Share your ENCOR v1.1 Experience

Please update the new questions.

Yes we want the new questions

Any one passe exam this week ?

it is stable ? new question ? new lab ?

I wait a reply

Please update the new questions, my exam is on Friday.

Hy guys who already take the exam
during the lab exam, can the command help function such as “SHIFT+?” be executed?
or we need to remember the precisely text command

Thanks a lot

can you describe the specific SIM of Lab’s

Dear Anony….
can you describe the Lab of which Sim?

Hello in sim lab do we can using “Shift + ?” to help open command ?
or do we need to remember the exact text commands?

thanks

Guyz, please don’t delay your certification for any new Questions. Whatever Qs are here are well enough to clear the exam.
@dump: yes the “?” and “tab” does work in the exam. But its not the same as real environment, you can take help from it only if you are going in the right direction.

Does anyone know if all the questions needed to pass are in the questions by topic(Architecture through drag and drop 2)? Or do we have to look at all 3 question sections(part 1-6 and older 4-11)

you have to study all the questions.

Hi @Hasnu, please i dont understand this part comment : NetFlow Sim 2#be careful (exporter missing transport udp config, you cannot configure flexible Netflow-v9, show command displays v9 running already) … Please you can explain more info ? Gracias

@Yobana in the Netflow SIM 2 here below config should already be there on R1 right ?

flow exporter Export-R1Flow
destination 10.10.1.10
source Loopback0
transport udp 2055

However, the exam was missing “transport udp ” command, so you have to apply it based on the port given in exam question.
One more thing to notice is the question asks you to configure flexible netflow and the above flow exporter configs are by default flexible netflow. You can verify this in the exam using below command:
R1#show flow exporter
Flow Exporter Export-R1Flow:
Description: User defined
Export protocol: NetFlow Version 9
Transport Configuration:
Destination IP address: 10.10.1.10
Source IP address: 10.10.1.2
Transport Protocol: UDP
Destination Port: 2055
Source Port: 62585
DSCP: 0x0
TTL: 255
Output Features: Not Used

Above output shows Export protocol is v9 (flexible netflow. But, in case the export protocol is different you know what to do i.e. apply following command: “export-protocol netflow-v9”

Hope this helps..!

@Yobana
there are different modifications. In my NetFlow SIM2 the “transport” command was already preconfigured. But I had to specify the NetFlow-v9 command

Is there anyone who can give us any information about today’s exam? specially lab’s

Does anyone know where I can find information about the Huawei Certified ICT Associate exam?

Hello ALL,

Just Passed Exam thanks digitaltut team.

Had a total of 60 questions, including 6 labs.

There were some new questions or ones I hadn’t seen here before, but not many.

More importantly, all the labs are here. If you understand them well—not just memorize them—since they were not verbatim, you should be fine. The lab score will outweigh the few new questions.

Wishing you all the best!

@Passed, would you please tell us which LABS did you get

Thank you Digitaltut!
Passed the exam today, i definitely can recommend it!

Little late to update, but I PASSED yesterday:
– I can tell you 2 things:
— KNOW the SIMS backwards and forwards, mine were at beginning so know enough to fly through them
— Other than that, I would not waste time in final prep worrying about router/switch config questions(They know if you know that in LABS)
—— JSON/NETCONF, Wireless, SDWAN are going to be your bread and butter

VRF Configuration Sim 2
LACP & Root Bridge Sim
OSPF Summarization Sim 2
eBGP Neighbor Sim 2
NetFlow Sim 1 (not Sim 2)
Access-list & CoPP Sim(Learn all 3)

Is there a .pdf for the pool of questions. I have read the previous 10+ pages of comments and don’t see one

Hi @Hasnu and Anonymous. Thank you for the detail of the explanation and for shared ideas. Now very clear. Next week I have the exam. Thanks again

Hello, I just took my exam and I passed. I had 60 questions including 6 labs (Access-list, ospf address-family, vrf, span, lacp, CoPP) and about 10 new questions. Be very careful Cisco is very smart, the concepts are the same but Cisco has made slight modifications. Really understand the concepts of the quizzes and labs, please don’t struggle. As soon as you understand the concepts it will be fine for the exam. Thanks to digitaltut this site helped me a lot in preparing for my exam.

@AC, congrats and thank you for sharing.
You mentioned “ospf address-family”, did you mean eBGP address-family? I cannot find any sims with OSPF address-family.

Hello All,
i hv been a pioneer in this website when i prepared my ccna and ccnp back in 2017, i came back now for the suggestion of you guys, i need a legit and reliable source to prepare my GCP exam, kindly share if someone knows.
There are many online but i dont think all will be authentic.

My friend failed today.He told there were some new Qs.Pls read all the versions here.

Hi @Network_Guru,
I have yet to see any versions here. Are you able to provide a dump?

