Share your ENCOR v1.1 Experience

Does someone know, its possible to pass exam without LABs, or when 4 labs are incorrekt but all other answer are correct. Thanks you.

I’m reading that there are new questions that are not included on the “The ENCOR v1.1 Questions –”… before to be a premium member … Could anyone tell me if with all material (ENCOR v1.1 Questions – Part 1 – to part 4 ) , ENCOR Questions – Part 4 -11 and labs I will pass the exam.

furthermore , if I start today to become a premium user, the monthly validity of the subscription is valid until 03/14/2024, is that correct?”

@Jenzed there is no way you can pass without lab its because labs has the most weightage of atleast 40%

Test

It did not go well for me today. Do not just focus on encor v1.1 part 1-4. A lot of json/python/SD-wan questions. Im have dinner and provide what I saw.

@Player1 what other questions did you see on the exam?

@Player1, do you remember the json/python/SD-wan new questions?
Guys, does anyone have feedback on the new json/python/SD-wan questions ??

thanks

Hi @digitaltut any info on new questions please ? referencing alleged new json/python/SD-wan

Hi Digitaltut, following up on the question above. Do we really have new questions on the exam that supposed to be added here? Appreciate your response.

Passed the exam today
Rapid PVST lab missing trunk between switches
OSPF DR lab
BGP lab
Only one new question outside of what’s available here regarding Fast transition FT. SD wan questions were all from here.

Passed the exam today

LABS:
VRF Configuration Sim
eBGP Neighbor Sim
OSPF DR & Summarization Sim
OSPF DR BDR Sim 2

I had maybe 40% of questions from old encor. Also 3-5 are new questions but sorry I dont remember them.

If you want to pass learn also old Encor questions 4-11.

I passed my Exam today

I had 4 lads & 4 dragndrops,, 7 new questions, the reset of the questions are from here.

VRF Configuration Sim
eBGP Neighbor Sim
OSPF DR & Summarization Sim
OSPF DR BDR Sim 2

Thank you Digital

Passed. Mostly Parts 1 – 4 questions and 4 labs. Practice labs and use the composite quiz from this site.

passed today :). There’re some new questions but overall if you study from here 4-11 and 1-4 you’ll pass.

Sim, I had
OSPF DR & Summarization Sim
eBGP Neighbor Sim
VRF Configuration Sim
and another with Po (associate the port to the channel ) and fix a port toward another switch to be a trunk

good luck for you all

Fail today :(

91 q 4 sims

VRF Configuration (CORP) with ipsec protection
OSPF DR BDR
eBGP Neighbor
LACP port-channel between 2 switches and Trunk toward another switch

Hello @digitaltut , do you have some update about LACP port-channe LAB?
thanks

Guys, appreciated it, if you could share a latest dump with me… ashen. susl @ gmail. com

Passage 22/02.

During my switchover from CCNPE, I encountered configuration problems on some Cisco equipment, routers and switches:

1- the <> command was not accepted by some switches and routers.

2- The <> command was blocked, so I had to use other commands like …ect

3- The pc keyboard is AZERTY and for the virtual equipment is QWERTY .

for LAB questions, Configure OSPF without using the “network” statement under the “router ospf” configuration section. (this lab is old, not included in the new LAB), eBGP Neighbor Sim, VRF Configuration Sim, Rapid and LACP Sim (I only had access for switch10, not for 20 and 30).

Do you have any knowledge of these anomalies, please help me, I’ll have a second chance in the next few days?

Passed my exam on 24 february total 91 questions

Labs

VRF Configuration (CORP) with ipsec protection
OSPF DR BDR
eBGP Neighbor
LACP port-channel between 2 switches and Trunk toward another switch

Passed today my encor exam.
Dumps are valid.Read part 1-4 and part 4-11 (don’t skip these parts)

i had 4 simulations in the exam
BGP,GRE TUNNEL, OSPF WITH DR – BDR and LACP

Good luck to all

@konsanyf have you also deleted vlan1 and 10 from the trunk port toward another switch and let only vlan 100?

Bienar it depends on version in my case i had

switchport encapsulation dotq1
switchport mode trunk
switch port trunk allowed vlan 100,X
port-channel x

something like that i don’t remember

I failed
the exam date was February 27
from 91 questions only 13 was from here the remaining was totally different from this dump.
pls read other materials if you have time and don’t rely on this dump.

Hi, I just passed my ENCOR Exam, there were 5-7 new questions as long as you’ve studied the topics well you’ll definitely pass the exam. 4 Lab Sims EBGP, Rapid PVST+ and LACP Sim, OSPF & Prefix-list Sim & VRF Configuration Sim. Overall the dumps are still valid. Thanks Digitaltut. Good Luck, Everyone!

i just passed my Encor exam, there were 4 new questions and one new OSPF LAB

@CorinW Congratulations – any update for the new OSPF lab please ?

