Share your ROUTE v2.0 Experience

Is Q477 version 31 the last?

Which is the right ANSWER?

Which type of information is displayed when a network engineer executes the show track 1 command on the
router?
A. information about tracking list 1.
B. time to next poll for track object 1.
C. information about the IP route track table.
D. tracking information statistics.

DIGITALTUT:
ANS: D

DEXTER: Section: 6.0 Infrastructure Services Q62
ANS: A

i can’t remember but it like
int s0/1.0
encapsulation fframe ralay lmi
int s0/0
….

pls share 477 questions vce and pdf to harryhawking @ gmail.com

vince anwser corect is A. and i have this question in my exam in yesterday

q477 pls share last ver vce & pdf to {email not allowed}

q477 pls share last ver vce & pdf to ndh0131 @ gmail.com

Hello guys,
Thanks for this forum. I just passed today with 8xx/1000

53q with 3 Labs: EIGRP stub, PBR, EIGRP evaluation
Honestly, there are questions that supposed to be new (around 7-8 questions) regarding frame relay and VPN. DnD parts involve more on Frame Relay and IP DHCP relay commands.

If you study the 477q I think you will be fine, but you cannot expect a maximum score. Probably you will get around 800-850.

Also, I suggest you not to memorize the answers. Study the questions as well because some questions were delivered in different ways but had the same choices as in dumps.

Thank you and have a good day all!

A network engineer receives reports about poor voice quality issues at a remote site. The network engineer does a packet capture and sees out-of-order packets being delivered. Which option can cause the VOIP quality to suffer?
why the answer is D. load balancing over redundant links

@Vince, the answer is A.

Got passed yesterday with 9XX,
Thank you digitaltut
Below links Dumps still valid and admin is really supportive.
Downloaded dumps instantly on purchase. its just 20 buck, really deserve as saved my huge exam fee,
Prepared my exam in just 3 days. Wowww

https://docs.google.com/document/d/13UVGpww1XpEkTVj7xakuoQ0C7nCrAzpKa9-4VFyEb30/edit

@Krd, kindly send the 477 dumps that you used to practice.
please please

@sh, you can find digitut questions here: https://www.digitaltut.com/route-questions-and-answers . Also you can find link to dexter somewhere on previous pages.

@Alex, I agree with you, but I’m just searching for most easiest way. The Dexter dump doesn’t contain intentionally mistakes, but 477Q does.

Pls kindly share vaild vce files and software dumps!
Pls don’t share fake link !

My name is Anus
Anus

F u c k people using dumps

Hello again! I’m not passed 300-101 yet, just learning. I compared three dumps (digitut (jan), dexter (jan) and 477Q) and came to the some conclusion about 477Q. First, it has a MANY mistakes. Second, they are made DELIBERATELY. I guess there about 7-8% incorrect answers. Another one conclusion about 477Q – it has many questions just for solidity. Many questions looks like came from another courses, like CCNA, for example. You can save your time if you will start from “Dexter” and then just review an additional questions in 477Q. DO NOT USE 477Q as your PRIMARY dump.

khaled April 19th, 2018
guys the dumps in which page? i couldn’t find it anywhere ..

Siegf April 19th, 2018
@asdf it can’t be C and E at the same time IMO. If you do not use “subnets” at the end of the redistribution command redistribute eigrp 65535 , E applies. Eigrp has the “no auto-summary”, you will not receive routes.
OCG:
RD1(config)# router ospf 2
RD1(config-router)#c redistribute eigrp 1
% Only classful networks will be redistributed

The other answer could it be A, by default ospf add external routes as E2 metric 20. B could it be too, if you have a loopback in up/up before the start of the proccess for eigrp and ospf, they will take the loopb ip address.

477 dumps sure enough k to pass this exam because it has a lot of strange questions

477 dumps sure not enough to pass this exam because it has a lot of strange questions

The command “show ip flow export” shows:

A. sent states and statistics
B. local states and statistics–>chose

Which answer is correct? A or B?

Diagram with 3 routers:
+ H1 (with IPv6 IP and Loopback 1.1.1.1)
+ R1 (with IP IPv6 and Loopback 2.2.2.2)
+ R2 (with IP IPv6 and Loopback 3.3.3.3)
Running with EIGRP 100 on both routers and what command you will implement so that you will see the loopback IP of R2 to be advertised at H1

A. H1(config t)#ipv6 router eigrp 100
H1(config t)#no stub receive-only

B. R2(config t)#router eigrp 100
R2(config t)#no stub receive-only

Which answer is correct? A or B?

hey all

Prince did a corrected 477 on page 108, after finishing the videos i’ll read that.

is anyone who already took an exam that way with that pdf?

note that the corrections are made after this forum discussion, not sure it is fully good, but hopefully better as the prev version

@Prince

@Dan

are the dnd-s corrent in the pdf on page 108?

