Share your ENCOR v1.1 Experience

CCNP_TEST for ccnp, were your questions in digitaltut?
Thanks!

@CCNp-test. All of them!

@ccnp_test

Just found out about this site! Thanks for the update, just found out I need to recertify by the 28th, do you think 10-12 days is enough time based on your experience to attempt?

Also did you get any Python related questions?

Thanks in advance

@ CCNP Recert. Depend how many hours you put in. I study for 1 to two hours ever day for a month and labbing on GNS3. I got like 2 Python questions and 2 drag and drop. This site is legit. I also passed my CCNA here and doing ENARSI now.
Good luck bud.

@ccnp_test

nice work on passing!

where did most multiple choice come from? part 1-5? or 4-11?

Hi All,

Kindly advise if the “premium membership” for ENCOR provides a VCE test simulator?

I have just passed and recertified for another 3 years.
Thanks Digitaltut !!

I had few new questions but if you read all questions with explanations and tutorial then you should be able to answer it.
Read part 1- 5 and 4 to 11 as well.
Labs were , VRF, OSPF DR/BDR & SUMMARISATION, LACP, EBGP.
Drag and drops all from digitaltut.
Good luck guys

@Mike, Tut has their own web-based test engine and also all the EVE-NG files to practice the labs. The also have composite exams of small-med-large with large having 102 questions based off all the pool questions. You can’t tell until you purchase it but hands down the best bang for your buck for studying Encore.

Yes mike… There is simulation to test urself

Took an exam to recertify (have CCNP for more than 6 years) I had a lot of new questions. SIMs more or less the same like here, except for OSPF summary, it was rephrased. Questions were from all sections here, 1-5, 4-11. I work in the industry for quite some time and i had very hard time. Automation, virtualization and wireless are not my favourite topics. Took some effort to get this done.

Pls help me recently I failed 350 401 Exam, pls kindly advise if I sit exam again nearly end of april ? can deal with old quesiton or not pls.

Passed today

Labs- OSPF DR/BDR, 2BGP, LACP, VRF

1-5 and 4-11 valid, All sims.,, 90% from here

I found the exam extremely difficult. They put the tough SIm in the beginning and the easiest one in the last. The sim I struggled with was extending VRF. Tunnel 0 was already configured with SRC/DST, so I put the VRF forwarding CORP under tunnel 0 of both R1/R2. The tunnel was up when I checked with the show interface tunnel. Then I put two static routes using tunnel 0 as a source interface. The issue was when I tried to test the ping from R1 to host in VLAN102 behind R2, it showed unreachable. I spent so much time that I left the sim, I knew I did everything right.

BGP SIM was easy, to set up using neighbor and network commands. I accidentally put AS number 200 instead of topology which has 20, it broke the lab. I had to delete everything and start over. The labs were so buggy you have no idea.

When I was left with 6 minutes I had more than 10 questions left, I freaked out and started a rampage, I found the easiest SIM Trunking LACP stuff at the bottom of the queue, and I skipped it as there were seconds left. Also, missed one question that I knew the answer to.

It was a miracle that I passed.

My suggestion is, to study hard and also be smart. Doing dumps and thinking you’re smart to pass, not going to happen.

CCNPx4 & Witwicky

Thank you very much ! I am going to give it a shot.

Hello,

should i prepare the basic labs too?

Regards

Hi GUYS, today i passed.

All questions were from ENCOR v1.1 Questions – Part 1-5.

4 labs(eBGP Neighbor Sim, eBGP Neighbor Sim2, VRF Configuration Sim,OSPF DR+Summarization ) all labs were from here but lil bit other interpretation. Be attentive in details.

GOOD LUCK !

In addition, learn topic of ENCOR from here.

Hi everyone , how many questions are in the premium section ? How many in total we need to study for the exam ?

@MAZAKI

congrats on passing!
what do you mean learn topic of ENCOR?, do you mean the v1.1 questions or training?
there were no questions from section 4-11?

@Daska

Thank you !
1. I mean the topics on the first page, here, in the form of a table.
2. The v1.1 questions
3. I haven’t considered/learn these questions at all, only part 1-5.

But I can’t recommend not studying questions 4-11.

Took my exam today and waiting for the results.
Everything is valid here, All questions were from ENCOR v1.1 Questions – Part 1-5.

5 Labs – eBGP Neighbor Sim, VRF, OSPF DR + Summarization, UDLD & LACP SIM and Access-list & CoPP Sim. The Access-list & CoPP Sim I encountered is permitting SSH from R2 and limit traffic to 9000 bps.

Goodluck

@MAZAKI
congrats!!
can you please tell me how many days did you take to prepare exam ?

Just passed my exam successfully. I studied all the questions (1-5 and 4-11) and all questions in my exam were covered. From labs I got LACP & UDLD, eBGP Neighbor Sim, VRF config Sim, Access-list & CoPP Sim and OSPF DR & Summarization Sim. Thanks digitaltut!

