Share your ENCOR v1.1 Experience

labs were similar or not?

hello , How many questions are there in the exam?

i will bay Premium Member november 1 .

im feeling baddd today, got failed, too many new questions and sims

Hey everyone
despite all my efforts and studies with premium, couldnt pass the exam today.
im a network engineer with +11 yrs experience but, exam was above my knowledge span. I used to study for CCIE written exam and I remember some materials, I believe new Encor derived from that. good luck everyone

Newwwww materiallllsss!!! Very hard exam and wasn’t lucky to pass…

so many new questions! 45 new Q! Then the lab with MPLS L3VPN :(
Why they include so many new items!

hi @jinbei,
are digitaltut questions (part4-11) still on the exam as well as lab sims?

Please share more information on the new simulations.
Thanks

@Digitaltut any updates?? maybe you can share some questions you’ve got.
Some of us have this exams october :(

Passed the exam today. As earlier said in this section we have minor changes, Got 91 questions with 4 Labs( VRF, OSPF DR, eBGP, new etherchannel+ vlan).
There are quiete some new questions but most of the questions rely on old concept.
Thanks to Digitaltut on providing questions + key concept knowledge.

Guys somebody should please help me with the latest dump update, i just hope these ones i have is till current…. please share me via email, g irl ade 00 @gmail .com, no space please.. help help help me please, my exam is nearby

hi @Vice,
so we should still read the part4-11 on digitaltut??

@Digitaltut how many questions added in 1.1 ? Labs the same or new ones ?Previous questions from section 4-11 all need to be studied ?

I went through all the sections in digitaltut +part 4-11 in particular.
my first 3 labs were typically the old onces just names and IP address changed.
all OSPF configurations sectcions should be well mastered + authentication.
Take also the recommendation of MMMExpert to feel confortable.
Goodluck guys.

9TUT thanks for putting new v1.1 Section-1 and 4 lab sims(Draft version)
Your ask is to study existing sections 4 to 11 and new ones.
Please check and try to consolidate-reduce questions what members can study.

Hi All, try to become premium member and contribute. 9TUT is good for all CISCO exams.
Good luck to all going for exam.

Hi guys I have an exam on 18 Oct .I have been reading 350-402 material .Please can anyone share new dumps with updated material .My email is {email not allowed} .Thank you in advance.

my email is shepherd 021988 @gmail .com

Passed exam today. Maybe about 10/15 questions I hadn’t seen before. Got eBGP, OSPF BDR DR, VRF and Rapid PVST+ LACP labs. The same ones in the new v1.1 section. Thank you Digitaltut!

Congratulations BillyGunner ,well done .

BillyGunner, can you share more details? You only used new section 1.1? Despite the 15 new Q, all others are from this new section 1.1? Need to renew my cert soon. Thanks.

@dkccie

Most of the questions were from ENCOR v1.1 Questions AND part 4-11
At least 10 questions were new to me, that I had not seen on this site
There were some new DNAC, Wireless, Mobility Express, IGMPv3 and python (json) ones

all new questions and material, I was shocked entire exam and got failed

@Hector

Did you go through the new section 1.1 and old 4-11?
what about the labs?

took an exam today and faced at least 25-35 new questions :(((

HELLO EVERYONE
BEWARE OF COMPELETLY NEW QUESTIONS AND LABS. 30% OF QUESTIONS WERE NEW MATERIAL AND REST FROM ENTIRE PREMIUM. I DID MY BEST BUT A LACK OF KNOWLEDGE ABOUT NEW MATERIAL DIDNT LET ME TO PASS THE EXAM. HOPE NEXT TIME I WILL!

Hello everyone, Cisco is making an offer to be able to take the exam a second time if you do not pass.

https://learningnetworkstore.cisco.com/cisco-study-bundles/encor-exam-safeguard-offer-plus/CEREX-ENCOR-027797.html

Hey guys, I just did the premium membership, how can I download or convert this dump to PDF please?

All,

I have scheduled exam for 16th Monday and looking at latest seems new questions and nobody has luck to clear. Any update on new question additions.?

Hi all @Sam ,all the best .@Hector ,@Sarah and @Omar ,Better luck next time .Did you go though the parts 4-11 as well or you had only used v1.1 ?

I took an exam yesterday and failed, all new materials which I never seen on this site before.

all new materials you never seen on this site?

Hi Sam84,

Please update us with your exam. How did it go? Approximately how many new questions did you get? Can one still pass it with the materials here? Appreciate your response in advance.

Hello everyone..

I took the CCNP exam today. hopefully I have passed.. my results are quite nice, but overall result is still pending. however I do have 100% from Architecture, 100% from Network Assurance, 90% from Security, 80% from Virtualisation, 100% from Autamation and “pending” from Infrastructure..
I had 90 questions and 4 lablets: all labs were from the new 1.1ENCOR labs and there were none or maybe 1 or 2 questions that I haven’t seen before…
I had these lablets:
VRF Configuration Sim
Rapid PVST+ and LACP Sim
eBGP Neighbor Sim
OSPF & Prefix-list Sim

good luck to everyone!

labs were same?

@Roman
what about question’s

Yes..the same labs as described here in ENCOR v1.1

I have been learning mostly thru ITexams, then I went thru all of the questions here (new and old ones). Then I practiced a lot in GNS3..I have re-created all the labs and was playing with it.
I think they haven’t added a lot of new stuff..as I said..I’ve seen practically all of them either here or at ITexams(there are more than 800 questions to go thru, for a price of course)
and finally I practiced Cisco ENCOR E-learning and Exam Bundle v1.2 – final exam, which was a part of the whole bundle I’ve got beside the voucher for the test.

I still don’t know the result of my exam…but I’m staying positive :)
good luck to everyone again! don’t worry you’ll pass, just practice!!!

Hey guy, I can I find the document that include the LABs?

@Roman congrats, hopefully you’ll have good news soon.

When you say 1-2 questions haven’t seen before, you worked only the new 1.1 section, or went trought parts 4-11 or what?

Thanks

It is official now..I have passed it!

@dkccie: ALL of them and more! as I already stated…

Can someone validate if lab materials and exams are valid here in digitaltut. I am plannning to get premium membership. Your reply is highly appreciated

I sat the exam on Oct 12th and all 4 labs I got, were ones that are covered here on digitaltut. For my test, there were at least 10 questions I have not see on this site, the rest were all covered in ENCOR v1.1 Questions and the ENCOR part 4-11. It definitely helped me pass the test, but use other study materials and know the concepts thoroughly! Good luck!

@Roman is there dump for ENCOR v1.1?
On premium membership ,can you send the link to me??

@BillyGunner the labs you got were the ones related to 1.1 version or you had also old lab simulations like netflow and SPAN ?

Anyone know where I can find the Book 350-401 pdf?

@Roman ,congratulations ,lets us link up to joint study for ENARSI if thats your next step .@Black Knight ,share your email address I can assist you with that.

@Vocodex
The 4 labs I got were in the ENCOR v1.1 section of the labs. VRF, OSPF DR BDR, Rapid PVST+ / LACP and eBGP

Why did they delete the comments where two users indicated that they failed their exam today?

@Deleted comment Fail: They are fake comments posting from one person.

Hi, did anyone pass just studying the new ENCOR v1.1 Questions – ENCOR Questions- Part 4 to 11? Also the Simulators? I’,m starting my review today. Exam is on December.

Thank you

@BillyGunner can you specify which lab subject did you get?