Share your ENCOR v1.1 Experience

@digitaltut, any updates on new questions? My exam is on coming Wednesday.

@CCNP-2024 same as A10. Thanks will be leaving this site. see you in 2 years again… sigh…

No need to take another exam, take CECs instead

Hi guys, I passed and the test was 52 questions + 6 labs

– CoPP with SSH
– eBGP (AS 100)
– LACP + Vlan 20 Priority
– VRF R22
– OSFP Area 40
– Netflow (Exporter_NetFlowENCOR + Get Http)

Thank Digitaltut
I passed

(6 Labs + 52 MCQ)
VRF Configuration Sim 2 (same as here)
LACP & Root Bridge Sim (same as here)
OSPF Summarization Sim 2 (change PID, router-id and /16 summarize)
eBGP Neighbor Sim 2 (L0, L10 and L20 all /32 advertised)
NetFlow Sim 2 (source vlan 10 and icmp-echo to loopback of SW1)
Access-list & CoPP Sim (host ACL 192.168.24.124 only and Telnet)

I passed somehow. The labs are the same as the guys who wrote above, with minor variations. Out of 52 questions, I saw half for the first time, so if you don’t understand the technology and mechanisms well, I think it’s better to wait for Digitaltut to release an update. Good luck to everyone.

freikofel can you share the new question of the exam, here or with digitaltut so they can add on

Please share new updated questions everybody here says that some questions are now listed here @digitaltut

@annonymous Unfortunately, I don’t remember them to be able to share them with you precisely, because I was under stress. What is certain is that most of the questions were in the areas of SD-WAN, automation (JSON, python) and wireless

Anyone recently took the exam ? Any new questions ?

Anyone took exam recently?

anyone who passed exam – from which parts most questions came (part 5, part 6)?

Just passed the exam. Most of the premium content was in the exam. Some new multiple choice Qs.

I got Labs similar to the comments above with slight tweaks so make sure you understand the technology.

Thought I’d failed!

Please if anyone pass the exam , share his experience , i have exam next week

Hi everyone !
First of all Thank you @digitaltut for provided material.
Labs were OSPF (advertise with network command),eBGP (address family),access list with CoPP configure ICMP,VRF Configuration 2, Netflow 2,LACP with Root root bridge.
So all the labs are listed here are valid.
There were couple new questions but if you learn all the material listed here you should be fine answering the questions as well.
Good luck everyone and wish you happy new year!

Passed the exam, a few days ago.
Exam starts with 6 labs and then 52 multiple-choice questions.
Labs:
– CoPP with SSH
– eBGP
– LACP + Vlan 20 Priority
– VRF R22
– OSFP Area 40
– Netflow (HTTP GET and not ICMP-ECHO)

Multiple Choice Questions:
You need to understand the concepts, because even after practice of 600 questions from here or other exams, … the exam had 40% totally new questions, I never saw before. Difficult & confusing questions. There were brand new drag & drop questions too.
I don’t know how I pass.

Hello,
Would any one be kind and share the dumps file/link? I am planning to renew my ccnp in the next period
Thanks!

I have exam next week… studying all the ques in Digital Tute is not enough to pass the exam?

Hi Any one please assist how to configure,, Netflow (HTTP GET and not ICMP-ECHO) with http get

#http get http://10.12.1.2 source-port 80 -is it correct?

Hi,

Config Netflow with Get

#ena
#conf t
#flow exporter Export-NetFlowData
#destination 10.10.1.10
#exit
#ip sla 10
#http get http : / / 10. 10. 1. 100
#frequency 600
#exit
#ip sla schedule 10 life forever start-time now
#end
#wr

Anyone pass the exam recently?

Hi everyone, I passed the exam today.
Exam has 50-55 questions and 6 labs . Labs in the exam is the same and similar with digitaltut.
If learn well dont worry. I have learned V1.1 Part1-6 / Part 4-11 and all drag and drop questions.
But questions in the exam 40-50% is different. There were new different questions.
Goodluck . Thank you @digitaltut.

@digitaltut are you plan to update questions? Seems that the exam have more than a half different

Hi everyone, and happy new year!

I was wondering if the new questions are going to be updated, I have an exam in the next week…

Just passed the exam thank god, I got 6 Labs all from here, and 52 question most of them are from the 1-6 parts (I have not read the old parts).
good luck everybody!

HELLO @ENCOREPASS

Can you share with us which SIM you had in the exam?

@Anonymous can u provide new questions which was there in your exam

Pass the exam. Few new questions and digitaltut is more than enough to pass the exam. 6 Sims and 58 Ques. All sims are here

Hii!!

pass the exam today!!!!

6 labs
– CoPP with EIGRP
– eBGP (AS 100)
– LACP + Vlan 20 Priority
– VRF FINANCE
– OSFP Area 40
– Netflow (Exporter_NetFlowENCOR + Get Http)

and 58 questions!!!

CoPP with EIGRP , can you explain? are we filtering based on UDP 993 or mcast address?

@CCNP-2025
I think he means the lab that we have already published.
You have the lab with EIGRP in “Access-list & CoPP Sim”

Its just :

R10(config)#ip access-list extended 150
R10(config-ext-nacl)#5 permit eigrp any any

Regards,

Hi, guys

What is LACP + Vlan 20 Priority lab?

Passed the Exam yesterday. The labs on here were spot on. About 90% of the questions were from the new 1.1 questions on here. These were the labs aswell:

– CoPP with EIGRP
– eBGP (AS 100)
– LACP + Vlan 20 Priority
– VRF FINANCE
– OSFP Area 40
– Netflow (Exporter_NetFlowENCOR + ip sla icmp-echo)

@all

Guys,when u say “OSPF Area 40”

You mean the one with 3 areas like https://www.digitaltut.com/ospf-summarization-sim ?

Failed exam, so many new questions, labs new the same, tons of new questions wireless , automation

@digitaltut I will retake exam, please update so many new questions

@Pass exam. Few new questions (6-7) and new dag and drop questions and new question with new scheme.. I have studied all questions from this Filee and i have read sdwan guide. In drag and drop here answers but in exam 3 (traditional firewall/application aware),

Creat / betwiin z4
zzb.bz4bsQe

How can I get latest ENCOR dump? Can someone share . Thank you

Can someone share the ENCOR dump

First of all Thank you @digitaltut for the provided materials

No new update since November, Please help and update.

My exam is supposed to be this coming weekend, I only have like 5 days now.

People are already testifying of new questions.