Share your ENCOR v1.1 Experience

I have passed today.

Total questions are 89 including 4 labs.

About 1/3 of the questions were from the old ENCOR Questions Part 4 to Part 11.

Labs were:

1: VRF Configuration:
– missing vrf forwarding CORP in my version of the exam
– static route was configured, but i was unable to vrf ping each other (then gave up).

2: OSPF DR BDR

3: eBGP Neighbor
– AS numbers were different

4: Access-list & CoPP:
– permit icmp

Thank you~ Digital tut

@LuckyTester so in short we still need to study the old questions from Part 4 to Part 11? Did you encounter any new set of questions that are not included here?

Hi Guys,

Does the TAB and question mark (?) work in the exam simulator?

@TesterJoker15
yes, we still need to study old questions from part 4-11.
no, i didn’t think i saw any new questions in mine.

@LuckyTester are the lab simulation questions exactly the same as the ones mentioned here (Lab Sims for ENCOR v1.1)? no changes?

Anyone who took the ENCOR 350-401 exam recently? Please share your experience here, including what dumps you studied @digitaltut website.

can anyone please guide me how long it takes to prepare for exam recertification ?
can anyone please share their study plan

Should I also study ENCOR 350-401 v1.1 items (Architecture Questions ~ Drag Drop Questions 2)?

Please help update the new question.

I have passed today.

Total questions are 89 including 5 labs.

1: VRF Configuration
2: OSPF DR BDR
3: eBGP Neighbor
4: OSPF DR & Summarization Sim
5: Trunk UDLD & LACP Sim

@hhhhhh Do you have any new questions?

where can i check the CoPP and Access-list SIM ?
Thanks Team!

@hhhhhh what dumps did you study on this website? Do you think Part1–5 will be enough to pass?

still asking …. which is easier ?? enarsi or encore?? i need to recert ccnp

thanks

@which-one you can’t recert just enarsi exam, to recert you need pass a core exam or two Concentrations exam

Hi all

I clear my exam today. All questions are valid go through all the sections some questions was same but answer they gave me in different way.

Totally 89 question and 5 lap

Vrf lab for sim they won’t mention vrf for sub interface check carefully

EBGP

Lacp

Ospf Dr and bdr

Vty login

All the best

@King kindly pls share what dumps you studied here on this website. Did you study everything from Part1-Part5, Part4-Part11 and Architecture Questions-Drag Drop Questions 2?

How high is the proportion of script questions (convert python to json format, python scripts) in the exam?

hello fellers of the networking world..
i need to renew CCNP so i am taking ENCOR.
Please can someone verify if v1.1 part 1 – 5 / labs is sufficient to pass?
that itself has many questions so studying old ENCOR questions is very difficult…

You should learn it all 1-5 , 4-11

Bro, if I’ve to go through new and old, it’s easier to sit down and read the book top to bottom, study it really hard. I know they can mix and match, but there’s simple an absurd, and anyone who claims had understand and memorized all new and old material is either a little Einstein or just focused on 1-5 and went through 4-11 very quickly just to say they reviewed. You want to be on safe side? Study it all… But it’ll take you long time and much effort. Me? I’ll go 1-5 and the Certification Guide… I’ll not even bother myself opening 4-11. Waste of my precious time.

@Amy, that’s all of them right? if so Noted. on the renewal track as well.

@Amy that’s a lot of questions. Have you taken the exam recently? 

Hi all

Study all the topics don’t skip anything

Guarantee you will get pass and good score

I passed my exams today.

Total questions are 89 including 5 labs.

1: VRF Configuration
2: OSPF DR BDR
3: eBGP Neighbor
4: Netflow
5: Trunk UDLD & LACP Sim

Advice:
Study all parts 1-5 V1.1 (especially) and 4-11
Also try to be quick especially on the Sims part, as the time runs like a flash during the exam.
Become a premium member, you’ll definitely be glad you did.

All the best peeps.

Thank you Digitaltut.

Are there any new Questions/Lab Sims to the exam? 

Passed exam yesterday.

