one problem. In this case neither B or D can be the feasible successor, because RD of both NOT less than FD of router E. It’s obviously for router D. What about B? The definition about FS says “less” exactly, NOT “less or equal”. RD of B = 10, FD of E = 10, so B cannot be a FS for NetX. As we know, the “variance” works with FS only. Therefore correct answer in Q347 is “E-C-A only” and there is no correct answer for Q345. But I guess this is just a mistake in the picture and you should answer as mentioned in question (B and D for 357 and 347 respectively). What do you think about it? Could someone correct me?

@Anonymous

how can i make the vce to pdf and regarding the route i have the labs in case you need it.

@rrr

No, i did not make
300-101_08-04-18.byDCD_Q498.vce

andriod a+ vce player 5.9.14 does not read the 498 vce, it says software is outdated

wtf???

which plays that?

thanks Prince

who can convert a (maybe protected, or IDK) PDF into VCE?

Anyone have all the DnDs corrected? I think I’ve corrected like 5 or 6 already and want to make sure some of the others ones that seem wrong are either correct or…. wrong. It seems like a lot of them are incorrect on the 477q PDF to be honest.

Taco can u share your corrections,I have exam on monday and would appreciate any kind of help.Also woud love if someone can share VCE file of 477q corrected V31

Does anyone have the right answers to these new questions?

1.

The command “show ip flow export” shows:

A. sent states and statistics
B. local states and statistics

2.

Diagram with 3 routers:
+ H1 (with IPv6 IP and Loopback 1.1.1.1)
+ R1 (with IP IPv6 and Loopback 2.2.2.2)
+ R2 (with IP IPv6 and Loopback 3.3.3.3)
Running with EIGRP 100 on both routers and what command you will implement so that you will see the loopback IP of R2 to be advertised at H1

A. H1(config t)#ipv6 router eigrp 100
H1(config t)#no stub receive-only

B. R2(config t)#router eigrp 100
R2(config t)#no stub receive-only

3.

BGP updates will consume memory …. ?
1. default route
2. full update
3. partial update
4. i forget

@asdf

2. Looks similar to the EIGRP stub lab but then in question form.
Think not that hard to crack if you get it

3. Don’t know the real question but this could help:
To help reduce the memory requirements of receiving full BGP updates (BGP updates that include all routes), some ISPs give you three basic options for what routes the ISP advertises:

Default route only: The ISP advertises a default route with BGP, but no other routes.
Full updates: The ISP sends you the entire BGP table.
Partial updates: The ISP sends you routes for prefixes that might be better reached through that ISP, but not all routes, plus a default route (to use as needed instead of the purposefully omitted
routes).

It’s from
CCNP Routing and Switching ROUTE 300-101 Official Cert Guide

@Taco salad

Would you mind sharing your corrected DND to compare with the one i have to come up with a final good correction

Hello dear all

I am new for ccnp road. Could you please send me valid latest ccnp route dumps?
mahmutaydin.ma at gmail. Com

@Anonymous thanks for your comments. I am studying each question but also trying to understand the concept as you suggested me.

can anybody Please guide me the similar type of group for MCSE preparation

A oetwirk eogioeer waots ao NTP clieots ti be able ti update the lical system withiut updatog ir
syochrioiziog with the remite system. Which iptio fir the otp access-griup cimmaod is oeeded ti
accimplish this?
A. serve
B. query-ioly
C. serve-ioly
D. peer

can anyone tell me the correct answer, in 477q it says A , but a different similar question said C.Serve Only is correct answer, which one is correct

@Almost there… I have them all written down on paper at the moment.

Please share latest dump for me
anumunram at gmail dot com

@Rout,erHSN: The correct answer is serve-only

@c1sc0g33k

Why serve-only?
Serve and & serve-only seems both correct.

Why you think is serve-only better?

Hi everyone

About this question

What is uRPF checking first when the packet enters the interface?
A. Route available in FIB It verifies a reverse patch via the fib to the source
B. It check the egress access list
C. It check the ingress access list
D. Other

depends if the configuration has an access-list. If you have an access-list the answer is B, but if you haven’t it the answer is A. What do you think?

https://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.html#wp1000928

Hi everyone
(Check this sorry )
About this question

What is uRPF checking first when the packet enters the interface?
A. Route available in FIB It verifies a reverse patch via the fib to the source
B. It check the egress access list
C. It check the ingress access list
D. Other

depends if the configuration has an access-list. If you have an access-list the answer is C, but if you haven’t it the answer is A. What do you think?

https://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrpf.html#wp1000928

hello all

can i have a 477.vce ??? I can’t found it…. T.T

{email not allowed} !!

pds4982 a naver-com

@Quest

The question don’t specifies a presence of an acl so by default it’s A.