@Anon

Congrats!

With the Access-List & CoPP Sim, was this the same as here?

@SJ

thank u.

It’s about 1 month, I only studied the questions v1.1, 1-5.
I just didn’t have enough time to study all the questions including 4-11.
2-3 days for the lab.

@Anonymous

I had the version with SSH, same as Nachu above.

@Anon

Re: SSH

Thanks for confirming, much appreciated.

Thanks @digitaltut

I got 84 questions (1-5 and 4-11). Not that many drag and drop. 5 sims – VRF, OSPF DR BDR, Rapid PVST-LACP, Netflow, and BGP. Good luck guys.

@nerostart

Congrats!!

With the Netflow Sim, did you have the Sim 1 or 2 from this site?

Pass.
All questions from here.part 1 -4,old part 5-11 and expride question.no new questions

Lab
Vrf,bgp,lacp,ospf(summarization,Dr, advertise using network and advertise only type 3 LSA)

1-5 seems to be v1.1, and what is 4-11? How many questions are included??
I’d like to check it before I buy it
Thank you! :)

Pass
All question were from part 1-5 1.1 and old 5-11
5 Labs CoPP with SSH VRF CORP task 1,2 BGP without using address -family access from R2
LACP, OSPF prefix list with different up address and subnets
Thank you @digitaltut ❤️❤️❤️

Exam taken today and passed:

I used study material – Part 1 to 5 only.

89 questions, inc 5 x labs.

A couple of drag and drops, no Python or JSON drag and drops.

VRF CORP >> Tunnel source and Tunnel Dest required. IP Routes same as here.

OSPF Summarization Sim 2 >> AS numbers are different and asked for a /slash 17 network summarisation.

Trunk UDLD >> Same as here.

eBGP >> AS numbers different

OSPF DR BDR Sim >> Same as here.

all the best!

Thanks Digitaltut!!

89 questions including 5 labs (ospf summarization bog neighrbor ether channel vrf with tunnel destination missing) thing is here !!
All the best!

good day people!. In the past i used this website to study for my CCNA. now this year i want the CCNP. i have doubt when you say ” question from 1-5 and 4-11″ what its means? where are this “sections”?

@layer8_problemApril

If you pay for a membership then you will see the mentioned sections, same as when you used this site for ccna.

Paid membership is worth it.

Hello, how many total questions are there to pass the exam ?

Pass the paper, total 89q, 5labs

How many questions in the pool to pass ?

Guys are these still valid ? is it worth buying the paid version , how many total questions in paid version ? Thanks

Hi everyone my is exam is today when I try to test my system is reporting is not reaching the requirement’s, I tried for different networks even I used public Ip address. is there anyone can help me to solve this issue ? thanks everyone

Hello,

My exam is schedule on Sunday and when testing my system there is a network connection issue. I have tried with 2 computers with differents internet provider and get the same issue. 2 hour ago there was no issue for me. I think there is an issue on pearsonvue.

Hi All,

Is Encor V1.1 Part 1 to 5 is enough for the exam? These Part 1 to 5 itself is about 500 questions. Do we still need to read Encor Part 4 to Part 11 ? It seems like a lot of questions that we need to cover.

which is easier ?? enarsi or encore?? i need to recert ccnp

thanks

just completed my exam, it says PASS, no other info
got 84 questions, and 5labs (89 in all)
labs:
1 – tunnel with vrf (didn’t ask for tunnel protection) – I just configured it the way I know how
2 – ebgp with AS 40 50 60 (no address family), advertise loopbacks
3 – ospf summarization, with area range commnand, asked to use lo0 as routerID
4 – udld, lacp and trunking, allow only active vlans (this one was noted at the bottom of the task list, so I almost missed this one)
5 – ospf with DR/BDR and summarization

good luck to everyone.

@digitaltut pls confirm if ENCOR v1.1 Questions – Part 1 to Part 5 will be enough to pass the exam.

I have taken my exam today and passed: total questions are 89 including 5 labs.

overall the exam was easy and the dump is valid, I haven’t seen any new questions.

labs are:

1: Rapid-pvst and trunk same us here.

2: Access-list & CoPP Sim. task one is different instead of EIGRP you are enabling OSPF.

3: OSPF & Prefix-list Sim. same us here.

4: eBGP Neighbor Sim-1 : same us here
5: VRF Configuration Sim. same us here

thanks Digital tut

@Dhahar can you pls let us know and share what dumps you studied here? Did you read everything (there are alot of questions to be honest)?
Do you think studying Part 1 to Part 5 will be enough to pass the exam?
or Do we need still to study the old questions as well (Part 4 to Part 11) and (Architecture Questions to Drag Drop Questions 2)?

@TesterJoker15

I had around maybe 5 questions from the part4-11

also had new questions, but just a variation of old questions (ex. which JSON format is valid, with different array, etc.)