89 questions all from parts 1-5/4-11

1:VRF Configuration tasks 1 and 3 exactly same numbers from here
2:eBGP Neighbor same from here just different AS
3:OSPF DR & Summarization same from here
4:Trunk UDLD & LACP all 3 tasks with same numbers as here
5:Access-list & CoPP same from here

Took me 4 months to prepare

Good luck guys

Thanks Digitaltut

congrats on the pass!
about how many questions were from parts 4-11?

I would say around 20 questions were from parts 4-11

I wrote my Encore on the 8th of may and have passed

digital tut had it 97% on the ball
they was 3 MCQ that were new
they was a new lab regarding tunnel VRF but it was quite similar to the one on this website here it asked to only configure on R10 which was half the work only.

I would say around 15 MCQ questions were from V1.0 so please study that section as well I only browsed through it twice.

What other labs you had?

…. which is easier ?? enarsi or encore?? i need to recert ccnp …. and @ABOVE I have recert b4 i know i only need 1 to recert for 3 years.

BUT which is easier enarsi or encore? noone knows??

thanks

@anyone actually know?

take CEC’s it’s easier than an exam. If you do decide to take an exam I would stick to ENASRI

hello fellers of the networking world…
thank you for your kind responses.
i acknowledge that we must also study part 4-11.
but please tell me, i’ve been looking through 4-11 and there are some same questions that also appear in 1-5. regardless, should we still study the questions of 4-11 which are not included in 1-5?

@CCNP – i noted that one- some questions are repeated – on ENCOR v1.1 Questions – Part 1 -5 other parts as well . but I can tell you if you have time learn all of them – and the most important thing i know is that time yourself very well so that you have attempted all the questions and the labs as well. The key on the labs is this : note : sh run — to see what has been configured before you attempt to make changes , then proceed to do what they want you to do. at least you will have an idea where the lab is going . I am also studying like that .

I write my Exam – about 50% questins were from 4-11 part. One completly new SIM (similar to VRF com.). About 20 % completly new questions.

Hello v1.1 Can you tell us a little more about the new SIM that you had on your exam. Is it VRF sim with a different configuration or different tasks asked for…..? Thanks

can anyone suggest me how can I renew CCNP ENCOR till August 2024 with CE credits with less price else guide me study plan to renew for exam option from this digital tut

New SIM was like vrf SIM, but exam task was to create vrf and configure new vrf across the network.

Today I have passed the exam.
There were some new questions. One of them asked about a time-range based access list. Access only weekends was allowed.
There was a new simulator in the VRF-Tunnnel topic, where you could only access to one end of the tunnel. The tunnel interface had to be configured from scratch using the “Finance” VRF, plus an interface facing to a LAN switch should be put into the VRF and a static route configured.

@Gara
congrats on the pass.
about how many new questions were there?

@Gara
and what other sims did you have?
thanks!

Overall I had 89 questions including 5 sims.

– VRF Configuration Sim (not required to create the static routes, but tunnel protection was a must)
– Rapid PVST+ and LACP Sim (With the difference that rapid-pvst was not needed, but “pathcost method long” was needed instead.)
– OSPF Advertised & Summarized Sim
– eBGP Neighbor Sim
– And a new VRF + Tunnel Sim

Passed exam today.

84 questions + 5sims

1:VRF Configuration ( similar like on this website)
2:eBGP
3:OSPF DR & BDR
4:LACP & root bridge
5:OSPF DR & BDR 2

I studied all the questions 1-5 and 4-11. Most of the questions are from this site, maybe 5-6 questions I didn’t see here. Thanks Digitaltut

Good luck guys

Guys where do i find juniper dumps

I have passed today.
Total questions are 89 including 5labs.
-Rapid PVST+ and LACP
-VRF Configuration
-eBGP Neighbor
-OSPF OSPF & Prefix-list
-OSPF Advertised & Summarized
*SIM = almost all the same with digitaltut

In my case, about 80% of questions came from ENCOR v1.1 Part 1-5.
And others were from Old ENCOR Questions. Hang in there, folks!!!

Taka, i’m congrats man. i’m coming too, still on preparing stage. how long did it take you to preper.

Hi…, someone can send me the lasted dump about ENCOR to petergacia1990 @ gmail. com

Regards.

Is it permissible to use the Tab key or the ‘?’ key for command guidance during the lab exam?

@KJ Tab no ?-Yes