@bert

That’s because there’s no 477Q vce exists.

I know alot of people has asked it before,but since i have exam tomorrow i want to clarifying it with the experience bloggers of this group,would 477q be sifficient to Pass and which Labs and simulation should i prepare that is coming for everyone over the last few months? Your help will be appreciated.

@RouterHSN

From the inputs here, some say the corrected 477q is enough if you know the concepts.

LABS to focus: (seems that everyone gets these)
Eigrp Eval sim
OSPF Eval
Eigrp Stub
PBR sim

DnD to focus: (not seen in any dump but not too diffucult though)
1. DHCP Relay information
ip dhcp relay information option –> add suboption and the remote ID suboption
ip dhcp relay information check –> Verify relay information option (in forwarded BOOTREPLY)
ip dhcp relay information policy …… –> Define reforwarding rules (for a DHCP relay agent)
ip dhcp relay information subscriber-id –> enable a service provider to add a unique ID
ip dhcp relay information –> configured in global configuration mode applies to all interfaces

DnD from 447Q
Q234 -> is not correct in the dump
Q263
Q270
Q400
Q421
Q444
Q454
Q473

I post this earlier page 111

I made a new PDF file from the input giving by ‘EIGRP STUB_passed’ & ‘quetzal ‘ & ‘Mark’ who passed this exam and posted the questions which they remember. I also made a VCE file from it.
Total questions are 91 without the DND and LABS.

I do not know if it’s valid and do not recommed you only use this but it can help build a new dump to study.
You can use the PDF to create a VCE on your own (there is a free tool for that) because the VCE i created won’t work on other machines for some reason.

https://www.dropbox.com/s/pt3fhldl3apvxdr/300-101-91q-Prince-v1.pdf?dl=0

There are 1 or 2 questions that i corrected later, seems i found a better answer fot it but maybe not.

Hope this helps you a bit

I post this earlier page 111

I made a new PDF file from the input giving by ‘EIGRP STUB_passed’ & ‘quetzal ‘ & ‘Mark’ who passed this exam and posted the questions which they remember. I also made a VCE file from it.
Total questions are 91 without the DND and LABS.

You can download it there

I do not know if it’s valid and do not recommed you only use this but it can help build a new dump to study.
You can use the PDF to create a VCE on your own (there is a free tool for that) because the VCE i created won’t work on other machines for some reason.

There are 1 or 2 questions that i corrected later, seems i found a better answer fot it but maybe not.

Hope this helps you a bit

Thanks Prince that was extremely helpful man!! YOU R SIMPLY THE BEST!!!!!! The 91q u compiled,i downloaded those but havnt gone through them yet but i will this afternoon,are those out of the 477q dumps or have any new questions as well? Also is there a need to study from dexter at all ?? or the questions in dexter same as 477q dump in your opinion.

One thing i want to avoid is repetitive study ,if questions in Dexter same as 477q, no need to even look at them then i guess

Also whats the source of preparing the Labs,i see in 477q only has Questions no answers? should we follow digitaltut for that, and what if i m not a premium member ?

The 91q is compiled out of the 477q corrected.

Dexter and the 477q have many questions in common but in the 477 are around 100 new questions that appear more in the exam.

For Labs you can follow digital tut. (15dollar seems not the worst investment)
I also have the labs in GNS3, they are posted in this forum somewhere

Anyone have the corrected DnDs anywhere? I’ve only verified about 10 of them and I think there are around 25.

@RouterHSN

Page 100 post bij Bob.
Download link for labs

Awsome Thanks brother!! for Premium membership i can pay $15 but i see the answers are already there and questions in te 477q, so whats the point of getting Premium membership..Can you clarify that and i will proceed with the purchase…Again you have been really helpful since morning bro and I thank u alot for that

I mean i can see the answers of all the labs on digitatut lab section without being premium member then what is premium membership giving me extra?

The extra is, test if you know the cli commands in the web simulator.
But if you don´t want that it´s not worth the payment

You can also test that in the GNS3 labs which are free.

Awsome thanks man!! i will update you my result tomorrow :) Prayers needed from all

I will also try to validate the 91q for u as i will give special attention to those questions today!!

Thanks, appreciated man!

Thanks guys for your help, exam tommorow. @prince u are monster :) U going for SWITCH after?

@already passed switch in january this year
After route only trouble shoot to do