Just passed my test today. Everything is from this site. I learned ENCOR v1.1 Questions – Part 1 – 4 and 4 – 11. I had 100% on all sections but for automation-93% and security-95%. There was an OSPF lab that was a bit different where only one router was accessible and you were asked to configure OSPF using network commands. Two interfaces were in area 0 and the third area was in area 50. You had to summarize the routes in area 50 to a /18. I only saw one route from area 50 so went ahead to summarize it to 10.0.0.0 255.255.192 and used the area range command. Good luck guys. The questions are too many and so I spent a lot of time on this and am happy to move on. I had the BGP sim, trunk UDLD LACP sim, VRF CORP sim, OSPF DR, BDR SIM.

Lab VRF Configuration (CORP) with ipsec protection ? More details ?

@no_name where can i found vrf sim???? i want to study it

Hi all

Can you send me a Dump for ccnp encore

maelcarloschiticue at gmail dot com

@digitaltut, team

do you have more details about new questions or new LABs? I don’t see updates on premium member zone

thanks!

Hello community, I have a question, I hope you can help me.

I am currently a ccnp enterprise but I need to recertify this year, can I take the ENCORE v1.1 again and recertify for 3 more years?

Digitaltut, Anyway to clean up all the duplicate questions? Between V.1 1-4 and learning 4-11 it has to be about 30% duplicates in the question bank.

@knot

Take a look CECs instead

Passed today, 84 questions and 5 sims. 10 new questions, sims are valid. It was not an easy test, I barely managed.

@Road RUnner

Congrats RoadRunner! what were the sims? and were most questions from part 1-4?

Many questions from old encor. If you only study v1.1 questions, you will not pass. Sims: ebgp, gre+vrf, ospf dr, 2x switch lab.

@Road Runner
What is 2x switch lab? you have one lab twice?

Probably would be helpful to the community if you structured your Pass or Fail comments like this:

Studied v1.1 Part 1-4, Old 4-11
Pass or Fail
Total Questions=87

Labs Seen in Exam *Choose*
Rapid PVST+ and LACP Sim
VRF Configuration Sim
OSPF DR BDR Sim
eBGP Neighbor Sim
OSPF & Prefix-list Sim
OSPF DR & Summarization Sim
Trunk UDLD & LACP Sim
OSPF DR BDR Sim 2

Comments: 5 new questions seen on LISP but dont remember!

99% is from here.

passed exam today. 89Q approx 30% new or variance of digitut Q.
5 labs: eBGP, 2x VRF (1x VRF CORP, 1x VRF FINANCE) and a new OSPF lab, on R1 (area 0) create OSPF without network config and summarize the other ABRs into area 0.

Hello Digitut,

you messed up something after today update. The correct answers are not shown. Rever to the previous version!!!!!

Please may you update the website with new questions and LABs?

thanks

@Anonymous, I was going through practicing v1.1 1-2 and Older 4-6 and everything seems fine. Not sure what update you are referring to. I have been on here every day for the last month or so.

Please share if anyone has recently passed, which dumps to follow? If possible, can anyone share the latest dumps for ENCOR. I desperately need to re-certify to save my progress. Certs expire in less than a month. Email ID is coldstorage23 at gmail dot com

do ? mark or Tab keys work on the labs?

Is this Subscriptions still valid?

Passed my exam yesterday. 84 questions and 5 labs. One lab from the 5 is not in here, but its okay as it is just creating virtual lines and need to have telnet/ssh access.

The exam itself is hard. Also fortunantely, the ? and tab are working on lab.

Now the exam is not that easy..new labs and new questions which are not listed here..If you are just going to cram and sit in the exam it’s not gonna help…

Hello team , I passed my exam yesterday… It was very hard.

I had 89 questions some news I don’t remember and 50% from ENCOR v1.1 Questions – Part 1 – to part 4 ) and about 40% from ENCOR Questions – Part 4 -11 :(

labs : Rapid PVST+ and LACP Sim,( the only LAB exacly like here), in other labs we had other data with the same topology but you had to configure other devices ): Rapid PVST+ and LACP Sim, VRF Configuration Sim, OSPF DR BDR Sim, and one new lab
.
For the new lab I had 3 routers R1, R2 and R3 all of them connected to SW1 (like Y form). I had to protect R1 config to achieve the following 3 results :

local database is configured for the user “SuperAdmin” with pass “SuperUser” and with highest priviledge
the vty interfaces utilize the local user database for access and allow Telnet and SSH
Virtual terminal Exec sessions shpould timeout after 5 min of inactivity

good luck and study all questions mentioned if you want to pass… without old question it’s very difficult you can pass…

I hope @digitaltut can prepare the doc for this new lab and help you .