I just Pass,
Please don’t wait for new questions; do them before the Lab exam changes.
I ran out of time and only managed 35Q out of 54Q, but I still Passed the exam. Lab marks help me pass my exam.
VRF Configuration Sim 2 (same as here)
LACP & Root Bridge Sim (same as here)
OSPF Summarization Sim 2 (same as here)
eBGP Neighbor Sim 2 (same as here, )
NetFlow Sim 1
Access-list & CoPP Sim (same as here)
Good Luck everyone
Thank you Digitaltut

correction I ran out of time and only managed 45Q out of 54Q,

Hi @ll
Does anyone have a good recommendation for to get a good dump about the exam SPCORE 350-501? Thank you for your help

Unfortunately, I always encounter an error when trying to add a comment on the Service Provider website”share SPCOR Experience”.

Anonymous from today is correct:
– If you think about it test used to be 102 questions
– Now 54 with Sims so Labs are going to get you over half way to pass
– I also did not finish(hence me saying know Sims forwards and backwards) but not sure if deducted same points as if I would have gotten wrong
– When I passed last week I can tell you I did not give myself enough prep time for 4-11 so never got to it, I mean folks here say 4-6 questions, was not going to learn 600 for at most 6
– Also as Anonymous today also pointed out use this forum, last 8 or so of us all had basically same labs, I know that is logic I used

Oh and 1 last personal thought nugget; on CoPP Sim class map and policy map names are arbitrary; there is no quicker way to get flagged with a group then for same names to keep being used

Hello Dears,
I have passed the exam Today
There is 👉54 choice
👉 6 Labs
👉Labs
vrf configuration Sim 2
OSPF Summarization Sim 2 /Configure a /19 summary
LACP & Root Bridge Sim
NetFlow Sim // Not Sim 2
Access-list & CoPP Sim
eBGP Neighbor Sim 2
👉Choice questions
12 new questions have happened

I have scheduled my exam this Friday March 21st. Wish me luck. I will update here the result of the exam.

I had attempted test yesterday, but there were many new questions i havent seen anywhere, labs were quite ok, similar to what you find – BGP, OSPF, ACL/w EIGRP , NETFLOW, TUNNELING, with slight modifications ..
but man .. those new Q threw me off and i failed… good luck to all ;) – im not down on spirit – just classic cisco move to mess with us..

Is there a consensus to how many Drag & Drop questions everyone is getting?

Guys, do we need to learn also all those old questions > ENCOR Questions – Part 4 – 11 OR just the new ENCOR v1.1 Questions – Part 1 – 6?

Hi All,

can someone email latest dump from ENCOR 350-401 v1.1

ENCOR v1.1 Questions – Part 6 – NOW add NEW QUESTIONS 52 TOTAL

Guys – so I took the exam today as scheduled and PASSED! Got 6 labs and combination of 60 multiple choice / drag and drop questions. 95% of the questions are new :-( and around 10 items are in ENCOR v1.1 Questions – Part 6 (the new questions that were recently added). Not sure how I passed but I’ve studied for 3 mos and read a lot of books. This one in particular helped a lot – Kocharians N. CCIE Enterprise Infrastructure Foundation 2023.
6 Labs
VRF Configuration Sim 2
OSPF Summarization Sim 2 /Configure a /17 summary
LACP & Root Bridge Sim
NetFlow Sim 2. (this is a tricky one – read the required task carefully)
Access-list & CoPP Sim
eBGP Neighbor Sim 2

Thanks @digitaltut, i have just passed 5 minutes ago.

6 labs, 56 Q’s

Only about 7 or so Q’s i didnt recognize (I studied part 1-6 fully and only some of the topic specific questions bot very little of them)

Labs-
vrf (The Finance one)
OSPF (Area 50 summary one)
LACP & Etherchannel
CoPP (SSH version)
Netflow Sim 2
BGP

To anyone who is wondering, its totally worth it to buy premium, this was my 2nd attempt at the exam, the 1st time i spent 400usd on Boson and failed (I knew all the boson content well and yet i still failed)

@RatX

Bravo

please i want to knwo about lab OSPF (Area 50 summary one)=> mask ? !!!
vrf (The Finance one)==> ?

I wait your reply

Regards

^^^ Correction above, i spent 100usd not 400

@julia

they asked for a /18 mask just as is asked here; 255.255.192.0

it was vrf sim 2, exactly like whats on here, i was little confused at first because in the running config there was vrf definition FINANCE and also ip vrf Finance but i got it right eventually.

@RatX

ok but it is in exam must ip vrf Finance ? not vrf definition FINANCE !!!

I wait your reply

i want to knwo configuration under interface must vrf forwarding and not vrf definition FINANCE and also ip vrf Finance b ??

Engineers, do we need to learn also all those old questions?

OR just the new ENCOR v1.1 Questions – Part 1 – 6?

anyone know where is the page for premium member login? i cannot see it anymore.

@RatX did you study parts 1-6 and 4-11 too? And what about the section starting with Architecture questions? It would be very helpful to find out if cisco use the questions from all of these (it is more than 1 thousand questions). Thanks.