Hi all,

Did the exam today, and passed,

labs- Eigrp stup, Eigrp & Ospf topologies

477Q still valid with the corrections.

Thanks everyone for your contributions.

Can anyone please recommend a reliable dump like the one being used in the CCNP switch (the IP Helper dump). That dump is reliable in the switch exam

Gratz Kip-Africa!

Good to here

@rrr

Page 108? Don’t see any DnD

@rrr

O sorry misread it.
I did check the drag and drops that people are getting in the exams.
Q234 & Q263 & Q270 & Q400 & Q421 & Q444 & Q454 & Q473

These are correct in the corrected version.

@ Prince ….thanks alot…. you are doing a great work.

Can anyone confirm that there’s ipsec related questions present on exam?

@ Kip-Africa

The Labs you were getting are the same as
Q32 & Q36-40 & Q41-44 in the 477Q file?

You only got 3 Labs/Sims

@duc congratulation for passing can you share with us your material or the dump you use . You said 477 not enough so which dump you use ?? Thanks

@prince is dump 477Q difference than Dexter dump if yes where i can find Dexter dump ??

hello there
where are the 477 dump ?
if anyone has a link to it
please post it

taimur143khan at gmail dot cm
Passldr
300-101
557 qs
$10

how can I unprotect the 477 q PDF?

@Wherelstheroute

taimur143khan at gmail dot cm
Pass ldr
300-101
557 qs
$10

Contact me for ccnp 557
For $10

@ Prince

The labs were only 3 …. same as Q32 & Q36-40 & Q41-44 in the 477Q

@Vince, why u still here… are u the vince that already took the exam..

which type of access list allows granular session filtering for upper-level protocols?
A content-based access lists
B Context-based access-lists
C Reflexive access-lists
D Extended access lists
Based on new 477=498 edited recently the answer is A but based on other sources its C
Second opinion would be great.

How accurate are we on the new vce 498 ? i just started going over that i see lots of different
answers based on 477 i have read

@dcdalmeida

Are you sure you edited 477 and added few new corrections or you edited Dexter? Because i see some different answers the version you have edited and the one i have 477.
Here are 2 different answers as of now im going through the vce

which type of access list allows granular session filtering for upper-level protocols?
A content-based access lists
B Context-based access-lists
C Reflexive access-lists
D Extended access lists
Based on new 477=498 edited recently the answer is A but based on other sources its C
Second opinion would be great.
How accurate are we on the new vce 498 ? i just started going over that i see lots of different
answers based on 477 i have read

Which configuration can you apply to a device so that it always blocks the outbound web traffic on Saturdays and Sunday between the hours of 1:00 AM and 11:59 PM?
A. time-range SATSUN absolute Saturday Sunday 1:00 to 23:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan 303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in
B. time-range SATSUN periodic Saturday Sunday 1:00 to 23:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan 303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in
C. time-range SATSUN periodic Saturday Sunday 1:00 to 11:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan 303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in
D. time-range SATSUN absolute Saturday Sunday 1:00 to 11:59
access-list 102 permit tcp any any eq 80 time-range SATSUN
access-list 102 permit tcp any any eq 443 time-range SATSUN
interface Vlan 303
ip address 10.9.5.3 255.255.255.0
ip access-group 102 in

Based on the version you have edited the answer here is A
But based on 477 it is B

Which priticils suppirt DMVPN?(three)
A. EIGRP
B. RIP2
C. OSPF
D. BGP
E. ISIS

Can you tell me the correct answer?

@RouterHSN

A
C
D

most of us ask about link for any update dump but no one respond !! come on guys we need help ..any one here ??

@sh
There you go the last updated version

remove the two trace of the link below…
http://–ww–w.m–edi–afi–re.–co–m/?j7v–bad–6b–8d–cut

Its asking for password @ Almost there..Does the VCE file works for you?

Hi I am Premium member, and I just want to confirm with if the dynamic quizes that I have found has a premium member are the same as 477q?
I just want to realize if I need just to study the quizes or also I need to study the 477q.

Thanks in advance.

@almost there

did you finish ccnp switch if yes please guide to pass it.

thanks in advance.